STMicroelectronics
Suite 300
Burlington, MA 01803
Share:
Operational Amplifier offers 200 mA output at 2.7 V supply.
Dual Op Amp, Model TS982 operates at supply voltages ranging from 2.5-5.5 V, offers rail-to-rail input and output, and is stable with unity gain. SO-8 exposed-pad package enables high current output at high ambient temperatures. Amplifier is suited for industrial and automotive applications including Hall sensor compensation coils, servo amplifiers, and motor drivers.
Read More »
Integrated Circuit suits free-to-view TV set-top boxes.
Available in 27 x 27 mm PBGA package, DTTi5516 combines MPEG decoder and terrestrial demodulator in one package. It is suited for free-to-air terrestrial set-top boxes (STBs) as well as STBs using DVB-MHP (DVB-Multimedia Home Platform). Single-chip solution allows TV viewers to watch digital terrestrial TV (DTT) channels on analog TV. Pin-out of device ensures that 2-layer printed circuit layout...
Read More »
Decoder/Demodulator decompresses digital broadcast signal.
Suited for digital cable set-top boxes, single-chip Model QAMi5516 allows viewers to watch digital cable TV channels on analog TV by performing functions of QAM cable-signal demodulator and MPEG video-stream decoder. Pin-out of device ensures that 2-layer printed circuit layout is possible despite functional complexity of set-top box.
Read More »
Transmitter converts TTL signals to LVDS channels.
Model STLVDS385B converts 24 bits of video data into 4 LVDS channels to drive flat-panel display. Phase-locked transmit clock is transmitted in parallel with data streams over 5th LVDS link. At transmit clock frequency of 85 MHz, each LVDS channel transmits data to display at 595 Mbit/s. Offering on-chip input-jitter filtering and high noise rejection, transmitter supports flat panel displays...
Read More »Interface Chip suits set-top boxes and IC card readers.
Model ST8004, for asynchronous 3 and 5 V smart cards, meets ISO 7816-3 standard and is compatible with NDS conditional access system. Analog chip has 3 protected, half-duplex, bi-directional buffered I/O lines and performs all supply protection and control functions when placed between smart card and microcontroller. Interface includes supply supervisor to control transients, ESD protection on...
Read More »Op Amps offer video amplification and switching.
Available in SOT23/5L, TSSOP8, and SO-8 packages, TSH8x series op amps offer negative input rail combined with rail-to-rail output stage. Models TSH80, TSH81, and TSH82 are single, single with stand-by, and dual-voltage feedback op amps, respectively. Each features gain/bandwidth product of 100 MHz, slew rate of 100 V/Ã-µsec, and output stage optimized for driving 150 ohm load. Total harmonic...
Read More »Tri-Axial Accelerometer has serial digital output.
Operating on 2.7-3.6 V, LIS3L02D includes single MEMS sensor chip and calibrated interface chip that senses changes in capacitance in sensor and translates them into SPI or I2C serial digital outputs. It has equivalent noise acceleration of better than 500 millionths of 1 g. Unit is suited for use in handheld terminals to implement motion-based user interfaces, allowing one-handed operation...
Read More »Transceiver Modules cut RF component count in mobile phones.
Triple-Band GSM/GPRS Transceiver Modules combine Silicon-Germanium radio frequency BiCMOS and Integrated Passive and Active Device technologies to simplify terminal design. Model STw3100 addresses European bands, while Model STw3101 targets US GSM850, DCS1800, and PCS1900 bands. Housed in 1.4 x 7 x 7 mm BGA package, modules integrate all key functions, requiring only 26 MHz crystal and power...
Read More »Microcontrollers include 10-bit ADC and 5 timers.
Series ST7MC consists of 8-bit microcontrollers for control of 3-phase induction and permanent magnet brushless motors. Devices feature MTC on-chip motor control peripheral consisting of 3-phase PWM multiplexed on 6 high-sink outputs, with Back EMF zero-crossing detector, and co-processor unit. Input pins can be configured for Hall, tachometer, or encoder sensing. Filters and settings allow...
Read More »
Audio Power Amplifier targets multi-channel applications.
Single-chip Model STA5150 delivers 200 W into 4 ohm load with less than 10% distortion. It combines Indigo's BASH topology and Bipolar-CMOS-DMOS process technology. BASH technology uses DMOS power transistors operated in class AB mode, reducing EMI and distortion typical of class D switching amplifiers. By continually adjusting power supply voltage, depending on amplitude of amplified audio...
Read More »