Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Pressure Tanks provide stainless steel service connections.
Pro-SourcePLUS(TM) steel tanks are available with capacities from 19 to 85 gallons. With heavy-gauge steel tank construction, 3 largest models have maximum operating pressure of 125 psi. Tanks offer electrostatically applied, oven-baked polyester paint that resists nicks and corrosion. They incorporate seamless, 1-piece water cells that provide controlled two-dimensional expansion and are...
Read More »
Rack Mounted Industrial PC is UL/CE/FCC approved.
APC System has 19 in. chassis (4U high by 450 mm deep). Industrial slot PC can be fitted with any Intel Socket370 Coppermine CPU up to 1 GHz Intel Pentium III (133 MHz FSB). Standard backplane configuration offers 14 expansion slots (8 ISA, 4 PCI, and 2 ISA/PCI); other options are available. It can be supplied pre-installed and configured with standard desktop or embedded operating systems such...
Read More »
Centrifugal Fans provide exhaust or supply.
Series 205 have backwardly inclined, centrifugal wheel and heavy gauge galvanized housing. Eleven sizes range from 10 to 36 in. and are field rotatable to any of 8 discharge positions. Airflow ranges are 500 to 29,000 cfm with static pressure to 5 in. wg. Class I units are AMCA certified for air and sound as well as UL 705 approved with UL 762 option. They are suitable for applications in...
Read More »
Digital Stroboscope suits non-contact measurement.
Portable Model PK2 has internal NiMH battery that provides one full hour of continuous operating time, regardless of flash rate. It offers flash brightness of 800 Lux and flash rate up to 12,500 flashes/min. CE-certified, unit provides accurate speed control with drift-free operation, resolution of Ã-
Read More »
Power Supply measures only 1.75 in. high.
Low-profile PowerBank PB1506PFC offers power-factor correction capabilities. From inputs of 115/230 Vac, unit provides up to 6 configurable main outputs and 2 low-power auxiliary outputs; output power is 1,200 W at 110 Vac and 1,500 W at 220 Vac. Unit is suited for 19 in. rack applications and can also be used as stand-alone box. Offered with various mounting options, it also includes internal...
Read More »
LED Flashlight is saftey approved for industrial use.
Model 3N(TM) is Class I, II, Division 1, and Class II classified for use in hazardous environments. Equipped with 3 high-intensity white LEDs, flashlight provides up to 120 continuous hours of power using 3 N-size alkaline batteries. Unit offers non-conductive polymer case and unbreakable polycarbonate lens. Pushbutton tail cap provides momentary and constant on switching. Pocket clip allows...
Read More »
Power Supply withstands harsh environments.
Stick-welding Model SRH-503 incorporates hand crank on front for infinite amperage control. Unit offers output of 50 to 525 A and maximum open circuit voltage of 77 Vdc. Suited for stick welding and gouging with carbons up to 3/8 in. dia., product features built-in running gear for mobility. It suits light and heavy fabrication, pipe, and ship building applications, and withstands harsh...
Read More »
Portable Videoscope reaches difficult locations.
Self-contained device allows inspection for erosion, corrosion, weld quality, surface wear, and security. Operator views area using handheld, color LCD display. Videoscope includes 1 in. CCD camera, with light source, attached to 60 ft cable. Standard, fully submersible head can be interchanged with optional, splash-proof, pan/tilt 2 in. diameter camera, with built-in lighting and full...
Read More »
Transmitter and Receiver handle 115 kbps data rate.
ASK (Amplitude Shift Keyed) pair, Model MICRF005 receiver and Model MICRF103 transmitter, provide up to 115 kbps data rate at operating frequencies from 800 MHz to 1 GHz for short-range wireless applications. MICRF005 requires only 2 capacitors and a reference oscillator to implement complete RF receiver. Both devices operate from 5 V supply. MICRF005 consumes 10 mA supply current, while MICRF103...
Read More »CNC Lathe includes sub-spindle for increased capacity.
Main spindle of Model JD-3 offers 2 in. diameter bar capacity. Unit's synchronized main and sub-spindles complete both rough and finishing operations, allowing lathe to transfer parts on the fly between spindles. Main and sub-spindle speeds reach 4,000 rpm, with 15 and 5 hp motors. Able to be used in stand-alone situations and integrated into flexible transfer lines, JD-3 incorporates controller...
Read More »