SEVAAN GROUP Pty Ltd
Minto AUS
Share:
Gearmotors now come in smaller sizes.
New models in Clincher(TM) line of parallel shaft-mount gearmotors and speed reducers include: SK0182NB with gear ratios from 4.24:1 to 81.0:1, output speeds to 413 rpm and torque up to 1,027 lb-in.; SK0282NB with ratio from 4.03:1 to 139.0:1, output speeds to 434 rpm and torque to 1,443 lb-in.; and SK1382NB with ratios from 16.28:1 to over 381.0:1, output speeds to 107 rpm and torque to 3,275...
Read More »Latex Coating paints interior and exterior walls.
Devflex 4205 semi-gloss, waterborne, acrylic latex coating can be applied to properly prepared surfaces including drywall, wood, masonry, and metal surfaces in institutional, commercial and light industrial areas. Low-odor, low-VOC latex dries quickly and cleans up with soap and water. Non-yellowing coating applies by brush, roll or spray. It is available in white and colors.
Read More »
Recovery Software restores drives, controllers, and HMIs.
Windows-based DataGuard(TM) ensures survivability of information critical to operating company's Series 1100 and 2000 drives, Series 4000 controller, and Human Machine Interfaces (HMIs). It preserves exact configuration of system, or portion of system, at given point in time. Service personnel use it to get line running again in minutes, in event of data loss or corruption due to power surge,...
Read More »
Power Relay provides high capacity in compact size.
Pb- and Cd-free NAiS Brand LZ 16 Amp, Form A and Form C power relay has high insulation resistance due to 10 mm creepage and clearance, providing protection from noise and surges. Low-profile unit measures 1.134 in. long, 0.492 in. wide, and 0.618 in. high. It operates at 185 deg F (class B) or 221 deg F (class F) and has low operating power of 400 mW. Applications include ovens, refrigerators,...
Read More »Alignment Kit measures machinery.
Microgage provides precise measurements of machinery straightness, surface flatness, rail and slide parallelism, and squareness of equipment. It consists of compact laser transmitter and digital receiver that captures laser reference beam and provides digital readout of laser's position. Placing laser on moving slide or table allows digital receiver to measure worn areas, locations where binding...
Read More »
Aerator restores flow characteristics to bulk materials.
Bin-Flo(R) Aerator restores original capacity of any dry, pulverized material to flow readily from bins, hoppers, or through chutes. This flow characteristic exists when air is present in material. After storage, air escapes, allowing material to pack, thus preventing flow. Aerator replaces air so material again moves freely. Aerator layout can be designed for any variations in bin size and...
Read More »
Universal Loop Display shows process status in field.
Programmable SPD accepts 4-20 mA input and indicates real-time status in mA, percent, or any designated engineering unit. Accuracy is +/-0.012% of input scale. It has rugged metal, RFI/EMI-resistant, NEMA 4X/IP66 housing, 1.15 in. 5-digit display, and back-lighting option that allows viewing at long distances or in dimly lit conditions. Configuration is via Intelligent PC Configuration Software,...
Read More »Document Control Software updates assembly information.
iView web-centric software provides interactive paperless documentation to factory floor, including assembly instructions, graphical inspection guidance, and pre-production checklists. Factory floor viewers present appropriate assembly information to operator, restrict improper revision access automatically, and provide detailed information, all graphically. It lets factory viewers know what has...
Read More »
Micro Grinder is available with various size motors.
Electer E-Max Ultra-Precision, Multi-Purpose Micro Grinder uses built-in microchip processor for optimum motor output. For easy handling and control, on/off switch is located directly on motor. Available speed ramges include 1,000 to 35,000 rpm, 1,000 to 29,000 rpm and, 1,000 to 15,000 rpm. Control unit includes digital speed display in x1000 rpm, soft touch buttons, and computer control.
Read More »
Module System speeds drive programming.
Electronic Programming Module (EPM) System consists of memory chip that plugs into front of SC Series drive and hand-held EPM Programmer. Programming changes can be made from drive's front keypad, PC, or by plugging drive's EPM into EPM Programmer. Drive profiles can be copied from EPM into Programmer memory. Using EPM Programmer's backlit 16-character LCD display, operator can label and store up...
Read More »