Graco, Inc.
Minneapolis, MN 55410-1441
New Sealed 4-Ball Plus Lower Pumps Come with No Throat Seal Liquid Needed
Offer highest fluid delivery at the lowest cycle rates and maintenance-free operation of factory paint circulation systems. Available in 2500 cc, 3000 cc and 4000 cc displacements and fits with existing or new electric, hydraulic and pneumatic pump assemblies. Two 2500 cc lowers can be installed together in an electric E-Flo DC pump to make a 5000 cc system that can put out up to 26 gallons of...
Read More »
Graco Launches SaniForce 2.0 Sanitary Equipment that is Ideal for Transferring Solids
Includes container unloading equipment for evacuation of medium to high-viscosity materials. Ideal for food, beverage, personal care and pharmaceutical applications. Can handle solids up to 3.8 inches in diameter without crushing or damaging the material.
Read More »
Graco Announces New Radial Piston Air Motors Which can Use up to 50 Percent Less Air
Works at low to medium speeds (<500 rpm) it makes ideal for mixing low to medium viscosity (<1000 cp) material in direct drive mode. Radial piston air motors uses not much compressed air than rotary vane motors and it can upgrade from rotary vane to radial piston agitation in just few minutes. Electric agitator motors are five times more efficient than pneumatic agitators and low sound motors.
Read More »
New Pro Xp Guns Include Wear Electrodes, Fluid Filters and Adjustment Knobs
Round spray nozzle and air cap combination maximizes wrap-around on cylindrical objects. Soft spray air cap and nozzles are ideal for small as well as lightweight parts that need fine finish with minimal paint flow. Fixed fluid flow guns extend component life when applying metallic and abrasive materials.
Read More »
New GrindLazer Depth Control System Comes with Remote Momentary Switch
Allows operators to adjust cutter depth on the fly with a push of button. Enables contractors to set the “zero point” to match the cutter assembly and view the “active cut depth” on the DCS display. Suitable for applications in which minimal surface alternation is significant and deliver cut depth accuracy within 0.01 in.
Read More »
New Pulse FC Fluid Control System Utilizes SD Series Preset Meters with Maximum Flow of 8 or 18 gpm
Provides service operations with control to automate and regulate fluid dispenses for optimal accountability and profitability. Converts SD preset meters to pulse FC and gain additional control of fluids. Allows for reporting, arming users with analysis needed to make informed decisions about scheduling, inventory and pricing.
Read More »
Graco Launches EcoQuip EQs Abrasive Blasting System That Can Blast with Two Nozzles
Features two outlets and a 12 cu-ft pressure pot that can blast up to four hours with two blasters at once. Suitable for industries such as oil and gas, marine and infrastructure. Designed for easy transportation and fits in an extended truck bed.
Read More »
TexSpray T-Max 6912 Sprayer Sprays Basecoat and Adhesives for Common EIFS Systems
Allows contractors to separate hopper and pump sections for easy transport while providing jobsite storage flexibility. Separate air compressor can switched to air-assisted mode for spraying heavier coatings, even those containing aggregates up to two millimeters. Provides the flexibility and performance to spray any interior and exterior texture application.
Read More »
New G-Force II Pressure Washers by Graco Feature Name Brand Components
Graco’s new G-Force II pressure washers offer three types of triplex plunger pumps, Honda or Kohler engines, depending on the models, and aluminum frames. Models are available with either lightweight direct-drive or heavy-duty belt-drive frames.
Read More »
Graco Presents LineLazer V 200MMA Airless Line Striper for Methyl-Methacrylate Applications
Uses mix-at-the-gun technology that is found on Graco’s Fusion® Gun for eliminating the costs of on-board solvents. Designed for applications ranging from high-traffic intersections to bike paths to city streets. Offered with quick gun adjustments and automatic line production capability and provides real-time job performance data for proof-of-job requirements.
Read More »Graco Inc. Celebrates 50th Anniversary of IPO
MINNEAPOLIS--(BUSINESS WIRE)-- Graco Inc. (NYSE:GGG), a leading manufacturer of fluid handling equipment, is pleased to celebrate the 50th anniversary of its initial public offering (IPO). Fifty years ago today, 277,650 shares of Graco common stock were offered on the local over-the-counter market, a significant milestone in the Company’s history. Graco had grown from humble beginnings in...
Read More »
New Sealed 4-Ball Plus Lower Pumps Come with No Throat Seal Liquid Needed
Offer highest fluid delivery at the lowest cycle rates and maintenance-free operation of factory paint circulation systems. Available in 2500 cc, 3000 cc and 4000 cc displacements and fits with existing or new electric, hydraulic and pneumatic pump assemblies. Two 2500 cc lowers can be installed together in an electric E-Flo DC pump to make a 5000 cc system that can put out up to 26 gallons of...
Read More »Graco Inc. Named a Best Workplace in Manufacturing and Production by Fortune Magazine
Minneapolis -- (Businesss Wire) --Sep. 18, 2019 -- Graco Inc.(NYSE:GGG), a leading manufacturer of fluid handling equipment, has been named one of the 2019 Best Workplaces in Manufacturing and Production, according to Fortune Magazine. Graco has been recognized on this list each of the three times it has participated. “I’m honored to work with such an engaged team of employees worldwide...
Read More »
Graco Launches SaniForce 2.0 Sanitary Equipment that is Ideal for Transferring Solids
Includes container unloading equipment for evacuation of medium to high-viscosity materials. Ideal for food, beverage, personal care and pharmaceutical applications. Can handle solids up to 3.8 inches in diameter without crushing or damaging the material.
Read More »
Graco Announces New Radial Piston Air Motors Which can Use up to 50 Percent Less Air
Works at low to medium speeds (<500 rpm) it makes ideal for mixing low to medium viscosity (<1000 cp) material in direct drive mode. Radial piston air motors uses not much compressed air than rotary vane motors and it can upgrade from rotary vane to radial piston agitation in just few minutes. Electric agitator motors are five times more efficient than pneumatic agitators and low sound motors.
Read More »
New Pro Xp Guns Include Wear Electrodes, Fluid Filters and Adjustment Knobs
Round spray nozzle and air cap combination maximizes wrap-around on cylindrical objects. Soft spray air cap and nozzles are ideal for small as well as lightweight parts that need fine finish with minimal paint flow. Fixed fluid flow guns extend component life when applying metallic and abrasive materials.
Read More »
New GrindLazer Depth Control System Comes with Remote Momentary Switch
Allows operators to adjust cutter depth on the fly with a push of button. Enables contractors to set the “zero point” to match the cutter assembly and view the “active cut depth” on the DCS display. Suitable for applications in which minimal surface alternation is significant and deliver cut depth accuracy within 0.01 in.
Read More »
New Pulse FC Fluid Control System Utilizes SD Series Preset Meters with Maximum Flow of 8 or 18 gpm
Provides service operations with control to automate and regulate fluid dispenses for optimal accountability and profitability. Converts SD preset meters to pulse FC and gain additional control of fluids. Allows for reporting, arming users with analysis needed to make informed decisions about scheduling, inventory and pricing.
Read More »
Graco Launches EcoQuip EQs Abrasive Blasting System That Can Blast with Two Nozzles
Features two outlets and a 12 cu-ft pressure pot that can blast up to four hours with two blasters at once. Suitable for industries such as oil and gas, marine and infrastructure. Designed for easy transportation and fits in an extended truck bed.
Read More »
TexSpray T-Max 6912 Sprayer Sprays Basecoat and Adhesives for Common EIFS Systems
Allows contractors to separate hopper and pump sections for easy transport while providing jobsite storage flexibility. Separate air compressor can switched to air-assisted mode for spraying heavier coatings, even those containing aggregates up to two millimeters. Provides the flexibility and performance to spray any interior and exterior texture application.
Read More »
