Comptel Corporation

Lapinrinne 3
Helsinki FI-00100 FIN

Punching Machine has -

TRUMATIC 2010 Rotation offers hydraulic punching head; all-tool, 360 degree rotation; brush tables; and 50 x 50 in. working range. ToPs Light CAD/CAM software lets users create programs offline or at machine. Through use of Multitool punching tools, number of available tools can be expanded up to 100. Stroke rates are 2,200/min for marking/beading and 900/min for punching (at 0.040 in. pitch)....

Test & Measurement

Digital Tachometer measures by contact and non-contact.

Model PLT-5000 pocket tachometer measures up to 100,000 rpm. For non-contact sensing, it uses laser to measure rpm at distances up to 5 ft from target. For contact sensing, it uses adapter for measurements on shafts or journals up to 10,000 rpm. Instrument also measures length in m, ft, yards and in., and speed in m/min, fpm, yards/min, and ipm. Up to 14 readings are stored in memory, including...

Software

Firmware suits precision motion control applications.

Ultrasonic Motor Special Firmware lets company use Nanomotion's LS2 ultrasonic motors in its motion control systems. Anti-friction bias alleviates problems when motor stops and power is removed, while deadband capture and 2 sets of PID filters aid in point-to-point control. Firmware holds motor in vibration free mode. Its intuitive, 2-letter commands facilitate ease of programming.

Electronic Components & Devices

Trimmer Capacitors suit RF circuitry applications.

FILMTRIM(R) plastic dielectric trimmer capacitors offer 4 capacitance ranges from 0.5 to 4.5 pF through 1 to 20 pF. Devices measure 6.8 x 5.4 x 2.6 mm, and use PTFE film. Quality factor (Q) is greater than 1000 when measured at 10 MHz, and operating temperature is -25 degrees to 85 degrees C. Offering moisture resistance, plastic film trimmers are suitable for flow and reflow soldering....

Electronic Components & Devices

EMI/RFI Power Filters utilize intelligent circuitry.

EMI/RFI power filters with current ratings to 75 Amps work in 48 volt and 60 volt applications. They feature turn on/turn off window, overvoltage protection, and short-circuit protection (transient protection is also available). Specific applications include telephone switching equipment, UPS, power supplies, industrial controls and welders, and servers.

Mechanical Power Transmission

Speed Reducers withstand corrosive environments.

All-Stainless Steel Speed Reducers, with horsepower ranges through 5 HP, are available in frame sizes 918, 921, and 926 with quill-type 56C, 140TC, and 180TC NEMA C-face inputs. Construction consists of 304 cast stainless steel housings, covers, and shafts; stainless steel hardware; O-ring sealed C-face; and Mobile SHC 634 synthetic lubrication. Pressure compensation chamber prevents internal...

Machinery & Machining Tools

Splicing/Ironing Machines have in- or off-line designs.

Opti-Splice(TM) 1000 & 2000 machines utilize ultrasonic energy to splice (1000 series) then iron (2000 series) material to form continuous runs of fabric that accommodates any width. Ironing creates smooth, unobtrusive joint that increases seam strength. Portable and self-contained, equipment can be used on multiple lines for end-to-end web splicing. Both Opti-Splice(TM) 1000 and Opti-Splice(TM)...

Health, Medical, & Dental Supplies and Equipment

Hygro-Thermometer-Anemometer tests indoor air quality.

Model HTA30, with optional static pressure range from -5.00 to +5.00 kPu, measures humidity from 2 to 98% RH, temperature from 32 to 140 deg F, and air velocity from 20 to 6000 ft/min. It has both RS232 data link and single-selectable analog output. Probe can be replaced without recalibration. Model HTA30 is designed for HVAC, indoor air quality and industrial health industry.

Cable Testers comply fully with ISO standards.

LANTEK(R) 7, compliant with Category 7/ISO F standards, certifies up to 750 MHz, while LANTEK(R) 6, compliant with Category 6/ISO E standards, has frequency range up to 350 MHz. Both have high definition 1/4 VGA color display; PCMCIA slot for compact flash storage; USB port for quick uploading to PC; advanced user interface. Fiber accessories available include signal loss, length, and delay...

Electrical Equipment & Systems

Power Relay is compact alternative for many 2-pole uses.

276 Series relay comes in SPST, SPDT, DPST, and DPDT contact configurations and is rated at 35 A, 250 Vac, 50 Hz for both UL and IEC codes (SEMKO) and all contact configurations (NO and NC). Coil voltages of 6-125 Vdc are available. Relay has molded coils for heat dissipation and resistance to dust and moisture; barrier-type 0.250 in. quick-connect terminals; plastic dust covers with flange...