H2W Technologies
Santa Clarita, CA 91350
New Single-Axis Linear Stepper Stages Operate Linear Stepper Motor as a 2-Phase Brushless Linear Motor
Offers Linear stepper motor with the force of 11.0 lbs [48.8 N] and a total stroke length of 31.0 in [788mm]. Requires 60-80 PSI of filtered compressed air for proper operation of the stage. Forcer and stage equipped with high flex power cable and cable carrier for protection against fatigue and failure.
Read More »
New Single-axis Linear Stepper Stages Features 1.0-micron Resolution Encoder
STS-1220-AP3 powers the stage and generates force of 11.0 lbs with 31.0 in stroke length. Can operate as a 2-phase brushless linear motor when coupled with a state-of-the-art motion control. Working at high speed lead to cable fatigue and failure.
Read More »
4-Axis Gantry
When an application requires fast motion with a stroke over a couple of inches, a brushless linear motor stage will meet the needs of long travel and fast motion when coupled with a motion control system with servo amplifiers and a motion controller. The brushless linear motor stages can be coupled as a gantry for pick and place manufacturing or inspection equipment. The fast motion allows for a...
Read More »
Low Profile XY Brushless Linear Motor Positioning Stage
Santa Clarita, CA -- The SRS-004-006/004-003-01-XY is a low profile XY single rail positioning stage that uses brushless linear motors to generate a continuous/peak force of 6.2 lbs [27.8 N]/18.7 lbs [83.3 N] (bottom axis), 3.1 lbs [13.8 N]/9.4 lbs [41.8 N] (top axis), with a total stroke length of 4.3 in [109 mm] (bottom axis), 4.3 in [109 mm] (top axis). The top axis is able to directly mount...
Read More »
New Voice Coil Positioning Stage with1.0-Micron Resolution Encoder
Features dual feedback low profile and high force. 200 lbs force transducer allows for 1-200 lbs of push/pull force feedback. Offered with a rigid recirculating ball linear bearing.
Read More »
New Single Rail Positioning Stage Assembled on Single Piece of Aluminum Extrusion
SRS-006-06-050-01-EX features single extrusion lengths up to 6 m long allowing for long strokes. Ability to run multiple independently controlled motor heads on a single magnet track. Custom strokes, forces and feedback resolution configurations available.
Read More »
New Positioning Stage Comes with Non-Contact 1 Micron Resolution Encoder
Uses brushless linear motor to generate continuous/peak force of 50 lbs [220 N]/150 lbs [660 N]. Able to run multiple independently controlled motor heads on a single magnet track. Ideal for high-speed closed loop positioning applications that require both short and long travel distances.
Read More »
New Linear Stepper Motors Provides Low Profile and Small Cross Section
Performs at speeds of up to 80 in/sec and strokes of up to 68 in. Capable of very precise position, velocity and acceleration control when coupled with a micro-stepping drive and indexer. Ideal for high-speed open loop positioning applications.
Read More »
New DC Linear Brush-type Servo Amplifiers for Low Noise Operation
LCAM 5/15 allows the current to flow continuously to the motor which prevents any dead-band issues that occur in many PWM type amplifiers. Available with wide power supply range of +24 to +70 volts DC. Ideally suited to drive complete line of voice coil linear actuators.
Read More »
New Linear Stepper Motors for High-speed Open Loop Positioning Applications
Performs at speeds of up to 80 in/sec and strokes of up to 68 in. Capable of precise position, velocity and acceleration control when coupled with a micro-stepping drive and indexer. Provides multiple forcers on a single platen and no servo tuning is required.
Read More »
New Single-Axis Linear Stepper Stages Operate Linear Stepper Motor as a 2-Phase Brushless Linear Motor
Offers Linear stepper motor with the force of 11.0 lbs [48.8 N] and a total stroke length of 31.0 in [788mm]. Requires 60-80 PSI of filtered compressed air for proper operation of the stage. Forcer and stage equipped with high flex power cable and cable carrier for protection against fatigue and failure.
Read More »
New Single-axis Linear Stepper Stages Features 1.0-micron Resolution Encoder
STS-1220-AP3 powers the stage and generates force of 11.0 lbs with 31.0 in stroke length. Can operate as a 2-phase brushless linear motor when coupled with a state-of-the-art motion control. Working at high speed lead to cable fatigue and failure.
Read More »
4-Axis Gantry
When an application requires fast motion with a stroke over a couple of inches, a brushless linear motor stage will meet the needs of long travel and fast motion when coupled with a motion control system with servo amplifiers and a motion controller. The brushless linear motor stages can be coupled as a gantry for pick and place manufacturing or inspection equipment. The fast motion allows for a...
Read More »
Low Profile XY Brushless Linear Motor Positioning Stage
Santa Clarita, CA -- The SRS-004-006/004-003-01-XY is a low profile XY single rail positioning stage that uses brushless linear motors to generate a continuous/peak force of 6.2 lbs [27.8 N]/18.7 lbs [83.3 N] (bottom axis), 3.1 lbs [13.8 N]/9.4 lbs [41.8 N] (top axis), with a total stroke length of 4.3 in [109 mm] (bottom axis), 4.3 in [109 mm] (top axis). The top axis is able to directly mount...
Read More »
New Voice Coil Positioning Stage with1.0-Micron Resolution Encoder
Features dual feedback low profile and high force. 200 lbs force transducer allows for 1-200 lbs of push/pull force feedback. Offered with a rigid recirculating ball linear bearing.
Read More »
New Single Rail Positioning Stage Assembled on Single Piece of Aluminum Extrusion
SRS-006-06-050-01-EX features single extrusion lengths up to 6 m long allowing for long strokes. Ability to run multiple independently controlled motor heads on a single magnet track. Custom strokes, forces and feedback resolution configurations available.
Read More »
New Positioning Stage Comes with Non-Contact 1 Micron Resolution Encoder
Uses brushless linear motor to generate continuous/peak force of 50 lbs [220 N]/150 lbs [660 N]. Able to run multiple independently controlled motor heads on a single magnet track. Ideal for high-speed closed loop positioning applications that require both short and long travel distances.
Read More »
New Linear Stepper Motors Provides Low Profile and Small Cross Section
Performs at speeds of up to 80 in/sec and strokes of up to 68 in. Capable of very precise position, velocity and acceleration control when coupled with a micro-stepping drive and indexer. Ideal for high-speed open loop positioning applications.
Read More »
New DC Linear Brush-type Servo Amplifiers for Low Noise Operation
LCAM 5/15 allows the current to flow continuously to the motor which prevents any dead-band issues that occur in many PWM type amplifiers. Available with wide power supply range of +24 to +70 volts DC. Ideally suited to drive complete line of voice coil linear actuators.
Read More »
New Linear Stepper Motors for High-speed Open Loop Positioning Applications
Performs at speeds of up to 80 in/sec and strokes of up to 68 in. Capable of precise position, velocity and acceleration control when coupled with a micro-stepping drive and indexer. Provides multiple forcers on a single platen and no servo tuning is required.
Read More »