Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
ROTA NCR Precision 6-Jaw Compensation Chuck
The clamping of thin-walled and easily deformed components can be difficult. SCHUNK offers the 6-jaw ROTA NCR from our lineup for this challenging clamping scenario; with standard chuck diameters ranging all the way from Ø165 to Ø1200mm, for large workpieces. The 6-jaw NCR chucks strengths lie in its 3 pairs of radially compensating jaws which more equally distribute the chuck clamp force about...
Read More »
Manual Bag and Box Printer can print on products up to 30 x 60 in. size.
Model 900-MBP Manual Bag and Box Printer offers flexographic single color print on 1 or 2 sides of products. Unit can print copies of logos, 1D & 2D bar codes, graphics, lot/date codes and ingredients/instructions. Product is designed for semi-automatic unstacking, transporting, identifying and restacking of knocked down corrugated cases.
Read More »
Manual Bag and Box Printer can print on products up to 30 x 60 in. size.
Model 900-MBP Manual Bag and Box Printer offers flexographic single color print on 1 or 2 sides of products. Unit can print copies of logos, 1D & 2D bar codes, graphics, lot/date codes and ingredients/instructions. Product is designed for semi-automatic unstacking, transporting, identifying and restacking of knocked down corrugated cases.
Read More »
Saelig's Comb Generators come in 3 and 3.5 oz.
Available in TBCG1 and TBCG2 models, TekBox TBCGx Comb Generators are used for testing radiated noise measurements. TBCG1 generator comes in 3.2 x 2.4 x 1.1 in. size and powered by 9V alkaline cell. With built-in dipole antenna, TBCG1 is used to emit vertically or horizontally-polarized signals and consumes current of 175mA. TBCG2 generator comes with N female input connector and N male output...
Read More »
Saelig's Comb Generators come in 3 and 3.5 oz.
Available in TBCG1 and TBCG2 models, TekBox TBCGx Comb Generators are used for testing radiated noise measurements. TBCG1 generator comes in 3.2 x 2.4 x 1.1 in. size and powered by 9V alkaline cell. With built-in dipole antenna, TBCG1 is used to emit vertically or horizontally-polarized signals and consumes current of 175mA. TBCG2 generator comes with N female input connector and N male output...
Read More »
Blind Hole Mount Cable Ties feature metal locking mechanism.
Blind Hold Mount Cable Ties are designed for threaded and non-threaded holes. Made of heat-stabilized PA66, units come with an inside or outside serrated cable tie or an offset cable tie. Suitable for elevated temperatures, the product is capable of affixing wire bundles and cables for blind hole applications. Cable ties come with optional nonmetallic material.
Read More »
Blind Hole Mount Cable Ties feature metal locking mechanism.
Blind Hold Mount Cable Ties are designed for threaded and non-threaded holes. Made of heat-stabilized PA66, units come with an inside or outside serrated cable tie or an offset cable tie. Suitable for elevated temperatures, the product is capable of affixing wire bundles and cables for blind hole applications. Cable ties come with optional nonmetallic material.
Read More »
Vector Network Analyzer offers 0.005dB RMS trace noise.
Featuring Quad RX four-receiver architecture, PicoVNA 106 Vector Network Analyzer captures 500 point 2-port S2P Touchstone file. Supporting isolation correction and unknown thru calibration methods, unit comes with dynamic range of 118dB at 10Hz and bandwidth of 140kHz. Embedded with Microsoft Windows-compatible software, product is suitable for 5G, IoT, radar, and tissue and materials imaging...
Read More »
Vector Network Analyzer offers 0.005dB RMS trace noise.
Featuring Quad RX four-receiver architecture, PicoVNA 106 Vector Network Analyzer captures 500 point 2-port S2P Touchstone file. Supporting isolation correction and unknown thru calibration methods, unit comes with dynamic range of 118dB at 10Hz and bandwidth of 140kHz. Embedded with Microsoft Windows-compatible software, product is suitable for 5G, IoT, radar, and tissue and materials imaging...
Read More »
40-Watt DC/DC Converter is RoHS compliant.
Featuring remote on/off, output trim and short circuit protection, TMF Series 40-Watt DC/DC Converter comes in 2 in. x 1 in. footprint. Operated in temperature range of -40 to +51°C, unit delivers single output of 3.3, 5, 12, 15 and 24VDC and dual outputs of ± 12 and ± 15VDC. Providing input voltages of 24VDC and 48VDC, product comes with thermal conductive potting compound.
Read More »