Xilinx, Inc.
San Jose, CA 95124 3400
Jun 10, 2008 Programmable Xilinx 3GPP LTE Turbo Encoder and Decoder LogiCORE(TM) offerings deliver throughput speeds to 200 Mbps with embedded DSP capabilities of Spartan® and Virtex® FPGAs to meet voice and data communications demands of long-term evolution (LTE) standard. Along with complete interleaver function, decoder features full 3GPP LTE block size range, dynamically selectable number of iterations (1-15), and 2/4/8 processing units with intelligent scheduler function.

Kistler Instrument Corp.
Amherst, NY 14228 2119
Jun 10, 2008 Used whenever crank angle is needed for calculating combustion analysis parameters, Crank Angle Encoder Set Type 2614A enables measurement of cold starting in test vehicles and on low-temperature test stands. Sensor offers resolution of 0.5° CA at LVDS output, while processor offers resolution down to 0.1° CA and second angle mark signal with 1° resolution, for engine control.

TURCK, Inc.
Plymouth, MN 55441
Jun 04, 2008 Supplied in die-cast housings with 12-bit analog and 14-bit CANopen outputs, Sendix® magnetic encoders feature IP 69k protection rating, are resistant to humidity and condensation, and are suitable for outdoor use. Non-contact devices have 36 mm dia and use Sensor-Protect(TM) technology, where electronics are fully encapsulated and mechanical assembly is separated for shock resistance in excess of 500 g and vibration resistance over 30 g. Various parameters are programmable via bus.

austriamicrosystems AG
Schloss Premstaetten A 8141  Austria
May 20, 2008 Qualified to AEC-Q100, AS5134 Rotary Encoder IC supports commutation of brushless DC motors in ambient temperatures up to 150°C. With 8.5-bit resolution, unit can recognize 360 positions within one 360° turn and is accessible with serial or PWM interface. Device features 3 programmable incremental outputs and 1-6 pole pairs. Housed in SSOP-20 package, IC offers power saving mode with power consumption of less than 1.5 mA and start-up time of less than 250 µs.

Dynapar
Gurnee, IL 60031
May 19, 2008 Suited for use on NEMA 23 and 34 brushless servo and step motors, HC20 features direct-read non-interpolated technology that stems from custom-phased array ASIC, and is available with 5-26 Vdc operating range. Temperature rating of 120°C will not limit motor performance, allowing manufacturers to keep from de-rating torque specs. Capable of up to 2,500 ppr, encoder is available with commutation tracks for 4, 6, or 8 pole variants of brushless motors.

Baumer Ltd.
Southington, CT 06489 1534
May 16, 2008 EcoSpin Magnetic Encoder is modular, non-contact sensor system that delivers reliable performance in dirty, contaminated, and high vibration operating environments. With depth of 10 mm, IP67-rated encoder contains no moving parts and includes spacer strip mounted between magnetic ring and sensor, simplifying installation and adjustment. Device can measure rotational speed of spindles, shafts, rollers, and webs as well as measure angle of cuts made with high-vibration machinery.

Advantech Automation Corp.
Cincinnati, OH 45240
May 14, 2008 Designed for use with ADAM-5550 series PACs, ADAM-5081 features 2,500 Vdc isolation, high-speed frequency mode (5 Hz to 1 MHz), and counter code at 1 MHz. Digital filter eliminates noise and interference (1-65,000 µsec), ensuring accurate data collection and transmission, and 4 counter modes are available. Along with 4 digital output channels, solution offers frequency mode that supports up to 8 channels and can control range of electromagnetic wave status under certain conditions.

Bourns, Inc.
Riverside, CA 92507 2129
May 06, 2008 With -40 to +125°C operating temperature range, EMS22 non-contacting rotary magnetic encoders can operate with either +5.0 or +3.3 Vdc supply voltage, with capability of rotating up to 10,000 rpm while maintaining code accuracy. They feature austriamicrosystems® Hall Effect ASSP to produce 4 distinct waveforms including quadrature, direction/step, absolute, and pulse-width modulation. RoHS compliant units are available in 3 different mechanical configurations.

Elma Electronic Inc.
Fremont, CA 94538
May 01, 2008 With dual concentric inner shaft and outer pole, Type E37 acts as 2 encoders. Unit comes with or without integrated push button and has metal housing and shaft. It features optional IP68 front panel sealing and operating range of -40 to +85°C. Available with 16 or 32 detents in standard resolution, encoder offers tactile feedback so user can change channels or frequencies in precise intervals, without looking at switch indicator.

Media Excel, Inc.
Austin, TX 78759
Apr 21, 2008 HERA 4000 Series hardware encoder/transcoder offers real-time simultaneous video delivery to any mobile device, PC, or TV over any network, performing file transcoding conversions at real-time speed. It supports multi-device broadcast delivery, converting any content for any device such as Live IPTV, MobileTV, or WebTV. Featuring 8 MPEG2 SD channels to 8 H.264 SD IPTV transcoding and 8 SDI SD channels encoding, unit is offered in single 1U appliance.

Celesco Transducer Products, Inc.
Chatsworth, CA 91311
Apr 18, 2008 CH25 is industry-standard Size 25 incremental rotary encoder with 2½ in. square flange and 3/8 in. dia shaft. Weighing 10.5 oz, it is constructed with rugged all-aluminum powder-coated enclosure rated to IP67 environments. Electrical connections are made using M12 connector and device includes push-pull output driver and quadrature signal format. It handles input voltages from 5-30 Vdc and available resolution range is 100-5,000 pulses/turn.

TURCK, Inc.
Plymouth, MN 55441
Apr 17, 2008 With 12-bit analog and 14-bit CANopen outputs, Sendix® encoders use Sensor-Protect(TM) technology to deliver fully encapsulated electronics and separated mechanical assembly, providing high resistance to shock (rated to 500 G) and vibration (rated to 30 G). Featuring die-cast housings, IP 69k rated single-turn magnetic absolute encoders are also resistant to humidity and condensation. Non-contact devices measure 36 mm in dia and operate over -40 to 85°C temperature range.

SICK STEGMANN, INC.
Dayton, OH 45413
Mar 19, 2008 Suited for use in dirty or dusty environments with water washdown cleansing, VFS 60 Motor Feedback Systems come with single point of potential access. Hollow shaft encoders feature nickel code disc that facilitates operation in harsh industrial environments and tolerance to temperatures as high as 100ºC. They are IP65 rated and deliver from 1-10,000 ppr in industry-standard 60 mm housing. Ball bearings that support encoder shaft are spaced 30 mm apart to ensure concentricity.

Micronor
Newbury Park, CA 91320
Mar 18, 2008 Ruggedized with greater than 500 g shock and 30 g vibration resistance, ENA361M (hollow shaft) and ESA361M (solid shaft) series single-turn absolute encoders provide 12-bit resolution and can be used in outdoor applications over -40 to +85°C range. Products are offered with choice of 4-20 mA or 0-10 V output and measuring range options of 45, 90, 180, or 360 deg. Protected against humidity and condensation, IP67-sealed units (IP69K optional) operate from 18-30 Vdc input.

Quantum Devices, Inc.
Barneveld, WI 53507
Mar 07, 2008 At less than 1 in. high, model SC12 provides feedback solution for applications typically using modular encoders. Short-circuit-proof and reverse polarity-tolerant outputs consist of quadrature sine/cosine pair with index pulse and 3-phase commutation. Each unit is individually calibrated to compensate for normal construction variances, and output levels are stabilized due to source tracking of sensor supply. Solution also provides 30° of rotation for commutation timing.

BEI Industrial Encoder Division
Goleta, CA 93117
Feb 27, 2008 Able to supply simultaneous position feedback to 2 separate systems, HS35 combines heavy-duty features into through-shaft style for use as winch-turns counter in drawworks system of oil rigs. Mechanically parallel and electrically isolated connectors facilitate connection and cable routing. Outputs can have different resolutions with use of interpolation. Features include hard-anodized metal housing, sealed connector, IS rating, dual bearings, and NEMA 4/13 shaft seals.

Dynapar
Gurnee, IL 60031
Feb 22, 2008 By using magnet to generate electronic signal, Acuro(TM) XR offers optimal resistance to shock and vibration. Oversized bearings enable mechanical life of up to 10⁹ revolutions under simultaneous axial and radial shaft loads of 200 N, and labyrinth seals around 10 or 12 mm shaft and housing protect against liquid ingress to IP69k. Communication options include synchronous serial interface or bi-directional synchronous serial interface, CAN Open industrial bus, and analog output.

SICK STEGMANN, INC.
Dayton, OH 45413
Feb 19, 2008 Designed for use in dirty/dusty environments with water washdown cleansing, Model DFS 60 reduces potential for contamination by dust, dirt, or water, delivers from 1-65,536 ppr, and operates in temperatures ranging from -20 to 100°C. Available with TTL or HTL interface, it features nickel code disc that supports operation in heavy duty industrial applications. Radial/axial cable outlet reduces installation depth and allows single encoder type to be used for various applications.

Elma Electronic Inc.
Fremont, CA 94538
Feb 07, 2008 Designed for rugged applications, Model E27 metal encoder features vertical orientation, 6 Ncm torque integrated pushbutton, 1.5 Ncm rotational torque, metal threaded bushing, internal O-ring for water ingress to IP65, and standard D-shaped aluminum shaft. Various options and customizations of shafts, housings, and switching schemes are also available.

Dynapar
Gurnee, IL 60031
Jan 29, 2008 Measuring 37 mm diameter and operating up to 120°C, Acuro(TM) AD34 and AD35 Series utilizes OptoASIC engine for absolute positioning and speed feedback up to 10,000 rpm. Units are available with unbreakable Mylar code disc capable of up to 17 bits of single-turn resolution. They can provide fully digital position data over BiSS interface with variable clock rate up to 10 MHz. Integrated diagnostic system controls and regulates data signals within encoders.