Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Ionizing Air Blower eliminates static charges.
Steady-state DC Model 1552 Megastatic Ionizing Air Blower eliminates static in plastics component applications. Available as self-balancing static control blower, it is offered in sizes from 8 to 48 in. It can be used at workstations or over manufacturing machines for lowering dust contamination potential and reducing operator shocks. Ionizers are available with heaters and speed control, and do...
Read More »
Load Cell combines with panel meter.
LPU/DPM-3 system includes LPU Low Profile Universal Load Cell and DPM-3 panel-mount meter. Tension or compression load cell is available in 14 ranges from 100 to 50,000 lb. Hold down is via outside-diameter counter-bored thru holes, and loading is thru center at either end. DPM-3 scales to full five digits, samples at 60 readings/sec, and has analog output and true peak reading capability.
Read More »
Packaging Station configures to suit needs.
Four-leg workbench, with telescoping legs, allows worksurface height adjustment ranging between 30 to 36 in., in 2 in. increments. Station has 1/2-ton load capacity, bench sizes from 30x60 to 36x72 in., impact- and chemical-resistant, laminate worksurface, and 180 deg rolled front edge. Solid-maple tops are also available. Accessories include shelves, shelf dividers, electrical channels,...
Read More »
Condo Wiring Panel brings in voice, data and video cables.
LittleBrother(TM) 5575 Multi-Media Manager meets on-premise structured wiring needs of apartments and condos. Layout provides logical, separate channels for voice, data, and video cables. Modules provide 6 voice ports, 6 data ports, and 8-way video splitting. Small, 8.75 x 11.125 in. unit supports 20 separate terminal locations within single residence and complies with TIA 570-A, EIA/TIA 568B...
Read More »
Stamping Press forms drawn parts at high speeds.
Combination Link Series increases production speed by as much as 100% during blanking, coining and deep-draw work up to 6 in. Link press slows down at bottom of work stroke, providing extra dwell time for better material flow when part shape is drawn. Press then speeds up on return stroke and approach to minimize cycle time. Slower stroke also provides tighter forming tolerances.
Read More »
Casting Compound suits embedding and casting applications.
Flexible TRA-BOND 240-2 low-viscosity, polyurethane-casting system, suitable for low-vacuum applications, is NASA outgassing approved, and has near-zero shrinkage, providing low residual stress. Compound bonds to ceramics, glass, metals, and many plastics. Fully cured adhesive acts as electrical insulator.
Read More »
Integrated Development Environment produces fast ZSP code.
MULTI(R) Integrated Development Environment (IDE), along with optmizing compilers, automates embedded software development for LSI Logic's ZSP(TM) digital signal processors. With peak performance of 800 MIPS at 200 MHz, ZSP400 cores can execute 400 million multiply-accumulate operations per second. MULTI IDE includes window-oriented editor, ZSP-optimized source-level debugger, graphical program...
Read More »
Carbide End Mills are diamond coated.
Long Flute/Long Shank Miniature end mills are designed for milling small, intricate cavities in molds and graphite electrodes. Micrograin-carbide end mills produce high finishes and allow single-pass cleanup on side of molds and electrodes, eliminating step overlap lines. Tool diameters range from 1/64 to 1/4 in.
Read More »
Diaphragm Chuck grips compressor scrolls.
7 in. Diaphragm Chuck is designed to grip cast-iron compressor scrolls on drive shaft hub for finish milling of scroll walls and face. 8 air-open/spring-clamp chucks are mounted on tombstone. Chucks have pulldown action to pull scroll onto fixed stop for zero Z-axis location. Jaws change out for 2 sizes of scrolls and repeat to 1/10,000 TIR. SAE or metric sizes range from 3 in.(76 mm) to 12...
Read More »
Modules provide direct AC input for sensor applications.
Ricos modules allow direct AC input for any sensor/initiator applications required to use AC at 115V or 230V. They enable 4 inputs in 1 unit. When used in conjunction with buscoupler, AC expansion modules have local force, lock, and trigger diagnostic features. Compatible with Profibus-DP, Interbus-S, DeviceNet, Ethernet and CANopen protocols, modules offer test points at each termination point,...
Read More »