Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Locking Device visually confirms valve open/closed status.
Retrolok allows visual determination of whether quarterturn valves are locked open or closed via looking at its locking pin flag. Retrolok can be installed without modification to existing automation packages and without special skills.
Read More »
Vacuum Gauges work alone or with others.
Models 7ER/FR, 2AR, and 4AR are analog or microprocessor-based gauges for stand-alone vacuum measurement and control. They provide local readout or direct interface with chart recorder or data acquisition system. Guages can be integrated into most process systems and measure in range of 10E+03 to 10E-11 Torr. They employ double-inverted magnetrons which withstand sudden in-rushes of gas, are...
Read More »
IBC prevents material from sticking to walls.
Hopper Bottom Intermediate Bulk Container features 30 deg angle, hopper-shaped bottom that promotes consistent flow and complete drainage. Seamless, UV- and chemical-resistant IBC is rotomolded from linear low density polyethylene, and includes 2 in. full port valve as either bottom or side discharge and 23 in. top with lever lock ring. Container is offered in 285 and 330 gal capacities measuring...
Read More »
Linear Encoder works with fiber optic splicing machines.
RGH25F non-contact linear encoder with cut-to-length scale and low-mass readhead provides resolutions from 5 microns to 10 nm for accurate fiber positioning. It works at speeds to 300 mm/sec to keep up with quick-moving, multi-axis fiber optic splicing, joining, and bonding devices. Its self-adhesive gold-plated steel tape scale is easy to install. Filter optics provide immunity to dust,...
Read More »
Cutting Machine handles stranded cables up to 3/0 AWG.
PowerCut 3500 automatically cuts large round cables up to 1.0 in. dia and flat ribbon cables up to 3.9 in. wide. It features electronic control and variety of interfaces for accessories. Feed belts are driven by servo-motor that transports material in length increments of 0.004 in. while providing extra feeding power needed for heavier cables. Pneumatic cutting machine can be used alone or fully...
Read More »
Tying Machine has maximum tying diameter of 6 in.
TM 66 ties coils, hanks, or bundles of wire, cable and tubing. It automatically wraps tension elastic cord around material to be bound, ties knot in cord and cuts ends. Minimum tying diameter is 0.2 in. Machine includes adjustable tying tension and automatic cord loading. Electronic safety eye or sensor monitors and prevents machine from operating if there are objects or hands above cut-out.
Read More »
Prefeeder suits small to medium spools of wire or cable.
PreFeeder 1100 benchtop electric demand prefeeder is capable of utilizing outer cable diameters up to 6 mm and outer cable reel diameters up to 475 mm. It has adjustable feed belt that prevents damage to wire or cable during transport, quick lock cam mechanism for cable loading, and standard interface for connecting to cutting and/or cutting and stripping machines.
Read More »
Turbine Meter offers low flow measurement.
C-OH45-A Low Flow Turbine Meter is based on pelton wheel-like rotor and features 316 stainless steel housing and self-lubricating ball bearings. It offers flow measurement for clean, low and moderate viscosity liquids in 12 overlapping ranges from 0.015 to 3.00 gpm, with accuracy of +/-1% (after linearization) over 10:1 flow range. Unit has max pressure rating of 1,000 psi and temperature range...
Read More »Tiny MSOP Package supports 32 and 64 kbit serial EEPROMS.
With 2.5 V operating voltage, 1 milliamp active current, and 1 microamp standby current, 24LCXX device suits most applications. 24AAXX version enables operation down to 1.8V for battery-powered applications. Eight-lead package is designed with company's PEEC technology; footprint is approximately 14.7 cu mm (including leads), 23% smaller than TSSOP package. At 1.1 mm in height, MSOP is 29% lower...
Read More »
DC-DC Converter generates regulated output.
Switched-capacitor ZXCP330E6 provides 3.3V output from 2 to 4.4 V input with maximum load current of 40 mA. Short-circuit and thermal-overload protected, SOT23-6 packaged converter suits lithium-ion and alkaline battery-powered products. Operating with flying capacitor of 220nF and 10 microF bypass capacitors at input and output, typical PCB area requirement is 8 x 5.3 mm. It draws 20 microA...
Read More »