VeriFone Holdings, Inc.
Paris 75010 FRA
Share:
Paramagnetic Oxygen Transmitter provides oxidation control.
Series 2200 includes control unit, EX control unit, and oxygen transmitter. Control unit works with 1 to 6 oxygen transmitters, and is certified for use in hazardous areas. Digital communications are enabled with Modbus protocol provided. EX control unit has above features but is also certified for EX hazardous areas. Transmitter provides intrinsically safe, linear, 4 to 20 mA analog output and...
Read More »
Reed Switch measures only 5 mm.
Model RI-80 5.0 mm reed switch is suitable for size-restricted sensor applications in medical electronics such as pacemakers, endoscopes, and hearing aids, as well as miniature industrial position sensors and small signal automatic test equipment. It also works in laptops, PDAs, mobile phones, and battery operated applications where no external power supply is available.
Read More »
Air Compressor connects to direct gear motor.
30-40-50 DG industrial electric-driven rotary screw air compressor is available in 30-50 hp models that are directly coupled to motor for positive alignment. It is equipped with air pressure gauge, hour meter, discharge temperature gauge, oil filter, and separator element differential gauges. Discharge pipe is steel braided flexible pipe. Large air intake has oversize multi-stage dry type...
Read More »
Sensor Box Line is available in 3- or 4-pole versions.
SAI line includes fieldbus active components for Profibus DP, ASI Interface, and CAN Open. Features include bus and power connections through cable glands or metric M23 and M12 (coded B, PB) connections. Distributor base module is available as 4- or 8-channel M12 unit with IP68 or NEMA 6P rating or with IDC quick-fit technology for IP67 or NEMA 6 rating. M12 technology is available as 4- or...
Read More »
Oxygen Controller handles gas streams.
EOC Extractive Oxygen Controller measures and controls oxygen concentrations at ppm levels, in normal or highly acidic environments, such as gas streams. Because sensor element is modular, system has long service life. Replacement of core sensing element is less than 1/3 cost of new probe. Installation requires two simple steps: attach power and piping. It is highly reliable, provides...
Read More »
Washers are available up to 12 in. diameter.
Washers come in short, medium, and long runs in all sizes between 0.080 and 12.000 in. They are offered in low carbon sheet steel, 5 types of spring steel, stainless steel, aluminum, brass, copper, and nickel silver. Non-metallic materials such as Delrin(R), Teflon(R), Mylar(R), and nylon are also available.
Read More »Power System fits telecommunications applications.
X482 telecom power distribution solution fits in 1U chassis, yet distributes up to 900 A. It allows up to 20 circuit breakers to be mounted in 19 or 23 in. racks. Power fed to system input is divided into branch circuits that include protection for individual loads. Circuit breakers have plug-in terminals to permit swapability and front access, and are available in ratings from 100 mA to 50 A at...
Read More »
Control Cable works in harsh environments.
OLFLEX(R) 190 multi-conductor control cable works in CNC machining centers, grinding machines, bottling equipment, or any application requiring flexibility, durability, abrasion, and notch resistance. UL approved and CSA certified, cable resists mineral oils, synthetic oils, and water-based coolants. It has oil-resistant insulation and jacket that passes requirements of VDE 0472 Section 803....
Read More »
Current Transducer offers closed loop control.
DCSA Series loop powered, linear output current transformer provides output directly proportional to RMS AC current passing through external LCSC10T12 toroidal sensor. It provides either analog current or voltage: 4 to 20 mA, 1 to 5 Vdc, or 2 to 10 Vdc. Each unit is factory calibrated for monitoring (with LCSC10T12) 0 to 5, 0 to 10, 0 to 20, or 0 to 50 A. Transducer senses current draw on...
Read More »
ANSI Pumps handle dirty and reclaim process fluids.
Stan-Cor Series non-metallic centrifugal pumps are suited for pumping abrasive and corrosive process fluids. They provide total dynamic head to 350 ft and flow rates to 700 GPM. Solid Kynar or Teflon(R) pump head provides chemical compatibility and abrasion resistance. They are equipped with concentric casing designs, heavy-duty drive shaft, and duplex contact thrust bearings.
Read More »