Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Field Monitor offers local and remote operation.
Starmonitor model FM7004 automatically configures itself to work with StarProbe or battery-powered E or H field probes. Featuring displays and graphics that facilitate reading of unit, product can be locally or remotely operated from front panel controls or through provided IEEE 488.2, USB 2.0, or RS-232 interfaces.
Read More »
Field Monitor and Probes acquire readings down to .5 V/m.
Starprobe Laser Probe, model FL7004, incorporates sphere that measures more than 1 in. Able to sense and adapt to environmental conditions, laser-powered E-field probe employs detectors and antenna that aid performance in presence of harmonic distortion and provide isotropic response free of spikes. Noise reduction and temperature compensation allow for field readings down to .5 V/m. E or H Field...
Read More »
Custom Barcode Tags/Labels comply with 2005 Sunrise Date.
Produced with machine- and human-readable numbers, barcodes can be printed with consecutive or static digits. In addition to UPC, code 39, code 128, and interleaved 2 of 5 barcodes, company also produces codabar, ITF 14, EAN-8, and EAN-13 barcodes. Products, available in up to 8 colors, allow for any combination of 4-color process, spot colors, varnishes, and laminates. Finishing options include...
Read More »
Pneumatic Fittings are offered in food grade versions.
Offered in over 45 different shapes, Pneufit D series push-in fittings are suitable for compressed air applications and approved by FDA, WRAS, SK Zert, and NSF-51 for use in food processing. Parts incorporate integral stainless steel grab rings, which offer secure assembly for Nylon PU and PE tubing. Tube sizes are available from 4-12 mm and 5/32-Ã-½ in. Pneufit D can also be specified with...
Read More »Couplings promote clean chemical/solvent/fuel transfer.
Designed for transfer of hazardous materials, dry disconnect couplings facilitate connection and disconnection of hoses and pipelines while eliminating accidental spillage and product loss. They are available with stainless steel, aluminum, or brass construction in 1-4 in. sizes and feature built-in swivel. Design options include HastelloyÃ-® C276 internal parts, TeflonÃ-® bushings, and...
Read More »Flexible Epoxy resists thermal shock and vibration.
Duralco 4538 can be tailored to meet application requirement by varying mix ratio of resin to hardener, resulting in exact degree of flexibility needed. Product cures at room temperature, without odors, to provide thermal and mechanical shock resistance, adhesion to dissimilar substrates, and electrical and chemical resistance. Duralco 4538 will not gum up or soften at elevated temperatures and...
Read More »
Multimeter employs AutoTect(TM) and automatic backlight.
Clamp-type Model AC71 measures ac/dc volts, resistance, and continuity. AutoTect senses what type of measurement is being made when test leads are placed across measurement point. With no knob to turn, meter displays measured value along with associated unit icon. AutoTect employs lower input impedance to help determine ghost voltage or hard connection. Backlight sensor recognizes if ambient...
Read More »Magnetic Proxmity Sensors offer sensing range up to 70 mm.
Incorporating giant magnetoresistive technology, 3-wire dc Proximity Sensors detect magnets through all non-magnetizable materials. With switching frequencies of 5,000 Hz, polarity-independent units operate from -13 to 158Ã-
Read More »
Magnetically Coupled Root Pumps are maintenance-free.
Magnetic Root Pumps are statically sealed against atmosphere, eliminating rotating seals that wear and leak, as well as cross contamination and oil pollution. Ranging from 250-6,000 mÃ-³/hr, units are also hermetically sealed, resulting in negligible leak rate of less than 1 x 10-5 mbar l/sec. Pumps are suited for chemical plant, coating, semiconductor, research and development, metallurgy,...
Read More »Laser Scanners come with surface modeling software.
Used for packaging design, feature animation, or custom manufacturing, 3D scanner models LPX-1200 and LPX-250 come with plug-in that enables users to setup and run scanners with RhinocerosÃ-® surface modeling software. Rhino v3.0 can create, edit, analyze, and translate NURBS curves, surfaces, and solids in Windows and also supports polygon meshes and point clouds. LPX-1200 has 0.0039 in....
Read More »