MtronPTI
Orlando, FL 32804
Share:
OCXO measures 1 x 1.4 in.
Suited for applications in microwave radios, base stations, and test and measurement equipment, XO5120 Series OCXO offers -155 dBc phase noise performance at 10 kHz offset and 10 MHz nominal frequency. It also provides Ã-
Read More »OCXO comes in 1.0 x 0.8 x 0.5 in. enclosure.
Offered in SMT or through hole package, XO5183 series features close in phase noise performance of -90 dBc at 1 Hz offset for 10 MHz sinewave device; it can be as low as -100 dBc/Hz at 1 Hz offset for special applications. Products, offered from 10-120 MHz, deliver Ã-
Read More »Low Phase Noise OCXO comes in 1.0 x 1.0 x 0.5 in. package.
Hermetically sealed XO5083-022 matches industry standard thru-hole and SMD footprints and delivers phase noise performance of 165 dBc/Hz at 10 kHz offset. Requiring +12 V supply with sinewave output, it has frequency-temperature stability of Ã-
Read More »Oscillators use low jitter ASIC.
Using 0.13 micron, CMOS technology, QiK Chip(TM) ASIC comes in small die, allowing oscillator packages ranging from 3.5 x 6 mm SMD to full size DIP through-hole packages. Chip features 0.3 ps integrated jitter and frequencies up to 1.4 GHz. Measuring 5 x 7 mm, SMD Clock Oscillator Series M2100 is offered in frequencies from 150-1,400 MHz with PECL, LVDS, and CML outputs at 3.3 V and lower....
Read More »Crystal Oscillator suits telecommunication network systems.
Series MXO5165 Stratum 3 OCXO is available for 3.3 or 5.0 V operation and provides all inclusive stability of Ã-
Read More »
Oscillators produce low-jitter sine wave signal.
M4001/M4002 2.488 GHz VCSOs oscillators are suited for applications between 600 MHz and 2.5 GHz. Housed in 9 x 14 mm J-lead ceramic package, the M4001 is a 3.3 V device, and M4002 is a 5 V device. They offer sub-picosecond jitter at .15 ps RMS typical, and are suitable for use as IF local oscillators or mixer local-oscillator drivers for IQ modulators, mixers, and IEEE802.11b (WLAN), and ISM band...
Read More »
VCXOs and Clock Oscillators output frequencies to 800 MHz.
M5001/M5002 series (Clock Oscillator) and M5003/M5004 series (VCXOs) offer differential LVPECL/LVDS outputs. Clock oscillators and VCXOs provide frequency stability as low as +/-10 ppm. Both devices are packaged in surface-mount platform that is pin-for-pin compatible with 4- and 6-pin, ceramic, J-lead, 9 x 14 mm product families. Enable/Disable outputs with enable high is available, as well as...
Read More »Clock Oscillator and VCXO suit optical carrier applications.
Suitable for Gigabit Ethernet applications, UVCJ series clock oscillator and UVVJ series VCXO are available with LVPECL or LVDS outputs in 5 x 7 mm ceramic packages. Both devices are offered in frequencies up to 800 MHz and offer 1 picosec rms typical integrated jitter from 12 kHz to 20 MHz up to 800MHz. They provide combination of low noise and good thermal stability (to Ã-
Read More »
Clock Oscillator and VCXO offer frequencies up to 800 MHz.
M5RJ clock oscillator and MPV3J VCXO are available with LVPECL or LVDS output in 9 x 14 mm J-lead ceramic package. Both 3.3 V units have maximum integrated jitter as low as 0.5 ps rms (12 kHz to 20 MHz) at frequencies over 600 MHz. They are suitable for Optical Carrier and Gigabit Ethernet applications.
Read More »
Voltage Controlled Crystal Oscillator fits SONET applications.
MPV3 (3.3 V) and MPV5 (5.0 V) series 800 MHz VCXOs are suitable for stability and aging requirements of SONET/STM, Fibre Channel, Ethernet, and Optical Carrier applications, and meet requirements of Forward Error Correction (FEC) applications. Both are supplied in 9 x 14 mm surface mount package with single and dual complementary PECL outputs, and are available in frequencies of 1 to 800 MHz....
Read More »OCXO measures 1 x 1.4 in.
Suited for applications in microwave radios, base stations, and test and measurement equipment, XO5120 Series OCXO offers -155 dBc phase noise performance at 10 kHz offset and 10 MHz nominal frequency. It also provides Ã-
Read More »OCXO comes in 1.0 x 0.8 x 0.5 in. enclosure.
Offered in SMT or through hole package, XO5183 series features close in phase noise performance of -90 dBc at 1 Hz offset for 10 MHz sinewave device; it can be as low as -100 dBc/Hz at 1 Hz offset for special applications. Products, offered from 10-120 MHz, deliver Ã-
Read More »Low Phase Noise OCXO comes in 1.0 x 1.0 x 0.5 in. package.
Hermetically sealed XO5083-022 matches industry standard thru-hole and SMD footprints and delivers phase noise performance of 165 dBc/Hz at 10 kHz offset. Requiring +12 V supply with sinewave output, it has frequency-temperature stability of Ã-
Read More »Oscillators use low jitter ASIC.
Using 0.13 micron, CMOS technology, QiK Chip(TM) ASIC comes in small die, allowing oscillator packages ranging from 3.5 x 6 mm SMD to full size DIP through-hole packages. Chip features 0.3 ps integrated jitter and frequencies up to 1.4 GHz. Measuring 5 x 7 mm, SMD Clock Oscillator Series M2100 is offered in frequencies from 150-1,400 MHz with PECL, LVDS, and CML outputs at 3.3 V and lower....
Read More »Crystal Oscillator suits telecommunication network systems.
Series MXO5165 Stratum 3 OCXO is available for 3.3 or 5.0 V operation and provides all inclusive stability of Ã-
Read More »
Oscillators produce low-jitter sine wave signal.
M4001/M4002 2.488 GHz VCSOs oscillators are suited for applications between 600 MHz and 2.5 GHz. Housed in 9 x 14 mm J-lead ceramic package, the M4001 is a 3.3 V device, and M4002 is a 5 V device. They offer sub-picosecond jitter at .15 ps RMS typical, and are suitable for use as IF local oscillators or mixer local-oscillator drivers for IQ modulators, mixers, and IEEE802.11b (WLAN), and ISM band...
Read More »
VCXOs and Clock Oscillators output frequencies to 800 MHz.
M5001/M5002 series (Clock Oscillator) and M5003/M5004 series (VCXOs) offer differential LVPECL/LVDS outputs. Clock oscillators and VCXOs provide frequency stability as low as +/-10 ppm. Both devices are packaged in surface-mount platform that is pin-for-pin compatible with 4- and 6-pin, ceramic, J-lead, 9 x 14 mm product families. Enable/Disable outputs with enable high is available, as well as...
Read More »Clock Oscillator and VCXO suit optical carrier applications.
Suitable for Gigabit Ethernet applications, UVCJ series clock oscillator and UVVJ series VCXO are available with LVPECL or LVDS outputs in 5 x 7 mm ceramic packages. Both devices are offered in frequencies up to 800 MHz and offer 1 picosec rms typical integrated jitter from 12 kHz to 20 MHz up to 800MHz. They provide combination of low noise and good thermal stability (to Ã-
Read More »
Clock Oscillator and VCXO offer frequencies up to 800 MHz.
M5RJ clock oscillator and MPV3J VCXO are available with LVPECL or LVDS output in 9 x 14 mm J-lead ceramic package. Both 3.3 V units have maximum integrated jitter as low as 0.5 ps rms (12 kHz to 20 MHz) at frequencies over 600 MHz. They are suitable for Optical Carrier and Gigabit Ethernet applications.
Read More »
Voltage Controlled Crystal Oscillator fits SONET applications.
MPV3 (3.3 V) and MPV5 (5.0 V) series 800 MHz VCXOs are suitable for stability and aging requirements of SONET/STM, Fibre Channel, Ethernet, and Optical Carrier applications, and meet requirements of Forward Error Correction (FEC) applications. Both are supplied in 9 x 14 mm surface mount package with single and dual complementary PECL outputs, and are available in frequencies of 1 to 800 MHz....
Read More »