DEK International GmbH
Zurich Ch-8005 CHE
Share:
![Tooling System facilitates hard part turning.](https://cfnewsads.thomasnet.com/images/medium/459/459938.jpg)
Tooling System facilitates hard part turning.
Machining steels and alloys hardened to 45-62 Rc levels, ValEDGE Hard Part Turning System utilizes ceramic and CBN inserts as well as ValTURN(TM) ProGRIP(TM) toolholders. It is provided with T-Land corner break width and angle as well as light hone finish. For vibration-free machining, spring-loaded clamp grips insert in 2 places. Inserts, offered with 35, 55, 60, 80, and 90Ã-
Read More »![Machine facilitates finishing/deburring of metal parts.](https://cfnewsads.thomasnet.com/images/medium/459/459937.jpg)
Machine facilitates finishing/deburring of metal parts.
Automated Model XLR-22 features long-radius channel that measures 22 ft x 8Ã-½ in. and provides constant media mass depth and media action. Parts are automatically separated from finishing media following once-around-and-out processing or batch cycling. Offering time cycles from 4-8 min, as well as variable amplitude and vibrations per minute, compact machine has 8Ã-¼ in. tub...
Read More »![Crack Tester enables 100% on-line inspection.](https://cfnewsads.thomasnet.com/images/medium/459/459936.jpg)
Crack Tester enables 100% on-line inspection.
Zetec InSight CT Eddy Current Crack Tester provides non-destructive detection of cracks or imperfections in critical components at production line speeds. It supports up to 8 dual frequency probes working from 5-10 MHz with sampling rate up to 10,000 samples/sec. Unit can communicate with other machinery via built-in industrial I/O. Data can be downloaded via RS232 serial port, Ethernet...
Read More »![Proportional Valve can be programmed via PDA or laptop.](https://cfnewsads.thomasnet.com/images/medium/459/459935.jpg)
Proportional Valve can be programmed via PDA or laptop.
Featuring onboard electronics, PowrFlow(TM) VED03M Valves are available in 6 flow rates from 1-9 gpm, 5 flow metering configurations, and 3 spool-centered conditions, resulting in 90 possible combinations. D03 style valves are rated to 5,000 psi, are equipped with 12/24 Vdc solenoids, and use standard 7-pin connectors at system end. Windows-based screen lets user set all programmable functions...
Read More »Ultrasonic Welding Cell utilizes 6-axis robot.
ULTRAROBOT incorporates robotics for assembly of multiple plastic components. End of arm weld head utilizes 2-4 different weld horns to accommodate different welding operations without tool change. WindowsÃ-®-based CNC controller, DIALOG Touch, controls all weld processes and interfaces with robot without PLC. Ethernet port allows ULTRAROBOT to interface directly with plant networks or...
Read More »![Vertical Honing System offers precision stroking.](https://cfnewsads.thomasnet.com/images/medium/459/459933.jpg)
Vertical Honing System offers precision stroking.
Model SV-200 features crosshatch pattern throughout entire bore length, allowing machine to dwell in any part of bore, end-to-end, to selectively remove stock. With 7.5 hp spindle motor and 3-axis hand wheel control, machine is suited for medium- to high-volume production honing of bores between .750-8 in. diameter. Machine incorporates WindowsÃ-®-based control system with drop-down menus...
Read More »PWM Controllers offer PFC shut-down feature.
Current Mode Controllers Series NCP1230 and NCP1231 allow power supply designers to shut-down power factor correction stage in light or no-load conditions. Units offer cycle skipping at light loads, internal ramp compensation, and frequency dithering. Both series are available in 65, 100, and 133 kHz frequency options. Series NCP1230 integrates 2.5 ms soft-start, while Series NCP1231 offers...
Read More »![Ultra-Sanitary Screener features gap-free design.](https://cfnewsads.thomasnet.com/images/medium/459/459931.jpg)
Ultra-Sanitary Screener features gap-free design.
Meeting cGMP, 3-A, USDA, and FDA standards, VibroscreenÃ-® includes domed lid, continuous weld seams, crevice-free interior, and washable underside. Wire mesh screening is offered in 304, 316, and magnetic 400 Series stainless steel. External interlocking flange configuration of frame envelops support ring of screen, allowing wire mesh to extend to interior walls of frame, eliminating gaps....
Read More »![Embedded Controllers suit industrial automation applications.](https://cfnewsads.thomasnet.com/images/medium/459/459930.jpg)
Embedded Controllers suit industrial automation applications.
Power PC Model EPPC-405 incorporates IBM PPC405GP, 32-bit processor with 200 or 266 MHz, enabling performance up to 375 MIPS. It supports IEC61131-3 programming as well as LINUX, RTLinux, QNX, vxWorks, and RTOS operating systems. Unit features Ethernet interface, 1 or 2 electrically isolated CAN interfaces and controllers, and one or two RS-232 serial interfaces. Model EPPC-405-UC offers 2 USB...
Read More »![Face Drivers enable gear hobbing in one operation.](https://cfnewsads.thomasnet.com/images/medium/459/459928.jpg)
Face Drivers enable gear hobbing in one operation.
Available in flange mount as well as morse-taper and straight shank, Series FDNC delivers concentricity/runout specifications of .00003-.00007. Center pin and drive disk system can be adjusted to achieve zero runout. Drive disks are available in clockwise, counterclockwise, and bi-directional versions. Using face driver allows entire workpiece to be exposed for machining and turned in one...
Read More »