Festo Corp.
Islandia, NY 11749
Linear Thruster withstands torque up to 885 in. lb.
DFP combines ball splines and pneumatic cylinders to provide high torque linear thruster. Ball spline doubles as cylinder's piston rod and is preloaded to provide minimal angular deflection of tool plate. Cylinder bore diameters include 10, 16, 25, 32, 50, and 80 mm. DFP thruster is suitable for applications that cannot use larger linear thrusters which utilize tool plate guided by 2 or more...
Read More »
Valve Terminal features clean design for food handling.
CDVI Pneumatic Valve Terminal offers 4- to 12-valve configurations for supporting combinations of 5/2-, 5/3-, and 2x3/2-way valves. In accordance with DIN ISO 14159 standards, CDVI has no sharp edges and no small corners where dirt can accumulate. It permits closure of up to 3 air passages to provide different operating pressures. CDVI operates on compressed air at 44 to 87 psi, and at 145 psi if...
Read More »
Air Booster doubles pressure for pneumatic applications.
DPA air-to-air booster employs dual piston technology and has no oil or liquid to contaminate operating area. It accepts shop air and generates increase at output. Unit comes in 63 and 100 mm bore sizes and can be operated without air lubrication system, however filtered air supply (5 microns) is required. Input pressure is 2 to 8 bar and 2 to 10 bar, respectively. Size 63 mm will produce up to...
Read More »
Pneumatic Cylinder helps shorten clean-up process.
CDN combines smooth exterior surface with integral positioning sensors for easy clean-up in food processing and packaging applications. It comes with FDA approved lubricating grease and 300 series stainless steel piston rod for maximum corrosion protection. CDN conforms to ISO 6431 standard and comes in bore sizes from 32 to 100 mm with strokes from 10 to 500 mm.
Read More »
Valve Manifold supports DeviceNet interface.
Direct Link Compact Performance Valve Manifold provides for 8 valve positions and is available in 10, 14 and 18mm port sizes. Voltage range of 11 to 28 Vdc is supported. Manifold can be populated with single or double solenoid 5/2- or double solenoid 5/3-way, and dual 3/2-way (normally open) or dual 3/2-way (normally closed), or combination of dual configurations. Type 10 manifold meets IP 65...
Read More »
Miniature Valves meet IP 40 protection standards.
MH1 Miniature Valves feature 10mm grid design and are available for single sub-base, standard manifold, sub-D manifold, and PCB mounted manifold configurations. Series includes 10 lpm 3/2 direct-acting units, 3/2 normally open and normally closed, and 2/2 normally closed unit that provides 20 lpm flow for vacuum applications. Electrical connections include plug-in, horizontal or top connector....
Read More »
Pneumatic Actuator works like human muscle.
Type MAS Fluidic Muscle uses material deformation and flexure to achieve linear motion. Basic concept involves wrapping flexible hose with non-elastic fibers arranged in rhomboidal fashion. This results in 3D grid pattern. When compressed air is introduced into system, grid pattern is deformed, pulling force is generated in axial direction, and muscle shortens. Range includes 10, 20 and 40 mm...
Read More »Micro Controller offers distributed processing.
FEC-FC34, with 10Base-T connectivity and TCP/IP protocol, provides local and remote process communication. It operates on 24 Vdc and has 12 inputs (user configurable as PNP or NPN) and 8 outputs. Two inputs can be used as high speed counters. 16-bit 20 MHz processor allows for multi-tasking of up to 64 programs. When connected to network, process/control information is available for enterprise...
Read More »
Mini Slides provide precision in handling and assembly.
SLF low profile slides employ integral, parallel pneumatic actuator and double-row cage ball bearings. They are available with 6, 10 and 16mm bore sizes, and stroke range of 10 to 30mm, 10 to 50mm and 10 to 80mm, respectively. SLS slides can be installed in tight spaces, due to narrow design and centerline thrust configuration. Twin piston style SLT slides utilize inline, double-row ball bearings...
Read More »
Corrosion Resistant Actuators work in food processing.
CR Series actuators resist sulfur dioxide atmosphere, sodium chloride mist spray, and water condensation. Five models are available: CRDNG and CRDNGS conform to ISO 6431 and VDMA 24562 standards, have piston dia from 32 to 100mm and stroke lengths between 10 to 2000mm; CRDNG has integrated swivel flange for clevis mounting. CRDSNU and CRDSW are slim-line actuators with round-section barrel for...
Read More »