Beckhoff Automation, LLC

I/O Terminals use eXtreme Fast Control(TM) technologies.
Controls & Controllers

I/O Terminals use eXtreme Fast Control(TM) technologies.

EtherCAT® I/O terminals with time stamping latch exact system time at which edge changes occur; digital value output can occur at predefined times. Terminals with oversampling enable actual value acquisition or set value output with higher time resolution than communication cycle time. Distributed clocks with less than 1 Â-µsec jitter and 1 µsec resolution are used for time...

Read More »
Agricultural & Farming Products

Small PLCs are designed for Ethernet TCP/IP control.

Featuring direct connection to Beckhoff I/O terminals, models BC9120, BC9020, and BC9050 can be operated as stand-alone PLCs or decentralized intelligence in Ethernet network. Each has implemented Modbus TCP, ADS/TCP, ADS/UDP, BootP, DHCP, SNTP, and SMTP protocols. While BC9050 extends Beckhoff Bus Terminal system in space-saving housing, BC9020 and BC9120 offer additional program and data...

Read More »
Agricultural & Farming Products

Bus Terminal controls speed of single-phase AC motor.

Suitable for drives with quadratic load characteristics such as fans and pumps, Model KL2791 Bus Terminal I/O system enables direct connection of small, 1 A, single-phase motors rated 120 V, 60 Hz, in order to achieve setting range for flow rate from 10-100%. Set value for motor speed is specified by 16-bit value, and motor is switched on and off with mains synchronous pattern. Compact speed...

Read More »
Embedded PC meets automation and control requirements.
Computer Hardware & Peripherals

Embedded PC meets automation and control requirements.

Equipped with 1.8 GHz Intel® Pentium® M processor, DIN rail mounted Model CX1030 contains 256 Mb DDR RAM, which is expandable to 512 Mb or 1 Gb. CPU is cooled by passive cooling module and exchangeable fan cartridge located on underside of housing. Operating without use of hard drive, PC boots from Compact Flash. Basic configuration includes removable 64 Mb CF card, 2 Ethernet RJ45...

Read More »
Architectural & Civil Engineering Products

Ethernet Control Panel has 5.7 in. display.

Featuring integrated PC with Intel® IXP420 processor and Windows CE operating system, Model CP6608 Ethernet Control Panel comes equipped with 2 Ethernet ports with 10/100BASE-T, 2 USB 2.0 ports, and 1 serial RS232 port as external interfaces. It features 32 MB of flash memory and 128 MB of RAM. Rugged, compact, cabinet-mounted CP6608 has aluminum front and offers IP65 protection at front...

Read More »
Computer Hardware & Peripherals

Beckhoff Automation Helps Introduce Microsoft Windows Embedded CE 6.0 R2

Automatic device detection using leading edge Microsoft and Beckhoff technologies MINNEAPOLIS, November 20, 2007 - Microsoft announced the newest version of the CE operating system, Windows Embedded CE 6.0 R2, on November, 15 2007 in Yokohama, Japan. One of the new highlights of Windows Embedded CE 6.0 R2 is Web Services on Devices" (WSD). As a Windows Embedded Gold Partner, Beckhoff Automation...

Read More »
Computer Hardware & Peripherals

Embedded PC suits automation and control applications.

Model CX1010 Embedded PC is modular, DIN rail-mounted industrial PC with 500 MHz Pentium® MMX-compatible processor. Mid-range, EtherCAT-ready system features built-in Ethernet connectivity and PC/104 interface, which is available on both sides of device. Core CPU module, at 57 mm wide, offers 256 MB of internal RAM and 64 MB Compact Flash Card, and is available with Windows CE or Windows XP...

Read More »
Electrical Equipment & Systems

Servo Motors eliminate need for gearboxes.

Available with flange sizes from 3-6, AM3500 Series provides 1.9-15 Nm torque and speeds from 3,000-6,000 rpm. Units are suited for machine tool axes with stringent synchronism requirements and can eliminate gearbox in high inertia applications such as rotary tables. Rated IP64, motors are available with resolvers or absolute encoders as feedback system. Motor series is CE-, UL- and CSA-listed.

Read More »
Computer Hardware & Peripherals

Embedded PC comes with Windows CE OS.

Equipped with TwinCAT automation and control software, Model CX9010 features Intel® IXP420 processor with XScale® technology and 533 MHz clock frequency. It has main memory (RAM), NOVRAM, and one switched Ethernet port with 2 external RJ45 interfaces. Additional DVI/USB or serial RS232/RS422/RS485 interfaces are available. Solid state device includes internal flash memory as boot and...

Read More »
Coupler acts as gateway between I/O terminals.
Controls & Controllers

Coupler acts as gateway between I/O terminals.

Acting as bridge between company's original Bus Terminal I/O line and high-speed EtherCAT Terminals, Model BK1250 converts EtherCAT's E-bus signal so data can be passed over original I/O terminals, all on same node. EtherCAT protocol can process 1,000 distributed I/O in 30 Â-µs or 100 axes in 100 µs using twisted pair or fiber optic cable.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers