Beckhoff Automation, LLC

Embedded PC can be used as EtherCAT master.
Computer Hardware & Peripherals

Embedded PC can be used as EtherCAT master.

Featuring direct connection for EtherCAT I/O terminals, CX1020 provides industrial PC performance at modular I/O level as compact controller mounted on DIN rail. It features 600 MHz Intel Celeron M CPU and uses Compact Flash as its boot and memory medium. When EtherCAT is used as fieldbus, product can achieve response times of less than 1 msec. PC controls up to 256 axes and can program up to 4...

Read More »
I/O Modules provide drive-like stepper motor control.
Controls & Controllers

I/O Modules provide drive-like stepper motor control.

Bus terminals KL2531 and KL2541 integrate compact motion control solution for stepper motors up to 200 W, eliminating need for remote amplifiers. Measuring 12 mm, KL2531 has peak current of 1.5 A per phase and is designed for integration into 24 Vdc control voltage system. With peak current of 5 A, 24 mm wide KL2541 can generate 5 Nm torque and features integrated incremental encoder interface....

Read More »
Industrial PCs offer 3 free PCI slots.
Computer Hardware & Peripherals

Industrial PCs offer 3 free PCI slots.

In addition to motherboard slot for Intel Celeron or Pentium III processors, Models C6340 and C6350 include 3 PCI slots on 5-slot passive backplane for extra PC fieldbus cards. External dimensions of Model C6340 are 134 x 196 x 226 mm without mounting plate, and Model C6350, with CD-RW drive, adds 14 mm to width. All PC connections are uniformly located at front, while mountings on sides offer...

Read More »
Analog Input Terminal suits precision control processes.
Architectural & Civil Engineering Products

Analog Input Terminal suits precision control processes.

KL3356 bus terminal provides direct connection for resistor bridges, strain gauge sensors, and common analog input signals. Unit has min measurement error of ±0.01% FS, and complete circuit calibrates itself at least once every 3 min. Signals are digitized with resolution of 16 bits and precision of 15 bits. Bus terminals combine 2 channels in one housing, and input channels of bus terminal...

Read More »
Linear Servo Motors do not require liquid cooling.
Electrical Equipment & Systems

Linear Servo Motors do not require liquid cooling.

Measuring 50 mm wide, AL2400 series includes 2 motors with peak force of 120 or 240 N. They have pole spacing of 24 mm, reach speeds up to 8 m/s, and are operated with 230 Vac. Offered in 4 models, AL2800 series produces peak forces up to 9,000 N, measure 130 mm wide, and are operated with 400-480 Vac. Pole spacing is 24 mm, and motors reach speeds from 2.5-6 m/s. Products are designed with...

Read More »
Pole-Wound Servomotors offer torques from 0.18-53 Nm.
Electrical Equipment & Systems

Pole-Wound Servomotors offer torques from 0.18-53 Nm.

Series AM3000 Synchronous Servomotors feature sealed windings and are available with 7 flange sizes. Housings, made from single piece of metal, produce no negative impact on stability through material transitions that increase thermal resistance. Rotatable plug connectors for power and feedback facilitate machine wiring. Pressed bearings prevent axial motion of shaft. Tight tolerances result in...

Read More »
Mini Industrial Computers handle PLC tasks.
Computer Hardware & Peripherals

Mini Industrial Computers handle PLC tasks.

Featuring Intel Celeron or Pentium III processor, Series C63xx control cabinet PCs have removable internal chassis and are fully operational when chassis is removed. All PC connections are located on one side, while 3 mounting sides offer installation variations. Pentium III unit can execute 1,000 lines of PLC code in less than 25 Â-µs. For networking, units provide on-board Ethernet...

Read More »
Terminal Modules feature increased packing density.
Controls & Controllers

Terminal Modules feature increased packing density.

KMxxxx Terminal Modules combine 16, 32, or 64 digital inputs or outputs in compact, slimline units, resulting in smaller control cabinets and terminal boxes. Compatible with all common fieldbuses, modules can be integrated into I/O system and connected with internal terminal bus. Bus Terminals with 1, 2, 4, or 8 channels are 12 mm wide and enable bit-precise configuration of required I/O channels.

Read More »
Ethernet Control Panels feature built-in intelligence.

Ethernet Control Panels feature built-in intelligence.

Available with integrated, Intel Pentium-compatible, 266 MHz CPU, Series CP67xx and CP77xx use standard operating systems such as Windows CE and XP Embedded. They include 256 Mb RAM, 8 kb NOVRAM, IDE interface for Compact Flash, 2 Ethernet interfaces for 10/100 Mbps, and 2 USB master interfaces. Featuring anodized metal housings, panels are equipped with normal and PLC keys, touchscreen, and...

Read More »

Controller is suited for low- to mid-range machines.

With IP20 rating, BX Controller enables users to program with one open software package, choose from 100+ different I/O signals, and stock one type of I/O for all machine types. Features include fieldbus port for Profibus, DeviceNet, Ethernet TCP/IP, CANopen, and RS232/RS485; RS232/RS485 port; and built-in SSB bus for peer to peer and HMI communications. Unit also has display with navigation...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers