StarForce Technologies, Ltd.
Moscow RUS
Share:
Pull Handle suits off-highway vehicle applications.
Model 020-0800 Surface Mounted Pull Handle offers full-gloved hand clearance and can be keyed alike with single and reversible key systems. Handle installs with three M6 X 1.0 bolts and is capable of glass mounting with 2 holes. Gasket and spacers are available to facilitate mounting and provide resistance to water and dirt infiltration. Product suits off-highway vehicle applications that require...
Read More »Trim Saw cuts copper and aluminum tubes.
Model 315 produces repeatable, smooth, parallel cuts that are burr-free and require little or no surface cleaning. Heavy-duty base table and sub-assembly provide structural support, while hydraulically actuated tube clamp anchors various sized tubes that can be cut simultaneously. Hydraulic motor drives blade, and hydraulic cylinder with feed valve feeds blade through tubes. Lubrication and...
Read More »Shot Blasting System strips, cleans, and profiles in 1 pass.
With travel speed of 0-350 fpm and 48 in. blast pattern, BlastracÃ-® 2-4800DH strips, cleans, and profiles up to 30,000 ftÃ-² of concrete or 7,500 ftÃ-² of steel per hour. Machine is powered by 350 hp diesel engine and uses twin centrifugal blast wheels to propel blast media in controlled pattern and direction. Media is recycled for reuse, while onboard 3,500 cfm dust collector...
Read More »Portable Gas Detector comes with integrated PID.
Combining 2 instruments into one, Sirius Multigas Detector features PID in multigas unit. It enables users to monitor for hundreds of potentially dangerous vapors and chemicals. Equipped with alarm system that warns of hazardous situations, unit simultaneously monitors for VOCs and combustible, toxic, and oxygen-deficient atmospheres. Features include interchangeable lithium-ion and alkaline...
Read More »Elastomer Adhesive suits assembly of filter press belts.
Araldite AY 8683 resin/Hardener HY 8683 polyurea elastomeric adhesive bonds to variety of dissimilar substrates including stainless steel clip/closures and woven fabrics used for filter belts. Clear, light yellow-tinted elastomer features pourable mixed viscosity of 2,500-3,000 cP. After 24 hours at 77Ã-
Read More »Epoxy Siloxane applies in one coat.
Dual-component Polysiloxane XLE combines properties of epoxy and polyurethane in one coat. Glossy, self-priming coating is VOC-compliant and isocyanate-free and dries in 1 hr to corrosion-resistant finish. Suited for application by brush, roller, and conventional or airless spray equipment, product may be applied directly to properly prepared steel or over inorganic, zinc-rich primers. It is...
Read More »Single-Pole Connectors cater to power applications.
AMP Power Series 15, 30, and 45 Connectors share common genderless housing design and offer vertical and horizontal stacking capability. Separate contacts for 15, 30, or 45 A are employed to accommodate appropriate power rating. Maximum current rating is achieved with 45 A contact and 10 AWG wire. All contacts are rated for 600 V ac/dc. Housing is impact-resistant, color-coded, UL 94V-0...
Read More »Battery Charger has adjustable charge current termination.
Housed in 3 x 3 x 0.75 mm DFN package, LTC4068 standalone, linear, single-cell Li-Ion Lithium Polymer battery charger allows users to program charge cycle termination with system load concurrently applied to battery. Via one resistor, charge termination current can be accurately set to value of less than, more than, or equal to C/10. Thermal regulation scheme maximizes charger rate without risk...
Read More »Woodworking Saw allows 30 in. of ripping capacity.
Contractor's Saw-® line of 10 in. table saws are equipped with miter gage, straight grind table surface, and choice of 3 fence systems for cutting accuracy. All saws operate with a 2-capacitor 1-½ hp, 120/240 V motor and have a see-thru blade guard with splitter and anti-kickback fingers. Miter gage features 9 positive stops, including standard 45-° and 90-° stops, and fence systems all have...
Read More »Stationary Air Compressors offer 30 gal capacity.
Single-stage model incorporates 3 hp, 230 V electric motor and 10 in. flywheel. Two-stage model offers either 5.0 hp, 208-230 V electric motor or 8.0-11.0 hp gasoline engine, both with 15.7 in. flywheel. Other features include 14 gauge 2-piece belt guard, SS braided discharge hose, pneumatic idle control, and auto start/stop with optional continuous run, manual drain valves, and 7 gauge baseplate...
Read More »