Advanced Motion Controls
Camarillo, CA 93012
Share:
EtherCAT-® Servo Drives use demultiplexed motion technology.
DZE and DZS series incorporate DxM (Demultiplexed Motion) technology, which handles all sub-node activity through one node and allows connection of up to 3 DZS drives (sub-nodes) to one DZE (node) on EtherCATÃ-® network for up to 4 axes of servo motion. Also available, DPE series EtherCAT-enabled servo drives are part of panel mount DigiFlexÃ-® Performance(TM) platform. DPEs and DZEs can...
Read More »
Digital Servo Drives feature PCB mount design.
Providing 10-80 Vdc operation while delivering 12 A continuous/20 A peak current, DZ Series can be configured to operate in torque, velocity, and position modes for brushed, voice coil, or brushless motors. Units deliver up to 1 kW continuous power when needed and can achieve up to 98% efficiency. Supporting CANopen and RS-232/485 up to ~1 Mbaud, drives accept variety of input commands including...
Read More »Digital Servo Drives feature isolated inputs and outputs.
Series DR101EE can be used in torque or velocity mode, and uses encoder feedback for commutation and servo loop closure. Inputs and outputs can be sinking or sourcing, and operate up to 30 Vdc. RS232/485 interface is fully isolated, providing serial communication in harsh environments. Drive configuration and tuning is accomplished via graphical and intuitive Windows based utility using RS232/485...
Read More »Servo Drive facilitates soft motion implementation.
Series DC201 digital drive allows users to implement multi-axis coordinated motion control system without need for dedicated motion controller. With built-in third-order interpolation and 5 kHz position loop, series has position set points sent from host via network. Able to be synchronized, drives are offered in encoder and resolver feedback models. Series include units with supply range of 80...
Read More »Digital Servo Drive has supply range of 20 Vdc to 460 Vac.
Series DRQ110EE is equipped with digital, 100Mbit/s SynqNet(TM) 100Base-T motion control network interface, which allows servo drive to be mounted in close vicinity of motor. Drive is suited for use with brushed or brushless, rotary or linear servomotors. Drive configuration and tuning are accomplished via graphical, Windows-based utility, using serial RS232/485 communication port. Maximum...
Read More »Servo Amplifier suits high duty cycle applications.
Model SX25A20 outputs 25 A peak, 12.5 A continuous and operates off 60-190 Vdc. It accepts 2 sinusoidal command signals with 120Ã-
Read More »Servo Amplfier suits stand alone velocity mode applications.
Model BX25A20AC brushless servo amplifier outputs 25 A peak and 12.5 A continuous. Dipswitches enable user to field configure unit for Hall, encoder, or tachometer velocity modes. They also allow adjustment of current scaling and configuration of active fault level, inhibit/enable, and latching/non-latching faults. Built-in power supply allows amplifier to run directly off 30-125 Vac. Unit...
Read More »Digital Drives include velocity operating mode.
DR100 Series digital servo drives can be used with rotary, linear, brush type, or brushless motors. Velocity loop is implemented as fully de-coupled PID algorithm, with addition of feed-forward gain, and runs at 100 Ã-µs update rate. Zero-speed and at-velocity are fully programmable and can be mapped to 1 of 4 programmable digital outputs. Models are available with supply range of 80 Vdc to...
Read More »Servo Drives and Amps fit any motor or application.
Servo amplifiers and drives are available in custom designs to drive brushless and brush-type linear and rotary motors and actuators. Each can be customized with connectors, number of axes, power range, feature set, functionality, diagnostics, packaging, and I/O. Supply voltages range from 20 to 400 Vdc. Output current capability is up to 120 A peak. Various commands and interfaces are available.
Read More »Digital Servo Drive accepts resolver feedback.
DR100RE Series is designed for use with brushless, rotary, or linear servomotors. Digital current loop is 20 kHz and uses Space Vector Modulation switching techniques. Encoder output emulation resolution is configurable for 12 or 14 bit resolution. Drive configuration and tuning is through Windows-based utility using serial RS232/485 communication port. Models are available with supply range of...
Read More »
EtherCAT-® Servo Drives use demultiplexed motion technology.
DZE and DZS series incorporate DxM (Demultiplexed Motion) technology, which handles all sub-node activity through one node and allows connection of up to 3 DZS drives (sub-nodes) to one DZE (node) on EtherCATÃ-® network for up to 4 axes of servo motion. Also available, DPE series EtherCAT-enabled servo drives are part of panel mount DigiFlexÃ-® Performance(TM) platform. DPEs and DZEs can...
Read More »
Digital Servo Drives feature PCB mount design.
Providing 10-80 Vdc operation while delivering 12 A continuous/20 A peak current, DZ Series can be configured to operate in torque, velocity, and position modes for brushed, voice coil, or brushless motors. Units deliver up to 1 kW continuous power when needed and can achieve up to 98% efficiency. Supporting CANopen and RS-232/485 up to ~1 Mbaud, drives accept variety of input commands including...
Read More »AMC shipped their 1 Millionth Servo Drive
ADVANCED Motion Controls (AMC) is pleased to announce a significant milestone in the company's history. On Wednesday, November 23rd, the 1,000,000th servo drive rolled off our production line. This is a major accomplishment considering the company was a two-person start-up 17Ã-½ years ago. To celebrate this achievement, the employees of the company built special commemorative units for the...
Read More »Digital Servo Drives feature isolated inputs and outputs.
Series DR101EE can be used in torque or velocity mode, and uses encoder feedback for commutation and servo loop closure. Inputs and outputs can be sinking or sourcing, and operate up to 30 Vdc. RS232/485 interface is fully isolated, providing serial communication in harsh environments. Drive configuration and tuning is accomplished via graphical and intuitive Windows based utility using RS232/485...
Read More »Servo Drive facilitates soft motion implementation.
Series DC201 digital drive allows users to implement multi-axis coordinated motion control system without need for dedicated motion controller. With built-in third-order interpolation and 5 kHz position loop, series has position set points sent from host via network. Able to be synchronized, drives are offered in encoder and resolver feedback models. Series include units with supply range of 80...
Read More »Digital Servo Drive has supply range of 20 Vdc to 460 Vac.
Series DRQ110EE is equipped with digital, 100Mbit/s SynqNet(TM) 100Base-T motion control network interface, which allows servo drive to be mounted in close vicinity of motor. Drive is suited for use with brushed or brushless, rotary or linear servomotors. Drive configuration and tuning are accomplished via graphical, Windows-based utility, using serial RS232/485 communication port. Maximum...
Read More »Servo Amplifier suits high duty cycle applications.
Model SX25A20 outputs 25 A peak, 12.5 A continuous and operates off 60-190 Vdc. It accepts 2 sinusoidal command signals with 120Ã-
Read More »Servo Amplfier suits stand alone velocity mode applications.
Model BX25A20AC brushless servo amplifier outputs 25 A peak and 12.5 A continuous. Dipswitches enable user to field configure unit for Hall, encoder, or tachometer velocity modes. They also allow adjustment of current scaling and configuration of active fault level, inhibit/enable, and latching/non-latching faults. Built-in power supply allows amplifier to run directly off 30-125 Vac. Unit...
Read More »Digital Drives include velocity operating mode.
DR100 Series digital servo drives can be used with rotary, linear, brush type, or brushless motors. Velocity loop is implemented as fully de-coupled PID algorithm, with addition of feed-forward gain, and runs at 100 Ã-µs update rate. Zero-speed and at-velocity are fully programmable and can be mapped to 1 of 4 programmable digital outputs. Models are available with supply range of 80 Vdc to...
Read More »Servo Drives and Amps fit any motor or application.
Servo amplifiers and drives are available in custom designs to drive brushless and brush-type linear and rotary motors and actuators. Each can be customized with connectors, number of axes, power range, feature set, functionality, diagnostics, packaging, and I/O. Supply voltages range from 20 to 400 Vdc. Output current capability is up to 120 A peak. Various commands and interfaces are available.
Read More »