SEVAAN GROUP Pty Ltd
Minto AUS
Share:
Software Suite provides inspection and reverse engineering.
Horizon enables users to work with 3D coordinate measurement data. Users can selectively drop and drag measurements, as well as view, verify, report, and edit data in real-time. Laser trackers, theodolites, and other measurement instruments can be set up wherever necessary for quick online verification of 3D object data. Software can import digitized point data from virtually any source, and...
Read More »Antenna features permanent mount package.
PML 902-928 MHz, 1/4 wave antenna is attached by placing its base through 1/4 in. hole in product and securing with nut or by threading it into PEM-style insert. Antenna is fed through base with RG-174 coax cable, which may be soldered directly to board or attached using 50-ohm connector. Base features articulating joint for 90Ã-
Read More »Hydraulic Excavators feature increased hp and operator comfort.
Models 318C L and 315C LN each produce net power of 125 hp (93 kW) using 6-cylinder, turbocharged CatÃ-® 3055T diesel engine. LN version features transport width of 8 ft 6 in. when equipped with 20 or 24 in. shoes. L version has transport width of 9 ft 3 in. with 24 in. shoes. Both models use open-center, 2-pump hydraulic system with automatic boom and swing priority. Maximum digging depth is...
Read More »Pully Drive System integrates with linear module applications.
LPB integrated geared pulley drive system is available in sizes from 70 to 120 mm with ratios of 1:1, 3:1, 5:1, and 10:1. Gearbox has flange output, allowing it to be nested inside pulley, eliminating need for right angle gearbox, couplings and/or additional bearings. LPB design increases radial load capacity associated with belt and pulley applications, greatly increasing output bearing life.
Read More »Gas Analyzer operates at 0.5 scfh.
Thermal Conductivity Detector (TCD) gas analyzer detects gas composition by measuring difference in thermal conductivity between reference and sample gas streams. It uses dual pass sampling system, which allows it to be configured to analyze number of gas combinations. Available output options include 2 and 4-relay output cards; RS232, RS485, and Devicenet communications cards; and 0-10 V or 4-20...
Read More »Piezoelectric Accelerometer offers TEDS capabilities.
Model 66AXX miniature (5.5 g) tri-axial piezoelectric accelerometer offers integral hybrid electronics. TEDS capabilities provide digital ID communication that is IEEE P1451.4 compliant between dedicated signal conditioner and accelerometer. Accelerometer also offers annular shear sensing element, titanium package, and signal output via 4-pin receptacle. Model 66AXX is available in 66A50 (5...
Read More »Fanout Buffer includes 2:1 MUX input.
Model SY89830U fully differential PECL/LVPECL 1:4 fanout buffer operates down to +2.3 V. Model SY100EP15V, rated at 3.3V/5V, offers one input as single-ended while other input to MUX is differential. It also includes VBB reference voltage for single-ended inputs or AC-coupled applications. Each fanout buffer includes synchronous enable function that forces all outputs into fixed logic state...
Read More »Software facilitates set up of linear and rotary actuators.
proTern(TM) software is designed for Ternary linear and rotary actuator system. With Ternary, any of 16 specific positions can be defined via software, then achieved with absolute accuracy. proTern provides real numerical data for position, velocity, acceleration, deceleration, and force/torque commands using PC or handheld PDA. Ternary is available in 46 mm frame size, with stroke lengths of 25...
Read More »Electro-Coagulation System removes impurities from oils.
Typically used for pretreatment of emulsified oils, ECL Series has flow rate of 5 gallons per minute. It features 230V, single phase, 20 amp electrical motor with .75 hp pump and 175 gallon cone tank. It is also suitable for removal of suspended solids, removal of complex organics, and destruction and removal of bacteria, viruses, and cysts.
Read More »Solid Sodium Chlorite absorbs and dissipates heat.
Thermally stable Saf-T-Chlor(TM) provides safety under extreme upset conditions. It will not undergo runaway decomposition, even when exposed to intense, direct heat source such as flame. Saf-T-Chlor cartridges are supplied in DOT-approved containers, available in full range of sizes. They are factory-sealed and require no direct contact with chemical by customer personnel.
Read More »