Comptel Corporation

Lapinrinne 3
Helsinki FI-00100 FIN

Wire Feeder suits automated applications.

Digitally-controlled Power Feed(TM) 10R, part of modular, multi-process welding system, mounts to robot arm or can be used for hard automation. Four drive roll wire feeder operates on 40 Vdc input power, and features split wire guide that aligns and supports wire through feeding system. Brass-to-brass connections allow optimum connectivity between feeder and gun. Unit is capable of MIG, pulsed...

Portable Tools

Torque Wrench targets assembly environments.

Electronic, 300 lb-ft hand torque wrench offers low-level analog input capability and is compatible with strain gage instruments and data collectors. It can be used by QC inspectors and technicians seeking to verify that proper torque has been applied to fastener. Wrench is 28 in. long with comfortable foam handgrips, and is suited for light and large truck and off-highway vehicle assembly...

Electrical Equipment & Systems

Stainless Steel Motors withstand washdown environments.

WashguardÃ-® SST(TM) range from 1/3 to 2 hp and 1,750 and 3,450 rpm. All external surfaces such as frames, endbells, mounting base, fan guard, hardware, conduit box, and cover are 300 series stainless steel. Oversized, double-sealed bearings are pre-lubricated with moisture-resistant high-temperature grease. Stainless steel T-drains are provided for drainage of condensation while preventing...

Agricultural & Farming Products

Welder/Power Generator provides 10,000 W peak power.

Ranger(TM) 10,000 allows operators to simultaneously weld and use AC generator power. At 100% duty cycle, machine is rated 225 A for AC Stick welding, 210 A for DC Stick welding, and 200 A for CV wire welding. Full KVA 120/240 V outlet allows operators to run high-capacity motors, while four 120 V outlets provide auxiliary power. Unit is available with KohlerÃ-® or HondaÃ-® 2-cylinder,...

Welding Equipment & Supplies

Welding Electrodes suit pipe welding environment.

Pipeliner(TM) Welding Consumables are available for stick, MIG, flux-cored, and submerged arc welding. All are lot-controlled and lot-tested with certified test results. Electrodes are packaged in moisture-resistant containers for consistent performance regardless of welding environment.

Mechanical Components and Assemblies

Mini Diaphragm Seal eliminates clogging.

AshcroftÃ-® Type 330 Seal features 316L stainless steel top housing and diaphragm, and all-welded construction, which prevents leakage of process media. Diaphragm is flush with end of 1 in. male NPT process connection, eliminating any pocket or dead-leg. Unit is compatible with switches, transducers, digital gauges, or analog pressure gauges from 60-1,000 psi. Diaphragm can be easily cleaned,...

Machinery & Machining Tools

Assembly Press suits quality test labs and plant floor.

Great White stand-alone, CNC electro-mechanical assembly press has built-in, on-board force and distance sensors and offers 27,000 lb capacity. Encoder-equipped servo motor drives ball-screw ram with intelligence to accept signals from external sensors and gages. Press can simultaneously monitor and control force and position, as well as take in other external sensor information. It operates on...

Fluid & Gas Flow Equipment

Desiccant Breathers remove moisture and particulate.

WatchdogÃ-® particle filtration and water removal systems prevent contaminants from entering equipment as air is breathed in and out due to thermal expansion or fluid level changes. Designed to replace vent caps on gearboxes, reservoirs, and storage tanks, they feature visual indication of silica for replacement by turning from gold to dark green. Allowing only clean, dry air into industrial...

Spinner Hanger cleans odd-shaped work pieces.

TrublastÃ-® Spinner Hanger provides deflashing, descaling, peening, profiling, and surface cleaning of parts that can not be adapted to table or tumble machines. Parts rotate at 22 rpm during blast cycle and are cleaned from multiple angles. Unit supports max load weight of 500 lb/hook and max work envelope of 24 in. dia x 24 in. high. After being thrown by wheel, abrasive media is returned...

Abrasive Blast Machine cleans die castings off-line.

WheelabratorÃ-® Rotary Mesh Table Machine has 3/8 in. thick, manganese steel blast chamber and multiple vestibule seals for abrasive containment. Castings are loaded onto 20 in. wide wire mesh table and rotated through blast on 48 in. pass line, exposing parts to top and bottom-mounted blast wheels. Four bi-directional, alloy blast wheels are single sided with twelve 2Ã-½ in. wide blades...