Aprima Medical Software, Inc

Meter/Mix System suits potting and bonding applications.
Material Handling & Storage

Meter/Mix System suits potting and bonding applications.

Benchtop See-FloÂ-® 387 dispenses shots of 2-component epoxy, silicone, or urethane materials for potting, encapsulating, and bonding applications. Fixed-ratio, air-powered system includes positive-displacement meter with AirDraulic(TM) drive; 2 one-gallon, stainless steel material-holding tanks; foot-pedal actuator; and dispense-valve assembly with No-Flush(TM) mixers. Shot size of mixed...

Read More »
Limit Alarm uses TouchCAL(TM) microprocessor.

Limit Alarm uses TouchCAL(TM) microprocessor.

DIN-rail-mount Model WV118 accepts provides 2 selectable relay output functions and is powered by 9-30 Vdc. It is field configurable via DIP switches for 2- or 3-wire, Pt100 RTDs of either alphas of 0.00385 or 0.00392, as well as copper Cu10 RTDs. Dual relay alarm outputs can be set as high or low alarms to operate in failsafe or non-failsafe modes. TouchCAL(TM) technology enables 100% adjustment...

Read More »
Quarter-Turn Latches have modular design.
Fasteners & Hardware

Quarter-Turn Latches have modular design.

SOFTLINE Quarter-Turns offer both built-in finger-pull and traditional-opening option, compression of up to 6 mm via assortment of cams, and optional grounding clip. Polyamide housing allows user to combine basic components made of other materials, such as zinc die cast, with chrome or e-coated finishes, polyamide, or AISI 316 stainless steel to suit specific applications. Latches are available...

Read More »
Pumps/Drives offer delivery and dispensing.
Fluid & Gas Flow Equipment

Pumps/Drives offer delivery and dispensing.

IsmatecÂ-® peristaltic pumps and drives provide chemical resistance in contamination-free design. They include single- and multi-channel systems with up to 24 channels. Interchangeable pumpheads, bi-directional operation, and choice of variable or fixed-speed drives handle variety of fluids including viscous, foaming, corrosive, abrasive, and aggressive. Pumps can run dry for extended periods...

Read More »
Single Board Computer has -40 to +85-
Computer Hardware & Peripherals

Single Board Computer has -40 to +85-

Fanless EBC-C3 consists of one 733 MHz, EBX-sized board that runs WindowsÂ-® CE.NET, WindowsÂ-®XP embedded, Linux, and x86-compatible operating systems. Based on VIA Eden ESP7000 processor, unit offers VIA Padlock(TM) Data encryption engine and supports up to 512 MB of PC133 SDRAM in 168-pin socket. Features include 4X AGP flat panel/CRT video controller with onboard LVDS; 2 Intel 82551ER...

Read More »
Fluid & Gas Flow Equipment

Three-Way Poppet Valves suit various applications.

Inline poppet valves, offered in 3-way, 2 position, solenoid and air-actuated configurations, are available in port sizes from Â-½-2 in. NPT. Models include solenoid-actuated valves with internal air pilot, solenoid actuated valves with external air pilot supply, and valves with air actuation. Products operate with or without lubrication and offer bubble tight shut-off. Applications include...

Read More »
Multiplexer transmits 8 serial data channels over one fiber.
Communication Systems & Equipment

Multiplexer transmits 8 serial data channels over one fiber.

Environmentally ruggedized to meet NEMA TS-1/TS-2 requirements, plug-and-play D8000 Series fiber optic, 8-channel, full-duplex, serial data multiplexer can transmit up to 8 serial data signals over one or two multi-mode or single-mode optical fibers. Each channel may be independently configured for RS-232, RS-422, or RS-485 with 2 or 4-wire operation with tri-state. Single-mode version supports...

Read More »
Chip Resistors offer ohmic values of .1 ohm to 1,000 Gohm.
Electronic Components & Devices

Chip Resistors offer ohmic values of .1 ohm to 1,000 Gohm.

Thick film chip resistors, available in sizes from .030 x .020 in. to .250 x.120 in., have gold, platinum silver, and platinum silver with 62/36/2 solder coating terminations. Termination attachment methods include wire bonding, soldering, and epoxy bonding. Products are suited for instrumentation and calibration applications as well as high voltage regulation, power switching, RF and microwave...

Read More »

All Topics