Teggo Software Ltd.
Roseau Valley DMA
Share:
Software features interleaved toolpath.
FeatureCAM delivers Interleaved Spiral toolpath that uses single pass technique for finishing complex surfaces. Toolpath intelligently applies spiral cutting passes that are interleaved between Z levels based on desired scallop height and shape of part. FeatureCAM analyzes slope and shape of part surfaces and then uses scallop height constraint to calculate whether spiraling passes are needed...
Read More »SIM Solution lets users access data over public WLAN.
GEMobileIT is comprised of software, smart card with SIM card and enterprise security functions, and smart card reader. It authenticates WLAN user to network operator and provides secure, remote access to corporate network and data. Package provides connection over public hotspots by linking into GSM infrastructure, stores corporate credentials to authenticate end-users to Virtual Private Network...
Read More »
Coil Roofing Nailer weighs only 4.9 lb.
Magnesium-framed, BostitchÃ-® RN46 delivers 410 lb-in. of driving power at 100 psi. Lockout feature prevents cycling nailer when out of fasteners. Positive stop depth adjustment allows user to set proper nail depth for variety of roofing materials and helps prevent overdrives. Accommodating 1 to 1Ã-¾ in. x .120 coil roofing nails, pneumatic nailer features tool-less shingle guide and...
Read More »
Hacksaw offers blade change ability with pre-tensioning.
FatMaxÃ-® High Tension Hacksaw features adjustable thumb-dial tension mechanism that provides tension memory and one-piece design that permits tension settings up to 330 lb. Power load sliding tension mechanism increases leverage and provides greater control when releasing blade, while 24 tpi, bi-metal blade allows for flush cutting with 4.75 in. depth cutting capacity. Die-cast, slope-nosed...
Read More »
Air Preparation Units withstand harsh environments.
Available in 3 body sizes, D-Series Air Preparation Units feature optimized internal flow paths that enable flow capacities from 24-406 scfm, depending on style and size. Products are offered in inch and metric series with port sizes from 1/8-1 in. NPT and G 1/8-1 ISO. Made of zinc and aluminum, die-cast units incorporate polycarbonate filter bowels and metal bowl guards. Filtration levels are...
Read More »
Saw has abrasion-resistant, friction-reducing coating.
Available in 15 and 20 in. sizes, FatMaxÃ-® Saw with SharpTooth(TM) design includes Blade Armor(TM) composite coating, which provides abrasion and corrosion protection. Features include induction-hardened teeth and handle with ergonomically designed, slip-resistant grip for comfort and control. Saw is suited for cutting wet and immature wood, plasterboard, large timbers, and other abrasive...
Read More »
Fault Detector provides diagnostics for CPX Valve Terminal.
Handheld programming device for CPX Valve Terminal enables users to carry out parameter settings, configurations, and diagnostics for module and channel-oriented faults. No programming is required, and no additional software is neeeded. Unit provides clear-text display for commissioning, status display, and search for current faults. Find function identifies causes of sporadic faults using...
Read More »
Hand Benders can be used in air or on floor.
Made of heat-treated aluminum, BIG BEN(TM) hand benders incorporate dual sight-line system that allows bending on floor or in air. They include highlighted Benfield(TM) markings and are available in sizes of Ã-½, Ã-¾, and 1 in. Other features include Vise-Mate(TM) conduit vise; bend-back channel that corrects over-bends; Benfield-style, 30Ã-
Read More »
Synchro to Digital Converters have no external components.
Measuring 1.12 x 2.12 x .4 in., transformer isolated converter modules mount on PCBs and track input rates up to 600 RPS with no added error. They convert Synchro or Resolver inputs 50 Hz to 5 KHz to 10-16 bit parallel binary output, representing angle with accuracy up to 2 arc min. No external transformers or components are required. Velocity and fault outputs are standard. Digital outputs are...
Read More »
Software inspects and measures parts.
CAM2 Measure v4.0 features user interface that shares common look and feel with FARO Gage Software. Measurement commands include Torus, Torus Segment, Rectangular Toroid, and Extruded Rectangle. Tubing functionality enables users to measure bends of 180Ã-
Read More »