Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Tote Cleaner survives harsh environments.
Weighing less than 8 lb and measuring 10 in. long, Gamajet 9 Tote Blaster fits through small port openings to clean all types of totes and tank trucks. Its 360Ã-
Read More »Paralleling Switchgear Control streamlines operator control.
Entellisys Pro(TM) allows one operator, from one location, to monitor and control entire facility's power distribution system. It increases system redundancy to maximize uptime and minimize interruptions. In emergency situations, each generator automatically starts and parallels itself to generator bus. Features include built-in SCADA system, data tracking and timing, automatic generator kW and...
Read More »
Surge Protectors provide solid state telephony protection.
Series TLT-XT is listed to UL Standard 497A and provides secondary protection for customer premise side of telephone company's network interface device. Circuitry protects against transient energies induced on phone lines by lightning, utilities, and other sources. Models are available for Dial-Up, Leased/Dedicated and T1 applications. Each has safety fusing to protect against power line crosses...
Read More »Current Transducers feature split-core functionality.
DIN-rail mount Series AP/APR offers user-selectable input ranges from 10-400 A and choice of 4-20 mA or 0-5/0-10 V outputs. They include quick-connect control signal wiring and large aperture with built-in stress relief. Transducers utilize PRIMEÃ-® technology, where current is sensed without use of magnetic circuit, providing immunity against saturation due to over-current conditions. True...
Read More »
I/O Boards provide 10 counter/timers.
Counter/timer I/O boards, Model APC48x for desktop PCI and Model AcPC48x for CompactPCI, offer several models with up to 10 quadrature/counter/timer channels. Configurations are available with 16 or 32-bit counters and TTL or RS422 interfaces. Quadrature measurement supports X1, X2, X4, and index pulse decoding. Units are suited for counting events, generating waveform control signals, measuring...
Read More »
Switches control level of refrigerant recovery tanks.
The 80% Shut-Off Switches meet UL requirements for Refrigerant Recovery Equipment and are specified to meet dimensions of recovery tank manufacturer. They offer pressure rating to 400 psig and are standard for 30 and 50 lb DOT refrigerant tanks. UL endurance tests have been performed at 120/60, 240/60, 24/60, 5 Vdc, 12 Vdc and 24 Vdc.
Read More »
Chart Recorder offers clockwise and counterclockwise rotation.
Model LCR10 10 in. circular chart recorder can be programmed for Type J, K, T, R, S, or B thermocouples; 100 ohm DIN platinum RTD; or 4-20 mA. Chart speeds are selectable from 4-168 hr rotation. Standard battery backup allows for up to 72 hr of operation after loss of main power. Enclosure is rated at NEMA 12X. Optional alarm may be programmed as high, low, or guard band alarm. Model LCR10 uses...
Read More »Calibration System calibrates vibration sensors.
Self-contained, portable Model K9100C includes everything needed to calibrate displacement, velocity, and acceleration sensors when operated with user-supplied sensor signal conditioning. Two 10-turn potentiometers set test parameters for calibrating sensors in bandwidth from 10 Hz to 10 kHz. System produces NIST-traceable reports that comply with ISO 17025/A2LA requirements. Included...
Read More »
Switch Mode Power Supplies feature 100 kW modules.
PowerMod(TM) HVPS Switching Mode DC Power Supplies are solid-state units available in 100 kW increments, which can be combined to provide up to 500 kW of high voltage power from 10-150 kV with N+1 reliability. Designed for front panel or remote operation, units are 95% efficient, depending upon application. Featuring full over-voltage and over-current protection up to +30% of preset, they provide...
Read More »Insert Grade suits stainless steel turning applications.
Equipped with MT-CVD coating to reduce flaking, built-up edges, and adhesions, C2025 insert grade incorporates multi-layer that enables resistance to crack growth. All-in-one insert grade is available with up to 7 insert geometries from finishing to roughing. Product, suited for small batch productions in stainless steel, also handles intermittent machining and machining of forged skin and duplex...
Read More »