Beckhoff Automation, LLC
Savage, MN 55378
Linear Servo Motors do not require liquid cooling.
Measuring 50 mm wide, AL2400 series includes 2 motors with peak force of 120 or 240 N. They have pole spacing of 24 mm, reach speeds up to 8 m/s, and are operated with 230 Vac. Offered in 4 models, AL2800 series produces peak forces up to 9,000 N, measure 130 mm wide, and are operated with 400-480 Vac. Pole spacing is 24 mm, and motors reach speeds from 2.5-6 m/s. Products are designed with...
Read More »
Pole-Wound Servomotors offer torques from 0.18-53 Nm.
Series AM3000 Synchronous Servomotors feature sealed windings and are available with 7 flange sizes. Housings, made from single piece of metal, produce no negative impact on stability through material transitions that increase thermal resistance. Rotatable plug connectors for power and feedback facilitate machine wiring. Pressed bearings prevent axial motion of shaft. Tight tolerances result in...
Read More »
Mini Industrial Computers handle PLC tasks.
Featuring Intel Celeron or Pentium III processor, Series C63xx control cabinet PCs have removable internal chassis and are fully operational when chassis is removed. All PC connections are located on one side, while 3 mounting sides offer installation variations. Pentium III unit can execute 1,000 lines of PLC code in less than 25 Ã-µs. For networking, units provide on-board Ethernet...
Read More »
Terminal Modules feature increased packing density.
KMxxxx Terminal Modules combine 16, 32, or 64 digital inputs or outputs in compact, slimline units, resulting in smaller control cabinets and terminal boxes. Compatible with all common fieldbuses, modules can be integrated into I/O system and connected with internal terminal bus. Bus Terminals with 1, 2, 4, or 8 channels are 12 mm wide and enable bit-precise configuration of required I/O channels.
Read More »
Ethernet Control Panels feature built-in intelligence.
Available with integrated, Intel Pentium-compatible, 266 MHz CPU, Series CP67xx and CP77xx use standard operating systems such as Windows CE and XP Embedded. They include 256 Mb RAM, 8 kb NOVRAM, IDE interface for Compact Flash, 2 Ethernet interfaces for 10/100 Mbps, and 2 USB master interfaces. Featuring anodized metal housings, panels are equipped with normal and PLC keys, touchscreen, and...
Read More »Controller is suited for low- to mid-range machines.
With IP20 rating, BX Controller enables users to program with one open software package, choose from 100+ different I/O signals, and stock one type of I/O for all machine types. Features include fieldbus port for Profibus, DeviceNet, Ethernet TCP/IP, CANopen, and RS232/RS485; RS232/RS485 port; and built-in SSB bus for peer to peer and HMI communications. Unit also has display with navigation...
Read More »Control Software eliminates need for identical PC hardware.
TwinCAT Backup allows transfer of all critical data from one PC controller to another. It runs as normal program in Windows and will automatically perform full and incremental data backups. Backup data can include TwinCAT data and program files, computer name, network settings, and other critical programs such as HMI or SCADA software.
Read More »
Ethernet I/O Module mounts on machine or plant floor.
Rated IP67, Ethernet Fieldbus box allows users to directly mount Ethernet I/O modules on machine or plant floor. Unit, totally protected against dust, also withstands being submersed under 1 m of water for 30 min. Functionality and capabilities are same as cabinet mount BK9000 and BC9000 Bus Terminal products, including capability of having Modbus TCP/IP, ADS, and Beckhoff Real-time Ethernet...
Read More »
Oscilloscope Terminals provide analog signal processing.
Models KL3361 and KL3362 process 16 mv and 10 V analog signals, respectively, and can replace separate analog cards and associated wiring harnesses. Analog input values are processed over 1 of 13 fieldbus networks including Ethernet, Profibus, and DeviceNet. Bus Terminals locally convert analog signal to digital signal at speeds configurable down to 10 Ã-µs. They store data in local 32 Kbyte...
Read More »
PC-Based Software offers CNC control.
TwinCAT CNC combines PC-based control software with multi-axis interpolated motion CNC control for complex applications with up to 32 axes across 10 channels. Equipped with Pentium 4, 2.4 GHz processor, product requires 260 Ã-µsec to handle one application with 5 interpolating axes and 1 spindle. Software enables integration of I/O sequencing as part of CNC program and provides required axis...
Read More »