Aprima Medical Software, Inc
Carrollton, TX 75006
Share:

WORXSAW Compact Circular offers lightweight portability and ease of handling.
Designed for ease of handling, the WORXSAW® Compact Circular Saw is cordless, weighing 4.1 pounds with battery included. Inline grips with integrated safety trigger are ideal for comfortable, one-handed operation. Product features a 3-3/8 in., thin-kerf blade to reduce motor strain, a no-load speed of 2300 RPM, and a 1-11/16 in. depth-of-cut. Saw is suitable for quick, precise cuts on a wide...
Read More »
USB Cable Assemblies are designed for military environments.
Available in shielded and unshielded versions, Waterproof USB cable feature Type-A and Type-B connector combinations. Available with panel mount and feed through connector options, unit is designed for data networking in harsh environments. Cable assemblies ideal for military and avionics applications.
Read More »
USB Cable Assemblies are designed for military environments.
Available in shielded and unshielded versions, Waterproof USB cable feature Type-A and Type-B connector combinations. Available with panel mount and feed through connector options, unit is designed for data networking in harsh environments. Cable assemblies ideal for military and avionics applications.
Read More »
BES Q40 Inductive Sensors are designed for general factory automation.
Available with 2 meters of cable length and PNP Normally-Open output polarity, BES Q40 inductive sensors provide basic application solutions. Sensors IP 67 rating is suitable for dusty and wet environments, while customizable sensing area allows for flexible installation. Product comes in compact 40mm by 40mm block-style housing. Designed for general factory automation applications.
Read More »
BES Q40 Inductive Sensors are designed for general factory automation.
Available with 2 meters of cable length and PNP Normally-Open output polarity, BES Q40 inductive sensors provide basic application solutions. Sensors IP 67 rating is suitable for dusty and wet environments, while customizable sensing area allows for flexible installation. Product comes in compact 40mm by 40mm block-style housing. Designed for general factory automation applications.
Read More »
DURApulse GS4 Series AC Drives enhances standard GS drive features.
Available in 460V and 230V, GS4 Series AC Drives support both Modbus RTU and BACnet protocols and include built-in I/O with a wide range of input/output configurations. Fully functional PLC is capable of up to 10k ladder logic steps for drive-related logic requirements. Units have a 100kA Short Circuit Current Rating (SCCR), 50°C operating temperature rating, and STO (Safe Torque Off). Products...
Read More »
DURApulse GS4 Series AC Drives enhances standard GS drive features.
Available in 460V and 230V, GS4 Series AC Drives support both Modbus RTU and BACnet protocols and include built-in I/O with a wide range of input/output configurations. Fully functional PLC is capable of up to 10k ladder logic steps for drive-related logic requirements. Units have a 100kA Short Circuit Current Rating (SCCR), 50°C operating temperature rating, and STO (Safe Torque Off). Products...
Read More »
Single Cylinder Precrusher Series meet or exceed current ANSI Z245.2 safety standards.
Capable of crushing/compacting capacities upwards of 300 cu.yds/hour and compaction forces well over 160,000 lbs., the Precrusher Series PC-3001, PC-4001 and PC-6001 are designed for lighter duty compaction applications. Units are suitable for volume capacity ranging from 179 to 212 cubic yards in compaction mode, and from 135 to 179 cubic yards in pre-crusher mode. All models include up to 8...
Read More »
Single Cylinder Precrusher Series meet or exceed current ANSI Z245.2 safety standards.
Capable of crushing/compacting capacities upwards of 300 cu.yds/hour and compaction forces well over 160,000 lbs., the Precrusher Series PC-3001, PC-4001 and PC-6001 are designed for lighter duty compaction applications. Units are suitable for volume capacity ranging from 179 to 212 cubic yards in compaction mode, and from 135 to 179 cubic yards in pre-crusher mode. All models include up to 8...
Read More »
Doosan's DMP 500/2SP offers dual-spindle vertical machining.
Equipped with two spindles and two automatic-tool-change (ATC) systems, the DMP 500/2SP is capable of machining two parts simultaneously to reduce workload and setup time. Unit includes a W-axis adjustment of 20mm on right spindles to account for variability in fixture heights. Designed to produce high volume parts, product comes with standard12,000 RPM direct drive spindles with 87 lb ft of...
Read More »