Linear Encoder works with fiber optic splicing machines.

Linear Encoder works with fiber optic splicing machines.

RGH25F non-contact linear encoder with cut-to-length scale and low-mass readhead provides resolutions from 5 microns to 10 nm for accurate fiber positioning. It works at speeds to 300 mm/sec to keep up with quick-moving, multi-axis fiber optic splicing, joining, and bonding devices. Its self-adhesive gold-plated steel tape scale is easy to install. Filter optics provide immunity to dust,...

Read More »
Absolute Encoders can be flange or servo mounted.

Absolute Encoders can be flange or servo mounted.

Model 925 Single Turn Absolute Encoder is housed in size 25 (2.5 in.) case with optional IP 66 sealing. Model 958 Single Turn Absolute Encoder is offered in European-standard size 58 (58 mm) housing. Each unit provides digital absolute positioning output, and is suitable for use in applications with especially high presence of noise or where absolute positioning information is needed even when...

Read More »
Electronic Module cleans up encoder signals.

Electronic Module cleans up encoder signals.

Anti-Dither Module can be placed between encoder and receiving electronics. DIN rail mountable device compares quadrature outputs from encoder, removes errors caused by mechanical vibration, and gives true picture of system output. Applications include web processes, conveyors, in-line inspection stations, and heavy equipment.

Read More »

Rotary Encoder suits tight constraint applications.

MOD 700 is comprised of LED and OptoASIC configured into small caliper, offering resolutions as high as 2,540 PPR. Opto-ASIC phased array photo diode IC features high tolerance for axial movement (+/- 0.010 in.) and power consumption of 40 mA. Standard stainless steel code disk offers range of standard optical radii, from .375 to .860 in. MOD 700 can be surface mounted onto PCBs or installed onto...

Read More »
Measuring Wheels work with encoders to measure linear motion.

Measuring Wheels work with encoders to measure linear motion.

Measuring Wheels are available in 6 in., 12 in., 1/3 meter, 200mm, 300mm, 400mm, and 500mm with choice of rubber or knurled aluminum contact surfaces. Cube Series Accu-Coder(TM) encoders with dual shafts work well in measuring wheel applications, since putting measuring wheel on each shaft results in twice the traction and improves bearing load by leveling radial pressure.

Read More »
Linear Actuator is available with encoder.

Linear Actuator is available with encoder.

Size 17 hybrid linear actuator, with optical incremental encoder, is suitable for both high and low volume motion control applications. Encoder is offered in resolutions ranging from 50 to 1,024 counts, and is available with TTL level and quadrature outputs. It incorporates lensed LED light source and monolithic photodetector array with signal shaping electronics to produce 2-channel bounceless...

Read More »
Encoder/Resolvers provide range of output types.

Encoder/Resolvers provide range of output types.

Snaptrak Series absolute encoder/resolvers are shaft angle position sensors that provide BCD, Binary, Greycode, Incremental, +5V TTL or 24 Volt Logic type outputs. DC Snaptrak Series provides +/-10 Vdc, 0-10 and 4-20 mA current loop outputs proportionate to absolute shaft angle. Encoder/resolvers are available in heavy duty NEMA 12 and flange mounted versions. Six wire cable is over 1000 ft long...

Read More »
Linear Encoder is accurate over 100 mm stroke.

Linear Encoder is accurate over 100 mm stroke.

Long Stroke encoder has accuracy better than 1 micron with resolution of 0.05 micron. Signals from probe interface electronics are digital and easy to interface with PC/PLC or digital readouts. Unit is CE marked comes with calibration certificate in mm or inches. Applications include industrial and scientific tasks.

Read More »
Modular Encoder requires no calibration.

Modular Encoder requires no calibration.

Accu-Coder(TM) Model 121 Self-Centering Modular Encoder has all-metal construction that will not warp or deflect. It requires no gapping or special tools to install. User simply tightens shaft clamp and installs mounting screws. Model 121 is available with up to 12-pole commutation, or with extended temperature range up to 100 deg C.

Read More »
Incremental Encoder handles high shaft loads.

Incremental Encoder handles high shaft loads.

HD20-S31 has 3 bearings that enable high axial and radial shaft loading, while sustaining speeds of 5000 rpm. Maximum radial shaft loading is 70 lb and maximum axial shaft loading is 80 lb. Encoder is suitable for applications where belt pulleys or other load-producing hardware are attached directly to encoder shaft. Encoder provides 10 to 2500 pulses per revolution with line driver or open...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics