Envirogen Technologies
Kingwood, TX 77339
Share:
![Corrosion Inhibitors prevents rust in wire EDM machines.](https://cfnewsads.thomasnet.com/images/medium/464/464511.jpg)
Corrosion Inhibitors prevents rust in wire EDM machines.
Added to de-ionized water between dirty water tank and clean water tank, H2O Plus prevents build-up of rust on workpieces and non-stainless work holders. Non-ionic product is efficient when used at concentration ratio of 1:100. Used at concentration ratio of 0.5:100, H2O Plus Blue prevents rust build-up and keeps machinery clean by loosening dirt and waste products from tank walls and hoses. Both...
Read More »![Grinding Fluid features high-lubricity formula.](https://cfnewsads.thomasnet.com/images/medium/464/464510.jpg)
Grinding Fluid features high-lubricity formula.
QUANTALUBEÃ-® 270 XL consists of water-based metalworking fluid designed to improve part quality in grinding applications. Helping to extend wheel life, fluid offers antiweld and antiwear properties as well as ability to remove heat and swarf from cutting area. Material removal process combines roughing and finishing while removing stock to precision limits. Product performs similarly to...
Read More »![Touchscreen Sensors target retail and gaming environments.](https://cfnewsads.thomasnet.com/images/medium/464/464507.jpg)
Touchscreen Sensors target retail and gaming environments.
ZYPOSÃ-® projected capacitive technology touch sensors are based on principle of embedding micro-fine sensing wires within multi-layer laminated screen behind protective front surface, ensuring that sensing medium is protected from accidental and malicious damage. With unlimited touch life, PCT is drift-free and can be operated with gloved or ungloved hand with response time of less than 20...
Read More »![Plasma Cutting System has lightweight, portable design.](https://cfnewsads.thomasnet.com/images/medium/464/464509.jpg)
Plasma Cutting System has lightweight, portable design.
Weighing 44 lb, FP-20A incorporates inverter power supply that links unit to primary voltage from 115-230 V, single-phase, 50 or 60 Hz. Unit comes equipped with SL60(TM) 1TorchÃ-®, which features trigger release and ergonomic handle. Able to cut through rusted, painted, or coated surfaces without prior surface preparation, product delivers clean cuts on various metals and provides genuine cut...
Read More »![Tool System provides secure storage for specialty tools.](https://cfnewsads.thomasnet.com/images/medium/464/464506.jpg)
Tool System provides secure storage for specialty tools.
Remstar Light SentinelÃ-® offers secure, monitored access to up to 360 individual tools and items used in warehousing operations. To access system, operators enter or scan employee ID number. Vertically rotating shelves move up and down along tracking guide, delivering stored items to operator. Adjustable divider enables carrier compartments to be configured from 6 x 16 x 4 in. to 86 x 16 x 9...
Read More »![Turbo Pumps handle heavy particulate loads.](https://cfnewsads.thomasnet.com/images/medium/464/464505.jpg)
Turbo Pumps handle heavy particulate loads.
Turbo Pumps feature combination of pumping speeds from 1,200-2,100 l/s and throughput up to 2 slpm. Rotor/bearing design ensures MTBF better than 200,000 hours. Suited for harsh duty applications, pumps are designed to operate safely even after sudden stops. All utilize integrated controller with interchangeable peripherals and cables, and are available with IP54-rated integrated power supplies...
Read More »![ElectrolyticTilt Sensor provides linear output.](https://cfnewsads.thomasnet.com/images/medium/464/464495.jpg)
ElectrolyticTilt Sensor provides linear output.
Single Axis Linear Output Electrolytic Tilt Sensor features Ã-
Read More »![Filtration System filters process fluid within tank.](https://cfnewsads.thomasnet.com/images/medium/464/464494.jpg)
Filtration System filters process fluid within tank.
In-Tank Filtration System comes with 50 micron filter cartridge made of corrosion-resistant CPVC with FPM seals for chemical resistance. Single and double filter cartridge models are available, both with choice of WEBSTER(TM) brand Series D or S pumps, which are seal-less and can be run dry. Replacement cartridges are available in 1, 5, 10, 30, 75, and 100 micron ratings with 1 in. ID and...
Read More »![Roll Splitters eliminate manual roll removal.](https://cfnewsads.thomasnet.com/images/medium/464/464485.jpg)
Roll Splitters eliminate manual roll removal.
Model 30 and Model 72 automatically remove defective and/or out-of-spec plastic stretch film, paper, foil, and paper waste from cardboard cores in as little as 8 sec. Designed to replace manual methods for roll removal, machines feature safety gate and mandrel that must be closed and secured to permit operation as well as see-through safety cage. Model 30 and Model 72 handle max roll diameters of...
Read More »![CNC Lathe combines turning and machining.](https://cfnewsads.thomasnet.com/images/medium/464/464483.jpg)
CNC Lathe combines turning and machining.
With 124.02 x 64.96 in. footprint and 20 in. swing, Model M 20 offers rapid traverse rates of 394 ipm on X-axis and 295 ipm on Z-axis. Belt-driven, cartridge-style, gearless headstock has 15 hp AC GE Fanuc P-type spindle motor with variable speed drive, permitting full horsepower at spindle speeds as low as 275 rpm. Featuring 10.4 in. color LCD, GE Fanuc 21i-T control offers machining cycles for...
Read More »