Beckhoff Automation, LLC
Savage, MN 55378

Beckhoff to Reveal XTS, EtherCAT G and TwinCAT Vision at Pack Expo 2019 in Las Vegas
XTS combines the advantages of rotary and linear drive principles that provide paradigm-shifting capabilities for packaging machines and smart factories. TwinCAT Vision software adds comprehensive image processing into the range of machine control programming and runtime in TwinCAT 3. EtherCAT G and EtherCAT G10 provides communication at 1 and 10 Gbit/s, respectively, in conformance with the IEEE...
Read More »
New eXtended Transport System Can Reduce Machine Footprint up to 50%
Can be controlled with high dynamics up to 4 m/s on extremely customizable paths. Provides movers to accelerate, brake, position and synchronize themselves on the fly with automatic collision avoidance. Available with various options for 22.5-, 45- and 180-degree modules to enable circle, clothoid and S-curve designs and for open straight segments.
Read More »
Beckhoff Releases TwinCAT Scope Software That Provides Support Integrated Data Acquisition Across Heterogeneous System Environments
Consists of Scope View for the graphical display of signal curves and Scope Server for the actual data logging. Scope server features TwinCAT-specific ADS channel that provides standardized communication channel in OPC UA client form. TwinCAT Target Browser used for managing connected data sources in engineering.
Read More »
New AMP8620 Supply Module Features Two EtherCAT P Outputs
Includes circuitry such as mains filters, rectifiers and charging circuits for integrated DC link capacitors. DC link capacitors store regenerative energy of system and make it available again for acceleration processes. 24 V power supply unit ensures that logic power supply does not exceed permissible level.
Read More »
New C6032 Industrial PC Offers Storage Capacity of 40 GB M.2 SSD, 3D Flash
Equipped with powerful Intel® Core™ i processors of the 6th and 7th generation. Features 2 x Gbit Ethernet, 2 x USB 3.0, 2 x RS232 and 1 x CP-Link 4. Suitable for an operating temperature range of up to 55°C.
Read More »
TwinCAT 3 Machine Learning Software Provide Machine Builders and Manufacturers with an Optimum Foundation to Improve Machine Performance
ML models can be trained and used to deliver high-performing solutions. Supports real-time ML, allowing it to handle demanding tasks like motion control. Offers seamlessly integrated, open and real-time solution for control systems.
Read More »
New EtherCAT and CX7000 Embedded Controller with Single-core, 400 MHz ARM Cortex-M7 Processor
DIN rail-mountable controller maintains minimum footprint with dimensions of 49 x 100 x 72 mm. Eight 24 V digital inputs and four outputs built into the device and able to leverage feature-filled TwinCAT 3 automation software. Extends the range of Beckhoff controllers to include both ultra-compact controllers that can act as distributed control devices on EtherCAT network.
Read More »
Beckhoff Releases ELM314x Family Measurement Modules for Vibration Measurement Applications on Fast-Running Machines
The ELM314x Family Measurement Modules are available in two, four, six and eight-channel versions with an accuracy of 100 ppm. The unit can be operated in 10 to 40°C temperature range and allows user to set current or voltage measurements with a sampling rate of up to 1 ksps per channel. The modules accept analog signals in ±1.25 to ±10 V, 0 to 10 V, ±20 mA or 0/4 to 20 mA ranges. They come...
Read More »
Beckhoff Introduces the New CX7000 with Increased Convenience and Efficiency
Beckhoff has revealed the new CX7000 embedded PC that enhances the scalability of PC-based control technology. It is equipped with an ARM Cortex-M7 processor with higher processing power available in the low-cost, compact controller segment. CX7000 has an extremely compact design is best used for small controller applications that typically require minimum footprint with 4 digital inputs...
Read More »
New Safety Controllers Feature Adaptability to Varied Safety System Requirements
The TwinSAFE safety controllers have the ability to distribute safety applications across TwinSAFE Logic-capable I/O modules. The new I/O modules feature direct communication with other safety-relevant devices and customizable functions.
Read More »