Purple Labs
11, Avenue du Lac de Constance, BP350
Le Bourget du Lac 73375 FRA
Share:
Single Board Computer has dual processors, dual Ethernet.
LBC family of PCI/ISA single board computer has dual 1.26G Hz Intel Pentium III processors, 133 MHz system bus, up to 2 GB SDRAM, dual 10 Base-T/100 Base TX Ethernet controllers, and dual channel UDMA/33 IDE support. It also has USB ports, serial/parallel ports, floppy interface and a PCI SVGA CRT controller with 2 MB of SDRAM memory. It is based on ServerWorks ServerSet III LE chipset and...
Read More »Debur Cell automates deburring and chamfering.
S 450/750 DBC Gear Debur Cell eliminates need to manually debur and chamfer gears through use of FANUC 6-axis servo-driven robot and programmable controller. Cell can be programmed to perform both top and bottom tooth and root gear deburring and chamfering geometry. Model S 450/750 DBC is available in two sizes: 2 in. through-hole with 18 in. dia, and 4 in. through-hole with 30 in. dia.
Read More »Text Message Displays include 24 K unit memory.
HG1X Series text message displays includes 2 models: HG1X-252 with 16-character, 2-line backlit LCD and 6 function keys; and HG1X-452 with 20-character, 4-line backlit LCD with 8 function keys and numeric keypad. Compatible with PLCs, they draw power from communications ports and have serial ports for printing screens and alarms. Each function key is user-definable; multiple actions can be...
Read More »Vision Software works with 2D cutting machines
Vision Plus integrated software supports straight or bevel cutting with oxyfuel, plasma, waterjet and laser, plus all current marking devices, in numerous combinations. Users can cut interior geometry with waterjet, laser or precision plasma, then switch to plasma for outside perimeter cut by selecting icons. It allows bevel parts to be programmed in seconds. Software automatically programs...
Read More »NFPA Stainless Steel Tie-Rod Cylinders are pre-lubed.
SS series requires no additional lubrication. Standard 250 psi pneumatic and optional 400 psi non-shock hydraulic cylinders are available with single or double rod end, oversized rods and 1-1/2 to 8 in. bore sizes. Non-rotating SS-NR series has 1-1/2 to 8 in. bores. SS-MSE/MSR versions are available in 2, 3 and 4-stage force multiplying models. Both 125 psi pneumatic and low-pressure hydraulic...
Read More »Tie-rod Cylinder features a no-pinch point design.
Micro-Adjust NFPA Tie-Rod Cylinder features calibrated stop collar that allows for precise adjustment of extended stroke. Once adjusted, collar can be locked in place and offers precision scale and 0.001 in. calibration. Standard bore sizes range from 1-1/2 in. to 8 in. with up to 6 in. stroke and adjustment, and various standard NFPA mounts.
Read More »Cart combines cart and ladder in one unit.
Reach & RollÃ-® Cart features 2-step ladder with non-skid surface that conforms to OSHA and ANSI design guidelines. Spring-loaded steps have skid-resistant rubber feet to prevent cart from moving while user stands on ladder. Steps are 16-1/2 in. wide for stability. Welded frame consists of 1 in. square tubing coated with corrosion and abrasion resistant baked-on epoxy. Cart transports loads...
Read More »Printer works well in tough environments.
A300 SE Ink Jet Printer incorporates IP66 protection making it suitable for environments with high levels of dust, vapor or sugar. Automatic sensors ensure that printer will operate when systems are functioning to protect it from particles in the air. Stainless steel cabinet features pressurization system that protects technology from airborne contaminants.
Read More »Multiplexers are designed for digital measuring systems.
ProMUX Multiplexers are available in 3 models: ProMUX-3, with 3 inputs and 1 RS232 output; ProMUX-4 and -8 with either 4 or 8 inputs and 1 RS232 or RS422 output; and ProMUX-RF with 1 input and 2-way wireless transmission to receiver with RS232 output. ProMUX-3 and ProMUX-RF are ideal for multiplexing and sending SPC data to PC. ProMUX-4 and ProMUX-8 can be cascaded to provide up to 128 channels...
Read More »Software uses true solid modeling technology.
NCL/IPV (In Process Verification) interactively simulates, verifies and displays metal removal process of NC tool paths as they are being created. Cut model can be viewed from any orientation, cross sectioned, inspected and compared to existing solid model. NCL Computer-Aided Manufacturing software package generates simultaneous 2 through 5-axis NC tool paths and provides parametric 3D modeling.
Read More »