HBcontrols, Inc.
Bldg. #2
Hyannis, MA 02601
Heater Control Banks operate multiple heating zones.
HBC-EZ series features pre-installed controller wiring harness for single-phase, 3-phase/2-pole, or 3-phase/3-pole applications. Relays offer zero cross-switching, max output of 6 A/pole at 40Ã-
Read More »Linear Phase Controller accepts variety of inputs.
DIN rail-mounted Controller Assembly accepts control inputs of 0-135 ohms, 4-20 mA, 0-5 Vdc, 0-10 Vdc, and potentiometer control. PWM inputs are also accepted. Unit consists of phase controller, solid-state relay, and heat sink, sized for application. Load currents range from 0.04-100 Aac, with load voltages up to 660 Vac. Features include line-voltage compensation, soft start, transient...
Read More »Current Transducers mount to stripped-wire relays.
Series HBC-138A ac-to-dc transducers sense ac line currents from 5-100 A and produce proportional output voltage of 0-10 Vdc. Inputs can produce signal to analog or digital meter, or can be used by PC or PLC to provide closed-loop control. Factory-set models provide output voltage of 10 Vdc at full scale, while some models provide output voltages that are adjustable using onboard multi-turn...
Read More »Relay Assemblies interface with various control input signals.
Intelligent Control Solid State Relay Assemblies are rated for loads up to 100 A at 40Ã-
Read More »Semiconductor Assemblies can be panel or DIN-rail mounted.
Power Semiconductor Assemblies, suited for applications requiring up to 400 A, combine Power Semiconductors with heat sinks and other components to provide pre-engineered solutions specifically designed to work within predetermined ambient operating environments. Resulting assemblies are offered with transistors, including MOSFET and IGBT; thyristors, including triacs; and diodes. Assemblies are...
Read More »Microcontrollers maintain water temperature.
Microcontrollers, for use in instant hot water heaters for home, hotel, or industrial use, can be wired to circuit card in space-saving, wall-mounted heating unit programmed to maintain temperature within Ã-
Read More »Relay Module provides multiple-zone control.
Relay Control Module consists of 12 solid state relays (SSR) capable of switching up to 1,200 W each. Each SSR can control 240 Vac at 5 A at ambient temperature up to 30Ã-
Read More »Power Control Relay provides proportional output.
SCR relay is suitable for heating control applications in laboratories and plastics, food processing, and semiconductor industries. Relay operates from 24 Vac isolated power supply, accepts 4-20 mA or 0-10 Vdc input, and provides proportional output up to 100 A at 40Ã-
Read More »Relay Monitor indicates alarm conditions.
Solid State Relay Monitor signals loss of ac or dc line current, open load, short circuit, and loss of dc power. It fits between connection terminals and finger-safe cover of standard solid state relay. Monitor shows green LED to indicate normal operation and normally closed dry relay contact opens on alarm. Four models are available to handle voltages ranging from 100-660 Vac, while four others...
Read More »Relay Assemblies are rated for 60 A loads.
Solid State Relay Assemblies feature anodized aluminum heat sink to ensure reliability at rated power levels in ambient operating environment up to 40Ã-
Read More »Heater Control Banks operate multiple heating zones.
HBC-EZ series features pre-installed controller wiring harness for single-phase, 3-phase/2-pole, or 3-phase/3-pole applications. Relays offer zero cross-switching, max output of 6 A/pole at 40Ã-
Read More »Linear Phase Controller accepts variety of inputs.
DIN rail-mounted Controller Assembly accepts control inputs of 0-135 ohms, 4-20 mA, 0-5 Vdc, 0-10 Vdc, and potentiometer control. PWM inputs are also accepted. Unit consists of phase controller, solid-state relay, and heat sink, sized for application. Load currents range from 0.04-100 Aac, with load voltages up to 660 Vac. Features include line-voltage compensation, soft start, transient...
Read More »Current Transducers mount to stripped-wire relays.
Series HBC-138A ac-to-dc transducers sense ac line currents from 5-100 A and produce proportional output voltage of 0-10 Vdc. Inputs can produce signal to analog or digital meter, or can be used by PC or PLC to provide closed-loop control. Factory-set models provide output voltage of 10 Vdc at full scale, while some models provide output voltages that are adjustable using onboard multi-turn...
Read More »Relay Assemblies interface with various control input signals.
Intelligent Control Solid State Relay Assemblies are rated for loads up to 100 A at 40Ã-
Read More »Semiconductor Assemblies can be panel or DIN-rail mounted.
Power Semiconductor Assemblies, suited for applications requiring up to 400 A, combine Power Semiconductors with heat sinks and other components to provide pre-engineered solutions specifically designed to work within predetermined ambient operating environments. Resulting assemblies are offered with transistors, including MOSFET and IGBT; thyristors, including triacs; and diodes. Assemblies are...
Read More »Microcontrollers maintain water temperature.
Microcontrollers, for use in instant hot water heaters for home, hotel, or industrial use, can be wired to circuit card in space-saving, wall-mounted heating unit programmed to maintain temperature within Ã-
Read More »Relay Module provides multiple-zone control.
Relay Control Module consists of 12 solid state relays (SSR) capable of switching up to 1,200 W each. Each SSR can control 240 Vac at 5 A at ambient temperature up to 30Ã-
Read More »Power Control Relay provides proportional output.
SCR relay is suitable for heating control applications in laboratories and plastics, food processing, and semiconductor industries. Relay operates from 24 Vac isolated power supply, accepts 4-20 mA or 0-10 Vdc input, and provides proportional output up to 100 A at 40Ã-
Read More »Relay Monitor indicates alarm conditions.
Solid State Relay Monitor signals loss of ac or dc line current, open load, short circuit, and loss of dc power. It fits between connection terminals and finger-safe cover of standard solid state relay. Monitor shows green LED to indicate normal operation and normally closed dry relay contact opens on alarm. Four models are available to handle voltages ranging from 100-660 Vac, while four others...
Read More »Relay Assemblies are rated for 60 A loads.
Solid State Relay Assemblies feature anodized aluminum heat sink to ensure reliability at rated power levels in ambient operating environment up to 40Ã-
Read More »