Aeon Lighting Technology Inc
Taipei TWN
Share:
Clamping Cylinder loads and unloads light parts.
Twist Clamp has internal mechanism to produce rotary piston motion throughout stroke. By attaching clamp arm, actuator becomes clamping mechanism for light-duty holding applications. Motion rotates clamp arm out of work area for easy loading and unloading of parts. It uses 40mm bore cylinder that produces up to 224 lb of clamping force at maximum pressure of 140 psi. Cylinder body is hard coat...
Read More »Brazing Flux is fluoride-free.
Superior No 650 brazing flux is formulated for use with cadmium-free, silver alloy and gold alloy filler metals. It will not yield hydrofluoric acid or boron-trifluoride gases during brazing process, providing greater safety for mucous membranes and respiratory systems. Flux provides greater workplace and environmental safety for manufacturing plumbing assemblies, jewelry, refrigeration-A/C...
Read More »
Linear Bearings are made from 100% polymer.
DrylinÃ-® RJI inch and DrylinÃ-® RJM metric polymer linear bearings are directly interchangeable with standard re-circulating ball bearings, and fit into standard pillow blocks. Made from iglideÃ-® J material, bearings have low coefficient of friction and shock and vibration dampening, require no external lubrication, and resist corrosion and wear. They are available from stock in...
Read More »
Rollers And Bumpers include additional sizes.
Solid, finned, and DuraSoft(R) rollers are available with diameters from 1-1/2 to 4 in. diameter and widths of 1, 1-1/4, and 2 in. They come in black neoprene, white nitrile, or polyurethane in durometers from 20 to 95. They also offer standard bearing, precision bearing, shaft drive, and brake roll-clutch bearing mountings. Square and rectangular bumpers are available in black neoprene and...
Read More »
Cable Support System fits data and communication cables.
Flexible DataQik(R) has center spine support system with metal and nylon components. Three-sided metal spine comes in 8 ft lengths with connection holes for rungs and hardware spaced on all 3 sides. Spines can be ceiling attached, wall attached, ceiling suspended, or floor mounted beneath raised floors. Horizontal and vertical joiners are available that fasten to spine, allowing spine to be...
Read More »
Mobile Firefighting Rig uses halotron instead of halon.
Mounted on pickup bed or trailer, Halotron/I can be quickly moved to quench fires. It can also be mounted on skid to give on-site protection for aircraft hangars, offshore platforms, turbine/generator sets, and transformer vaults. Rig has 300 cu. ft cylinder carrying compressed argon and 460 lb Halotron-filled tank. In operation, pressurized argon spews out Halotron at 225 psi, effectively...
Read More »
Dustproof Motor locks out contamination.
Abrasive Dustproof Series, sealed with built-in o-rings, has air fittings for pressurization up to 15 psi. Shaft slinger prevents abrasive dust from attacking shaft seal material, which in turn prevents dust from entering bearing. Motor is available in standard 23, 34, 42 and 65 frame sizes. Applications include industrial operations that use, produce or process powdered materials such as fiber...
Read More »
Flame Retardant Fasteners meet aerospace standards.
Scotchmate(TM) reclosable polyester Series SJ3586FR and SJ3587FR meet Federal Aviation Administration's 60-sec and 12-sec vertical burn tests (FAR 25.853). Hook and loop interlocking can be opened and closed for access or frequent repositioning applications such as seat cushions, interior trim covers, and wall panels. Sound and vibration dampening helps reduce squeaks and rattles. Fasteners are...
Read More »
Reverse Expansion Insert presses into plastic hole.
Suitable for strengthening plastic joints, Series 18 brass reverse expansion insert is used in applications where bolt enters insert from headless end rather than from headed end. Its head provides high level pull-through resistance and its diamond knurl provides directional torque resistance for bolt installation. Unit does not require any specialized insertion tools, so it can be installed by...
Read More »
Netting is applied with hand wrappers or machines.
Tiger Net(TM) extruded plastic mesh netting wraps pallet shipments that require ventilation. Open-mesh design satisfies all handling and shipping requirements, while eliminating pressure points that can damage cartons and contents. Design also enables ventilation for cooling, heating, drying, ripening, and fumigating. Pre-stretched netting eliminates load shifting, and conforms to load shapes.
Read More »