KYOCERA Corporation
Kyoto 612-8501 JPN
Share:
Coatings reduce application and labor costs.
ExpressTech(TM) coatings provide fast throughput, fast return to service, fast stack times in fabrication shops, and lower VOC emissions. Fast Clad Zinc inorganically reinforced primer can be recoated in 2 to 3 hr. Reinforced film resists topcoat bubbling, dry spray and mudcracking. FasTop Urethane floor system offers a 6-8 hr return to service. Envirolastic Polyurea can be returned to service in...
Read More »![Pushbutton Switch mounts in 22.5 mm round hole.](https://cfnewsads.thomasnet.com/images/medium/116/11605.jpg)
Pushbutton Switch mounts in 22.5 mm round hole.
Dual Lighted Pushbutton is available in momentary action with independent lighted indicator. It features green and red lenses and comes with international ON/OFF legends or with no legends. Actuator meets NEMA 4 and 13 and IP65 requirements, and switch contacts are rated 10 A at 660 Vac. Pushbutton meet UL, CSA, and other international approvals.
Read More »![Electro-Mechanical Relays feature 40 A switching current.](https://cfnewsads.thomasnet.com/images/medium/116/11606.jpg)
Electro-Mechanical Relays feature 40 A switching current.
HD-1 Relays are rated for 40 A @ 240 Vac/30 Vdc, 1 hp @ 120 Vac, and 2 hp @ 240 Vac. They offer 9600 VA (ac)/1200 W (dc) max switching power in normally-open version. Suited for equipment with motors that constantly cycle on/off, relays are available in PCB, TMP, and panel mount styles with SPST (1-Form-A), SPST-NC (1-Form-B), and SPDT (1-Form-C) contact configurations. They provide 1 x 107...
Read More »![Protective Packaging features cold-seal coating.](https://cfnewsads.thomasnet.com/images/medium/115/11597.jpg)
Protective Packaging features cold-seal coating.
Microfoam-® Cohesive Packaging has coating that seals to itself to instantly form highly protective package. It consists of closed-cell polypropylene foam in nominal thickness of 1/16 or 1/32 in., with layer of polyethylene film, kraft paper or linerboard laminated to foam. Because cohesive seal is destroyed when contents are opened, both structures offer tamper-evidence.
Read More »![Vibration Amplifier is programmable.](https://cfnewsads.thomasnet.com/images/medium/115/11599.jpg)
Vibration Amplifier is programmable.
Microprocessor-based Model 6634C conditions and displays vibration data from rotating machinery. It accepts inputs from single-ended differential piezoelectric or IsotronicÃ-® accelerometers, velocity coils, or remote charge converters. Full-scale ac and dc output ranges are programmable to represent acceleration, velocity, or displacement. Programming is via front panel keyboard or optional...
Read More »![Drive Assembly automatically adjusts tool head stroke.](https://cfnewsads.thomasnet.com/images/medium/115/11594.jpg)
Drive Assembly automatically adjusts tool head stroke.
Linear Drive Assembly requires no programming and has mechanically triggered controls. As system operates, ratchet lever is actuated when linear drive passes by, causing end stops to automatically move apart or together in increments relative to dialed-in value. Rolling ring drive in assembly runs on smooth shaft and provides up to 800 lbs of axial trust. Travel speed is up to 13 ft/sec at...
Read More »![Coveralls keep user cool and comfortable.](https://cfnewsads.thomasnet.com/images/medium/115/11595.jpg)
Coveralls keep user cool and comfortable.
Polypropylene Coveralls provide protection from non-hazardous dirt, grime, and other dry particulates. Fabric is lightweight and breathable for comfort. Coveralls are suitable for use in construction sites, manufacturing facilities, food processing plants, and maintenance clean-up. They are not for use in asbestos/lead abatement. Available sizes include M, L, XL, 2X, and 3X.
Read More »![Automatic Cutter cuts wide range of materials.](https://cfnewsads.thomasnet.com/images/medium/115/11596.jpg)
Automatic Cutter cuts wide range of materials.
MMC100 cuts round or flat material up to 3.94 in. wide and .63 in. thick. It is microprocessor-controlled and can be programmed to cut any length with 1% or better tolerance. Programmable for up to 10 batches and 3 fixed feed rates, MMC100 is rated to cut up to 7,200, four in. pieces/hr. With max cutting force of 600 lbs, it can cut copper wire and cable, silver solder, power cords, cellophane,...
Read More »![Inspection Stations reduce neck, back, and eye strain.](https://cfnewsads.thomasnet.com/images/medium/115/11588.jpg)
Inspection Stations reduce neck, back, and eye strain.
IS-3N and IS-3L Ergonomic video inspection stations permit upright seating and eye-level observation via video monitor or computer when inspecting small parts through microscope. IS-3N offers variable magnification up to 450x; IS-3L offers variable magnification up to 230x. CCD camera, lens, and white LED are built into microscopes. Camera captures 270,000 pixels of full color. Options include...
Read More »![Mist System supresses dust in open air sites.](https://cfnewsads.thomasnet.com/images/medium/115/11589.jpg)
Mist System supresses dust in open air sites.
Fog Cannon(TM) provides jet of air, water, and additive mist to provide dust control over bulk material handling sites such as stockpiles, reclaims, railcar dumps, and blasting sites. Fan and plug-free nozzles propel 77 to 110 micron particles in mist that agglomerates airborne solids and prevents escape of fugitive dust. Depending on model, it projects mist up to 800 ft, suppressing dust in...
Read More »