STMicroelectronics
Suite 300
Burlington, MA 01803
Share:
In-Circuit Emulator performs debugging and programming.
Modular ST7MDT25-DVP3 provides start-to-finish development support, including real-time emulation, debugging, and in-circuit programming, for automotive and industrial applications based on ST72561 microcontroller family. Design is based on common main emulation board that provides communication and interface capabilities coupled with target emulation board dedicated to single family of ST7...
Read More »Set-Top Box Chip provides MPEG decoder for SD TV.
Built using 0.13 micron technology, STM5105 offers unified, single-device platform for various set-top boxes in worldwide Free-to-Air satellite, cable, and terrestrial services. It integrates common functional blocks, such as audio DACs and VCXO, and supports all features of STi5518. Decoder has integrated 2D graphics engine, supported by blitter-based display; DVB descramblers, DVB-CI, and...
Read More »Microcontroller features embedded programmable logic.
Fabricated using 130 nm CMOS technology, GreenFIELD STW21000 combines ARM926EJ-S MIPS RISC processor core, 16-Mbit on-chip eDRAM memory, eFPGA block, and range of analog and digital peripherals. Unit is available with on-chip multiple HDLC controllers, 10/100 Ethernet MACs, multi-channel serial port, and Power-On-Reset function. It is suited for feedforward and digital pre-distortion ratio...
Read More »Vertical Deflection Booster suits slim CRT displays.
Model STV8179F drives vertical coil of deflection yoke to scan electron beam over screen. This, in conjunction with horizontal deflection and beam modulation, creates viewable images. Unit provides peak-to-peak current up to 3.6 A in operating mode, and sustains high output flyback voltages up to 100 V to allow short retrace times required in 2H and High-Definition TVs. Heptawatt package is...
Read More »Stereo Amplifier targets portable applications.
Operating from 2.2-5.5 V, Model TS4984 delivers 1 W per channel of continuous rms output power at 5 V into 8 ohm loads, with THD+N under 1%. It features SNR of 100 dBA and power supply rejection ratio of 62 dB at 217 Hz with grounded inputs. Dedicated circuitry guarantees virtually no pop and click at power-on or power-off. External standby mode control reduces supply current to less than 10 nA...
Read More »LED Driver ICs offer up to 16 channels of constant current.
Power Logic STPxxC596 and STPxxCL596 integrate functions needed to drive LEDs at constant current, set by external resistor. Once set, feedback mechanism monitors current and dynamically adjusts output to maintain programmed current level. Units are available in 8 or 16 output versions, with 3.3 and 5 V input voltages, and programmable output current from 15-120 mA. They accept serial data...
Read More »EEPROM Devices suit I2C and SPI bus applications.
Housed in 4.5 x 3.1 mm TSSOP8 package, Models M95512 and M24512 are 512-kbit devices that use 1.65 V, 0.18 micron EEPROM process technology. Compatible with SPI bus serial interface, Model M95512 offers high-speed frequency of 10 MHz and above with 5 ms write time. Model M24512 features I2C serial interface with 400 kHz clock rate. Both operate in 1.8-5.5 V and 2.5-5.5 V ranges. Units are suited...
Read More »IGBTs feature strip layout for operation up to 50 kHz.
PowerMESH STGP20NC60V and STGW20NC60V are 30 A, 600 V n-channel IGBTs offered in TO-220 or TO-247 packages, respectively. Optimized Crss/Ciss ratio avoids cross-conduction phenomena and low gate charge. Equivalent Model STGW20NC60VD comes in TO-247 package with co-packaged freewheeling diode. Rated 50 A, 600 V, Model STGW40NC60V comes in TO-247 package. All offer 150Ã-
Read More »Microprocessor Reset ICs suit monitoring applications.
Five-pin Series ST68xx features 5 circuit configurations, each with 5 voltage options, for total of 25 different types. Each configuration includes basic supervisor function of Power-On Reset/Low-Voltage Detect, which monitors system power and resets system processor when voltage is out of tolerance. Units offer push-button reset input, watchdog, and active high or active low reset outputs. Reset...
Read More »Audio Power Amplifier features one differential mono input.
Suited for mobile phones, laptops, PDAs, and portable audio devices, Model TS4994 is capable of delivering 1.2 W of continuous RMS power into 8 ohm load at 5 V, with total harmonic distortion of 1%, measured at 1 kHz. Differential design enables 85 dB common mode rejection ratio and 100 dB power supply rejection ratio, both at 217 Hz with grounded inputs. Housed in 0.5 mm-pitch flip-chip package,...
Read More »