|
|
Advertisement
|
Tempco Electric Heater Corporation
Designs and Manufactures Heating Elements, Temperature Sensors and Controls, and Turnkey Process Heating Systems. Thousands of products including accessory items are available from stock. Request our 864 page Visionary Solution catalog for product and engineering information.
|
|
|
Thermal & Heating Equipment ->
Heaters ->
Other
Other
(Showing headlines 1 - 20) more ....
|
 MEMS Micro Hot Plates suit chemical sensor applications.Kebaili Corporation
Irvine, CA 92616
Jul 03, 2008
Featuring platinum resistive thin-film microheater attached between freestanding thin-film silicon nitride and silicon dioxide membranes, KMHP-100 MEMS microhotplate can operate continuously at up to 650°C. It consists of micromachined silicon die attached to gold-plated TO-18 package, which insures stable operation in harsh/hostile environment. Freestanding thin-film silicon nitride membrane thermally/electrically isolates platinum microheater from silicon substrate microstructure.
|
 Clear Heaters deliver heat while transmitting light.Minco Products, Inc.
Minneapolis, MN 55432 3177
Jun 27, 2008
Featuring micro-thin, etched foil or wire-wound elements sandwiched in between optical-grade polyester sheets, Thermal-Clear(TM) Heaters provide uniform or profiled heat patterns without blocking light. Units can integrate temperature sensors, flex circuits, controllers, or other electronics to provide total heating solution. Available in sizes up to 280 x 560 mm, heaters are RoHS-compliant and suitable for heating LCDs, cockpit displays, outdoor card readers, and portable military radios.
|
Unit Heater is built with explosion-proof design.INDEECO
St. Louis, MO 63144
Jun 20, 2008
In addition to T3C, 320°F ignition temperature code rating, ULTRA-SAFE(TM) EXP features dual over-temperature protection with automatic and manual reset over-temperature cutouts. Product uses non-toxic propylene glycol heat transfer fluid and has 70 psig relief valve setting. Three available corrosive-resistant construction options are available for use in dry, non-corrosive areas; wastewater treatment plants; and chemical plants where chlorides are present.
|
Electric Process Heater offers 4,160 V operation.Gaumer Process Heaters
Houston, TX 77040
Jun 20, 2008
Available in capacities of 9 kW to 13 MW with flange sizes of 3-24 in., 4kV Series(TM) electric process heater can be located away from its power source, such as 1 mile below grade for any down-hole oil production heater. It also enables multi-megawatt heating applications for heating and vaporizing water, steam, ammonia, and glycol. Unit is based on INFI-SEAL(TM) technology, which seals heating elements so they exhibit resistance to ground and do not absorb or retain moisture.
|
 Induction Light Fixture suits hazardous environments.EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Apr 03, 2008
Rated for NEC Class I Division 2 locations, 165 W Mercmaster(TM) III delivers 100,000 hours of virtually maintenance-free operation. Unit features corrosion-resistant materials and operates safely in temperatures down to -50°C. Mercmaster(TM) III is suitable for industrial, chemical processing, and refining operations where flammable gases and vapors are present, as well as non-hazardous locations subject to extreme weather and excessive dirt and moisture.
|
Preheater enables soldering at lower operating temperatures.OK International
Garden Grove, CA 92841
Mar 28, 2008
PCT-1000 Programmable Preheater is benchtop system delivering forced convection heat that can be controlled with 4 time and temperature zones and additional cooling zone. External thermocouple input can be used for control of output temperature based on board or component temperature and also as process monitor. Designed to create convection vortex, system can be operated in manual or programmable automatic mode where up to 50 thermal profiles can be stored.
|
Electric IR Spot Heater warms commercial decks and patios.Radiant Optics, Inc.
Woodinville, WA 98072
Feb 06, 2008
Designed for commercial and residential deck and patio applications, HZE X5C 015 series has curved back design and compound reflective IRLens(TM) that focuses IR energy into central beam. Unit requires 1,500 W of electric power at 120-277 V and will raise temperature of people and objects in 14 ft˛ area by 15° or more from 8 ft away. Heater can be wall-, ceiling- or post-mounted.
|
Automatic Fill System features integrated adhesive melter.Nordson Corp., Packaging Systems
Duluth, GA 30097
Jan 15, 2008
Combining melter and adhesive feed system, ProBlueŽ Fulfill(TM) System automatically maintains desired adhesive levels in melter tanks. Integrated capacitance sensor detects low adhesive levels and transmits signal to suction lance. Using vacuum, system conveys adhesive as pellets, pastilles, and mini-slats from supplied closed adhesive storage container directly to melter tank. Adding small quantities of adhesive at regular intervals prevents sealed tank from running dry.
|
Nozzle Heater is suited for hot runner systems.Watlow
St. Louis, MO 63146
Jan 11, 2008
THERMASLEEVE(TM) Hot Runner Nozzle Heater comes with rapid thermal response that allows heat to be created precisely where it is needed. Designed to have intimate contact with surface of nozzle which optimizes heat transfer, it features laser structuring to create customized temperature profile. Self-clamping electric heater can be installed and removed from nozzle with custom installation and removal tool, and accommodates thermocouple secured to external body of heater.
|
 Compact Heaters utilize ceramic PTC technology.Spectrum Sensors & Controls, Inc.,
Grass Valley, CA 95945
Jan 08, 2008
With rated power output to 1,500 W, PTC Heaters can accommodate wide array of self-regulating PTC thermistor elements, which operate at nearly constant temperature over range of voltage and environmental conditions. Heaters require no thermostat and have virtually unlimited life with no moving parts. Applications include space heaters, CCTV cameras, mat/cushion heaters, telecommunications equipment, and vehicle/windshield heaters.
|
 Indirect Heating Systems offer clean heat to workspaces.Munters Moisture Control Services
Orlando, FL 32837
Dec 13, 2007
Self-contained models HD-7.5 and HD-3, along with process air blower that allows for single-point power and duct connections, integrate indirect fired heat exchanger designed to keep products of combustion and moisture separate from conditioned air. Both feature adjustable air flow and safe control of outlet temperature. HD-7.5 has 100°F temperature rise at 8000 SCFM with high temperature limit of 230°. HD-3 has 100°F temperature rise at 2500 CFM with high temperature limit of 179°.
|
Bulk Melt Systems include performance enhancing parts.Graco Inc.
Minneapolis, MN 55440
Dec 03, 2007
Designed for quiet operation and optimal process efficiency, Therm-O-Flow 20 and 200 incorporate NXT(TM) Air Motor, Mega-Flo(TM) platen, and sensors that signal when drum changes are needed. EasyKey(TM) control displays actual and set point temperatures, and material totalizer can be reset to track material usage. Along with 7-day automatic startup timer, systems feature self-diagnostics support, which allows for predictive and preventative maintenance strategies.
|
 Adhesive Melters deliver optimized flexibility and control.Nordson Corp., Packaging Systems
Duluth, GA 30097
Nov 08, 2007
Suited for product assembly, packaging, and paperboard converting operations, AltaBlue(TM) TT melters use variable-speed ac motors with spur gear pumps and process range of materials. All-electric solutions, used in manual, semi-automatic, and automatic applications, have TeflonŽ-coated tube tank that eliminates dead corners and minimizes adhesive char. To facilitate operation, features include status-at-a-glance indicators and 7-day clock.
|
 Waste Oil Heaters range from 155,000 to 500,000 btu.Landa Water Cleaning Systems
Camas, WA 98607
Oct 24, 2007
Offering alternative to disposing of used oil, Waste Oil Heaters come in 4 models with integrated air compressor that produces clean, dry air and eliminates need for shop air plumbing. Multi-directional air louvers give user ability to direct heat where they need it, while swing-out removable burner enables access for cleaning and maintenance.
|
 Waste Oil Heaters range from 155,000-500,000 BTU.Hotsy
Camas, WA 98607
Oct 15, 2007
Offering alternative to waste-oil disposal, Waste Oil Heaters are equipped with optimized waste oil supply pump for consistent, trouble-free operation. Three out of 4 models include on-board air compressor. Providing clean combustion, heaters have dual, multi-directional air outlets, swing-out removable burner for cleaning and maintenance, and blower motors ranging from .75-3.6 hp.
|
 Zero Clearance Heaters install in concealed spaces.Marley Engineered Products
Bennettsville, SC 29512
Oct 05, 2007
Rated at 2,500 W, Models PHFP25 and CHPR25 are designed for installation in concealed spaces including crawl spaces, plenum spaces, and areas between finished ceilings and drop ceilings. They include thermostat range of 40-90°F; enclosed, permanently lubricated fan motors; and fan-delay feature, which eliminates cold-air circulation at start-up. Measuring 14 x 12 in., heaters are crafted from 18 ga steel and protected from corrosion by gray, polyester powder-coat finish.
|
 Heater Modules use thick film technology.Watlow
St. Louis, MO 63146
Oct 04, 2007
Suited for semiconductor wet chemistry applications, Thick Film Quartz Heater Modules feature optical trip that protects heater from excessive boiling, non-contact dry fire, and insufficient fluid flowing through heater. Thick film avoids permeability problems experienced with Teflon-coated products by utilizing semiconductor-grade quartz. Intended for deionized water and aggressive chemicals, modules enable glassware fluid pressures up to 75 psi.
|
 Programmable Heater features explosionproof design.Intertec Instrumentation
Milton, ON L9T5A6
Aug 30, 2007
Suited for hazardous areas, Programmable Smart Heater can be fitted with elements capable of outputs from 500 W to 2 kW, making it suited for applications up to 300°F. It includes digital PID controller, as well as RS485 serial networking interface for programming and to network heater to PC for monitoring and diagnostic purposes. Approved for worldwide use by IEC, ATEX, GOST, and CSA, heater is suited for applications in chemical/petrochem, oil and gas plants.
|
Melters promote efficient reactive adhesive processing.Nordson Corp., Packaging Systems
Duluth, GA 30097
Aug 17, 2007
PURBlue(TM) EC melters facilitate use of reactive polyurethane (PUR) adhesives. Components in contact with PUR adhesive - tank, grid, reservoir, and pump block - can be dismantled to aid cleaning process, while pump shutoff valves and quick-disconnect heater and sensor cables facilitate maintenance. Tank accommodates 39.68 lb adhesive slugs measuring 11 in. in diameter, and inert gas blanket protects adhesive from moisture to prevent premature curing.
|
 Top-Side Preheater helps improve selective soldering.ACE Production Technologies
Spokane Valley, WA 99216
Aug 09, 2007
Used as primary preheating function or in combination with ACE discrete preheaters to maintain board temperature during soldering operation, real-time preheating module applies heat to top side of PCB. For high-mass assemblies, unit promotes draw of solder through barrel to top side of board, enhancing formation of solder fillets. Optical pyrometer reads actual PCB temperature with real-time closed loop control.
|
(Showing headlines 1 - 20) more ....
|
|
|