SEVAAN GROUP Pty Ltd
Minto AUS
Share:
Ironworker is designed for in-plant or on-the-job operation.
Porta-Fab 45 Hydraulic Ironworker is supplied with steel base and powered by 2 HP, 110 V motor. It features 45 ton punch, 4 1/4 in. throat depth, 6 in. flat bar shear, 3 in. angle shear, 3/4 in. round shear and tool table workstation. Optional tooling includes rectangular notcher, V notcher, 8 and 12 in. brakes, pipe notcher, tube shear and picket tool.
Read More »
Engine Lathes feature touch screen controls.
Clausing/Metosa Smart Lathes are complete with electronic stops, taper adjustment, high speed threader and tracing. They are available with swings from 13 to 24 in., in either geared head model with 9 or 12 speeds, or with variable Constant Surface Speed spindle having 3 speed ranges. GE Fanuc Quickpanel Jr. II Graphic Guidance Control touch screen guides operator through programming cycles and...
Read More »
Geared Head Lathe provides vibration-free cutting.
Clausing/Colchester 15 x 50 in. Geared Head Lathe features combined vee and flat configuration on extra-wide hardened and ground bed that allows accurate machining to within .0001 in. Cross slide runs along dovetail guide, and both saddle and cross slide have adjustable gib strips. Lathe has headstock with 16 spindle speeds from 25 to 2000 RPM, Gamet spindle bearings, and automatically lubricated...
Read More »
Fork Extensions are available with retainers.
Fork Extensions with Push Block Spacer are designed to make loading pallets on back of truck quicker and more convenient. They are available in lengths of 48, 54, 60, 72, 84, and 96 in. Extensions accommodate existing fork widths of 4, 5, and 6 in. that are up to 2 in. thick. Block allows pallets to be pushed 2 or 3 deep into truck.
Read More »
Pallet Rack Shield prevents spilled loads.
Cargotainer Rack-Shield protects pallet loads from accidental spillage, slippage, or dislodgement while being stored or retrieved from rack bays. Wire mesh panels attach to rear opening of pallet rack rows, and prevent pallet loads from edging out. Constructed of durable wire mesh, and resistance welded at every wire crossover point, Rack-Shield panels are available to meet any pallet rack...
Read More »
Elastomeric Couplings feature 347 cast stainless steel ring.
Jaw In-Shear (JIS) 6-Pin elastomeric couplings are non-lubricated, drop-in replacements for grid spacer couplings. Converting to in-shear service doubles standard Jaw Coupling's angular misalignment capability to 20 and its parallel misalignment capability to 0.030-0.094 in., depending on size. Units fill BSE (Between Shaft End) gaps of 3.5, 5, 7, and 9 in., with maximum bores up to 5.5 in.,...
Read More »
Temperature Controller fits on DIN rail.
R6000 temperature controller accepts 8 channels of thermocouple and RTD inputs and has response time of 100 msec for 8 control zones. It features RS485, Modbus, Profibus DP, CAN and CANOpen interfaces; 16 digital I/O that are configurable for any zone; and LED status display for I/O. Four analog outputs are available as option. Applications include plastics injection molding, plastics extrusion,...
Read More »
Network Tester pings LANs to check connectivity.
Handheld Pinger Model 60 tester can be used for installing and maintaining computer Local Area Networks running TCP/IP protocol. It uses Ping function to verify connectivity, check transmitted and received data integrity, indicate network traffic loading by measuring round trip time, and notify of duplicate IP address responses. It also provides MAC address of IP address, and warns user when...
Read More »
HVAC Drive can be mounted outdoors.
Class 8839 ECONO-flex Type 3R Adjustable Speed AC Drive features thermal management system that permits equipment operation in -10 to +50 deg C ambient temperatures. Coordinated circuit breaker provides short circuit protection. Motor isolation and bypass contactors have mechanical and electrical interlock to prevent accidental backfeeding. Drive is pre-programmed for HVAC variable torque...
Read More »Ultrasonic Sensors can be configured via software tools.
USDS Series Sensors measure distances ranging from 50 mm to 10 m. They have analog outputs of 4 to 20 Ma. Two switching outputs allow them to be used as either analog distance measuring sensors or proximity switches. USDS series sensors are suitable for level measuring applications, and can also be used in various non-measuring applications. They maintain absolute accuracy of 1.5% between -25Ã-
Read More »