Basware Corporation
Espoo FIN-02601 FIN
Share:
![Differential Manometer offers 0.1 resolution.](https://cfnewsads.thomasnet.com/images/medium/824/824891.jpg)
Engine-Driven Welder offers multi-process capabilities.
Offered in compact case, Vantage 500 PerkinsÃ-® is powered by 4-cylinder, 1,800 rpm turbo-charged diesel engine that meets EPA Tier 4i standards. Unit offers stick, TIG, MIG, flux-cored, and arc gouging mode, and can produce up to 12,000 W of continuous 1-phase ac generator power for common construction tools, while simultaneously welding at up to 250 A. With 20 gal fuel tank, unit offers 9...
Read More »![SMD Planar Transformer promotes output winding flexibility.](https://cfnewsads.thomasnet.com/images/medium/556/556881.jpg)
SMD Planar Transformer promotes output winding flexibility.
With footprint of 35 x 25 mm and profile under 10 mm, planar transformer component designed for battery input voltage (24-48 Vdc) handles power up to 200 W with natural cooling and 240 W with heatsink. It has switching frequency range of 100-300 kHz, efficiency of up to 99%, and leakage inductance of less than 300 nH. PCB layout design allows different input and output possibilities as well as...
Read More »Software helps businesses comply with duty legislation.
Duty Management 2009.1 International Trade and Customs solution lets companies delay payment of all Customs duties and VAT until latest possible time. Replacing existing paper forms, solution specifically enables users to comply with HM Revenue and Customs (HMRC) initiative to implement electronic Alcohol and Tobacco Warehouse Declarations. It also lets users hold Authorized Economic Operator...
Read More »![I-²C Switches/Multiplexers provide bus lockup detection.](https://cfnewsads.thomasnet.com/images/medium/824/824215.jpg)
I-²C Switches/Multiplexers provide bus lockup detection.
Capable of detecting, isolating, and notifying slave bus lockup conditions, 8-channel MAX7356/MAX7357/MAX7358 use integrated timer to monitor all extended buses, and allow one master to isolate and communicate with slaves that may otherwise have address conflicts. They are specified over -40 to +85Ã-
Read More »![Infrared Emitters provide high-pulse-current operation.](https://cfnewsads.thomasnet.com/images/medium/824/824453.jpg)
Infrared Emitters provide high-pulse-current operation.
Featuring 3.5 x 2.8 x 1.75 mm PLCC2 SMD package, VSMG2720 has viewing angle of Ã-
Read More »Portable Welder suits on-site welding applications.
Designed as dc stick welder and ac power generator, OutbackÃ-® 185 has smooth dc welding output of up to 185 A for welding steel, stainless steel, or cast iron, as well as hardfacing projects due to its ability to operate up to 5/32 in. stick electrode. It features front accessible engine control panels, 6.8 gal fuel tank, and Low-Lift(TM) grab bars that allow for lifting unit on and off...
Read More »![Linear Slide features integrated actuator/electronic drive.](https://cfnewsads.thomasnet.com/images/medium/556/556868.jpg)
Linear Slide features integrated actuator/electronic drive.
Kerk RGSÃ-® linear slide assembly features size 17 single or double stack Haydon(TM) MotoDrive(TM) PDE Actuator, programmable for microstepping from full step mode to 64 microsteps per full step and offering 200-12,800 steps/revolution. Device includes wear-compensating, antibacklash driven carriage to maximize positioning accuracy. All moving surfaces include KerkiteÃ-® high-performance...
Read More »![Drill/Drivers deliver 750 lb-in of torque.](https://cfnewsads.thomasnet.com/images/medium/556/556869.jpg)
Drill/Drivers deliver 750 lb-in of torque.
Powered by Cordless Power Care lithium-ion technology, SFH 18-A CPC Hammer Drill/Driver and SF 18-A CPC Drill/Driver are suited for drilling holes in masonry, stone, wood, and metal with variety of bits, as well as driving screws and lag bolts. Tools feature all-metal gearing and offer speeds up to 2,140 rpm. Ultramide glass-fiber reinforced housing helps protect against drops, while electronic...
Read More »![Extrusion Tooling is used to manufacture large wall piping.](https://cfnewsads.thomasnet.com/images/medium/556/556867.jpg)
Extrusion Tooling is used to manufacture large wall piping.
Featuring combined die and reservoir system that promotes even material distribution and product consistency, Model 2030 eliminates extrusion issues associated with inconsistent material flow during manufacture of large wall piping (4-20 in. dia) used for oil, gas, and water applications. Co-extrusion capability enables simultaneous extrusion of multi-materials or multi-stripes, and flow analysis...
Read More »