H2W Technologies
Santa Clarita, CA 91350
New axis X-Theta Positioning System is Guided by Linear Ball Bearings
Includes rotary DC servo motor with encoder mounted to moving brushless linear motor driven positioning stage. Uses brushless linear motor BLDM-C08 to generate continuous force of 26 lb [115.5 N] and peak force of 78 lb [347 N] with a stroke length of 30 in. [768 mm]. Features combined linear and rotary displacement that is capable of full 360-degree rotation and is ideal for precision motion...
Read More »New XY-Theta Positioning Stage Minimizes The Amount of Pitch, Yaw and Roll in The System
The voice coil stage is a closed loop positioning system that can be used for positioning applications that require a limited rotation theta stage integrated. Features low-profile, three-axis motion control, high acceleration and compact footprint. Ideal for applications that require quick, short moves with fast settling times.
Read More »
New DRS-206-05-012-01-EX Positioning Stage Assembled on Single Piece of Aluminum Extrusion
Uses cog-free brushless linear motor to generate continuous force of 12.4 lbs and peak force of 37.4 lbs with a total stroke length of 210 in. Features low-profile, high speed, fast lead times and high acceleration. Ideal for applications that require long travel distances.
Read More »
New Positioning Stage Available with Sliding Contact Bearing System
VMS06-008-LB-01 features high acceleration and compact footprint. Available with 0.60" stroke, generates 1.12 lbs of continuous force and 3.36 lbs of peak force. Ideal for applications that require quick, short moves with fast settling times.
Read More »
New Voice Coil Actuator Features a Thru Hole in Magnet and Coil Assemblies
Features stroke of 1.4 in [35.6 mm] and motor constant of 6.9 lbs/sqrt(watt). Dimensions are 7.87 in of diameter and 3.50 in of retracted length. Can generate continuous force of 92 pounds and peak force of 294 pounds at a duty cycle of 10%.
Read More »
H2W Technologies Offers VCS06-010-BS-01-MXY Positioning System with Electromagnetic Circuit Design
Equipped with two-axis planar coil assembly, which interact with common magnetic circuit. Features a stroke, continuous force and peak force of 15.8 mm, 3.3 N and 10 N respectively. Allows a minimum overall height of 53 mm and offered with one-micron resolution magnetic linear encoder.
Read More »
H2W Engineers Introduces BLSM-1F Linear Motors That Offer a Force to Moving Ratio of 15:8
The BLSM-1F Brushless Linear Motors can be used at speeds up to 6 m/sec and comes in 170 mm x 190 mm x 38 mm size. The product can generate 300 lbs 10% duty cycle and 100 lbs at 100% duty cycle and is encapsulated using 350°F thermally conductive potting compound. They are suitable for applications such as conveying systems, baggage handling, laser and water jet cutting. These motors when...
Read More »
H2W Presents New Voice Coil Positioning Stage with High Flux Density Neodymium Magnets
The VCS13-108-LB-01-MCF Voice Coil Positioning Stage is equipped with a NCC13-30-108-1SH motor that delivers a continuous and peak force of 48.0 N and 144 N respectively. The stage is offered with recirculating ball linear bearing and a load cell with a signal conditioner that offers push/pull force feedback of 1-100 N. It is suitable for applications such as vision inspection, position control,...
Read More »
New Linear Stepper Positioning Stage Can Operate as a 2-Phase Brushless Linear Motor
H2W Technologies has released a new series of low profile linear stepper positioning stages. The stagees feature an absolute linear encoder that enable it to operate as a 2-phase brushless linear motor, improving the speeds, accelerations, and accuracy provided by standard stages.The stage uses H2W linear stepper motors o generate a force of 6.0 lbs with a total stroke length of 16 inches. It is...
Read More »
New NCM01-04-001-2IBH Voice Coil Actuator Features a Stroke of 2.5 mm
H2W’s NCM01-04-001-2IBH Voice Coil Actuator is suitable for controlled sinusoidal motion applications (1 to 1000 Hz for open loop applications and 1 to 125 Hz for closed loop applications). It features a precision ground 0.125 in. diameter shaft and a high cycle low-wear plastic bushings. It generates 0.5 N and 1.3 N of continuous force and peak force. The actuator can be operated as closed...
Read More »