Whitehouse Scientific
Chester CH3 7PB GBR
Share:
Vision Software works with 2D cutting machines
Vision Plus integrated software supports straight or bevel cutting with oxyfuel, plasma, waterjet and laser, plus all current marking devices, in numerous combinations. Users can cut interior geometry with waterjet, laser or precision plasma, then switch to plasma for outside perimeter cut by selecting icons. It allows bevel parts to be programmed in seconds. Software automatically programs...
Read More »
NFPA Stainless Steel Tie-Rod Cylinders are pre-lubed.
SS series requires no additional lubrication. Standard 250 psi pneumatic and optional 400 psi non-shock hydraulic cylinders are available with single or double rod end, oversized rods and 1-1/2 to 8 in. bore sizes. Non-rotating SS-NR series has 1-1/2 to 8 in. bores. SS-MSE/MSR versions are available in 2, 3 and 4-stage force multiplying models. Both 125 psi pneumatic and low-pressure hydraulic...
Read More »
Tie-rod Cylinder features a no-pinch point design.
Micro-Adjust NFPA Tie-Rod Cylinder features calibrated stop collar that allows for precise adjustment of extended stroke. Once adjusted, collar can be locked in place and offers precision scale and 0.001 in. calibration. Standard bore sizes range from 1-1/2 in. to 8 in. with up to 6 in. stroke and adjustment, and various standard NFPA mounts.
Read More »
Cart combines cart and ladder in one unit.
Reach & RollÃ-® Cart features 2-step ladder with non-skid surface that conforms to OSHA and ANSI design guidelines. Spring-loaded steps have skid-resistant rubber feet to prevent cart from moving while user stands on ladder. Steps are 16-1/2 in. wide for stability. Welded frame consists of 1 in. square tubing coated with corrosion and abrasion resistant baked-on epoxy. Cart transports loads...
Read More »
Printer works well in tough environments.
A300 SE Ink Jet Printer incorporates IP66 protection making it suitable for environments with high levels of dust, vapor or sugar. Automatic sensors ensure that printer will operate when systems are functioning to protect it from particles in the air. Stainless steel cabinet features pressurization system that protects technology from airborne contaminants.
Read More »
Multiplexers are designed for digital measuring systems.
ProMUX Multiplexers are available in 3 models: ProMUX-3, with 3 inputs and 1 RS232 output; ProMUX-4 and -8 with either 4 or 8 inputs and 1 RS232 or RS422 output; and ProMUX-RF with 1 input and 2-way wireless transmission to receiver with RS232 output. ProMUX-3 and ProMUX-RF are ideal for multiplexing and sending SPC data to PC. ProMUX-4 and ProMUX-8 can be cascaded to provide up to 128 channels...
Read More »
Software uses true solid modeling technology.
NCL/IPV (In Process Verification) interactively simulates, verifies and displays metal removal process of NC tool paths as they are being created. Cut model can be viewed from any orientation, cross sectioned, inspected and compared to existing solid model. NCL Computer-Aided Manufacturing software package generates simultaneous 2 through 5-axis NC tool paths and provides parametric 3D modeling.
Read More »
Development Kit complies with PICMG 2.16 specification.
PICMGÃ-® 2.16 Ethernet Packet Switching Development Kit consists of 9-slot tower with 8-slot PICMG 2.16 Ethernet Packet Switching backplane, which has mix of PICMG 2.16 node slots and standard CompactPCI slots. Kit includes provisions for CD ROM drive, hard drive and floppy drive; provisions for 80 mm rear plug-in modules and transition modules; embedded 300 W ATX power supply; and push/pull...
Read More »
Outdoor Light fits on top of posts.
Decorative Design ZAV-24 post-top luminaires emit visually interesting combination of glare-free ambient area lighting for outdoor commercial and institutional environments, corporate and university grounds, public parks, and retail and hospitality sites. Cylindrical lamphead has vandal-resistant solid metal ends and die-cast rectangular openings above the canopy. These lend a design aesthetic...
Read More »
Case Sealer features continuous operation design.
Model 336 hot melt adhesive case sealer is available with elevation ranging from 15 in. to 26 in. It features metering belt transfer that automatically times cases into flap tucker at speeds up to 45 cases per minute. Sealer tucks minor flaps, applies adhesive and plows major flaps closed. Rapid adjust hand cranks allow machine to accommodate case sizes from 8 in. long x 6 in. wide x 4 in. high...
Read More »