Acunetix

11th Floor Portomaso Tower
Portomaso PTM 01 MLT

Auto Darkening Filter has 3 operation shadings.

NexGen EQC auto-darkening filter uses digital and analog controls with an LCD display telling mode of operation, welding shade and sensitivity adjustment. All controls are protected from interior helmet work environments. Its lens utilizes four-sensor design, and gives steady filtering protection without flickering down to low welds of less than 5 A. NexGen allows users to work in variable shade...

Fluid & Gas Flow Equipment

Ball Valves are used for clean-in-place applications.

Actuated Ball Valves are constructed of thermoplastics and feature trunnion design to withstand CIP processes. Shafts are strengthened with stainless steel rod. Teflon seats are energized with O-rings, and no metal parts are exposed to process liquid. Actuators are available with electric or pneumatic operation. Both are built from corrosion-resistant thermoplastics and are water and dust-tight...

Agricultural & Farming Products

Lift Trucks provide vibration-free power.

CatÃ-® 8,000-11,000 lb capacity lift trucks feature pneumatic tires, and are offered with gas, LP gas and diesel engine configurations. Cabs include contoured seats and flexible operator restraint systems as well as open-step frames. Tilt steering column is adjustable within a 12Ã-

Sensors, Monitors & Transducers

Proximity Sensors ignore ferrous materials.

NF Series non-ferrous barrel style proximity sensors are used in applications where non-ferrous targets need to be sensed and ferrous material needs to be ignored. Stoneface(TM) front face is made of thermoset plastic developed for resistance to weld slag, scratching, pitting and abrasion. Sensors are available in 12 mm, 18 mm and 30 mm dia bodies with NPN (sinking) or PNP (sourcing) normally...

Laser Sensor comes in M18 compatible housing.

User selectable for Light Operate or Dark Operate, model 7708 Class 2 laser sensor may be connected for NPN or PNP output with an adjustable 8-turn intensity control. Proximity mode detects small objects at 12 in., and Reflective mode offers distances to 160 ft. Connection is via sealed, 4-pin Pico-style connectors. The visible laser beam features spot size of less than 1 mm at 2 ft.

Photoelectric Sensors are designed for small area sensing.

T8 Series ultra-miniature 10 to 30 Vdc photoelectric sensors are 0.64 in. in diameter and offer sensing ranges of 79 in. in opposed mode and either 2 in. or 4 in. in diffuse sensing mode. Users can choose NPN (sinking) or PNP (sourcing) outputs, capable of switching up to 50 mA load. Sensors feature ABS sealed housing as well as protective circuitry for reverse-polarity and transient voltages,...

Cleaning Products & Equipment

Flap Disc combines two abrasive grains.

TwinFiber(TM) Type 29 flap disc combines ceramic seeded-gel and zirconia alumina abrasives for use on stainless and carbon steels. Blending of 2 abrasives onto Y-weight cotton backing produces disc that works with less pressure. Type 29 angled face and conical shape allows operators to grind at 10Ã-

Electrical Equipment & Systems

Cord Sets extend, then snap back.

Retractile cords are coiled in helical shape that allows cord to extend to 4:1 or 5:1 ratio. A 48 in. cord, for example, will extend to 20 ft. To maintain integrity in harsh environments they are constructed with thermoset rubber jacket that is waterproof and resistant to pinching, abrasion, oils, greases, chemicals, ozone and sunlight. Cords are available in SOW and SJOW configurations with 2 to...

Fluorescent Lamps can replace T12 tubes.

ULTRA 5000(TM) F40T10 Fluorescent Lamps can produce 15% higher lumen output of clean, natural daylight color in comparison to T12 fluorescent lamps. They are available in 4 ft, with 40 W and 5000K color temperature. Suitable for critical lighting applications, T10s feature color rendering index of 90. Manufactured with cathode guards, darkening around end of bulb is minimized throughout its...

Agricultural & Farming Products

Cutting Machine features monolithic column design.

PHOENIX-® II 275 HC CNC Bevel Gear Cutting Machine is designed to machine gears with pitch diameters up to 275 mm. While it can accommodate wet cutting processes, it is well-suited for dry machining. Cutter spindle and work spindle are mounted directly to column, and cutter spindle pivots to create root angle, rather than mounting workspindle on rotating base. Machine includes direct-drive...