|
|
|
Test & Measuring Instruments ->
Instrumentation I & O Devices ->
Data Acquisition Cards & Modules
Data Acquisition Cards & Modules
(Showing headlines 21 - 40) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
|
Data Acquisition Module features parallel design.GAO Instruments Inc.,
Toronto Canada
Jun 05, 2009
Designed for embedded use as standard PC104 card, data acquisition module features 12-bit analog-to-digital resolution with 8 single ended inputs ranging from 40 mV to 40 V. It comes with 2 independent programmable gain channels and has sampling rate from 1 k to 20 m with low inter-channel phase difference of less than 1°. Module offers selectable/adjustable manual, external/internal triggering modes on conditions of rising and falling edge.
|
Data Acquisition Board is hot pluggable.GAO Instruments Inc.,
Toronto Canada
Jun 05, 2009
Designed for field use, 4512UE 500 k, 12 bit multi-point data acquisition board is integrated with 16-channel parallel synchronous acquisition and can be expanded to 256 fully synchronized channels. It includes pre-panel that displays acquisition state of channels and post-panel that provides cascading interface for instruments. Unit provides switchable manual, external, and internal triggering modes with adjustable triggering levels.
|
 Phase Monitor utilizes data acquisition package.Supercritical Fluid Technologies, Inc.
Newark, DE 19711
Jun 02, 2009
Designed to determine solubility of various compounds and mixtures of compounds in subcritical and supercritical fluids, SFT Phase Monitor II uses Data Acquisition Package to provide real-time image and data capture directly to PC. Video image, along with temperature and pressure data, is displayed on PC monitor and may be archived directly to hard drive. Current date and time are also recorded and user has ability to enter short text comment.
|
 Optical Repeater Module is designed for WCDMA networks.GAO Tek Inc.
Toronto M1B2K4 Canada
Jun 02, 2009
Offered with 9.6 and 19.2 kbit/sec data rates for selection, RF module monitors and controls optical output power, LD bias current, received optical power, input and output RF signal power of Master, received FSK signal power and RF Gain control through MCU. Features included are linear analog PD with high sensitivity and high power DFB laser, low noise, linear RF amplifier, as well as built-in Bi-Di components and FSK monitor.
|
 USB DAQ Devices measure temperature and voltage.Measurement Computing Corp.
Norton, MA 02766
May 22, 2009
Offering 500 Vdc min isolation between field wiring and USB interface, USB-2416 Series features up to 32 single-ended (16 differential) analog inputs with 24-bit resolution and 9 programmable voltage ranges. Each channel can be configured for voltage or thermocouples, and these multifunction measurement modules feature built-in cold-junction compensation and open thermocouple detection. They also have 8 DIO lines, two 32-bit counters, and 1,000 S/s aggregate throughput.
|
 DAQ/Reporting System is offered with Modbus interface.Logic Beach
La Mesa, CA 91942
May 21, 2009
IntelliLogger(TM) data logging and alarming instrument samples connected analog, digital, and Modbus inputs; processes them; and stores results to internal or CF Card memory for reporting over Internet and/or downloading. While logging, alarm conditions can be detected, and appropriate action - turning on integral output relay or emailing/texting alert message - can be initiated. Programmable solution also includes Web page server for remote monitoring/management.
|
 Remote Access/Monitoring System uses cellular networks.SIXNET
Clifton Park, NY 12065 0767
May 21, 2009
R.A.M.(Remote Access and Monitoring) unit allows data logging and SCADA operations to be monitored/controlled from remote locations anywhere via existing cellular networks. It provides secure cellular data connectivity, programmable RTU functionality, and includes Open Source Linux OS along with application tools for alarming, data logging, and programmable control. With 26 I/O points and 5 Ethernet, 1 RS485, and 2 RS232 ports, it operates on 120-240 Vac in temperatures from -40 to +65ºC.
|
 Portable Data Acquisition Board offers multi-point data acquisition.GAO Instruments Inc.,
Toronto Canada
May 21, 2009
With ability to provide manual, external and internal triggering modes for switching, 4512U 100K-12bit-16CH portable data acquisition board suits application in field data acquisition, parallel data acquisition for more channels and time-phase sensitive acquisition. Device comes with 16-channel parallel synchronous acquisition and can be expanded to 256 full synchronized channels. Pre-panel displays acquisition state of channels while post-panel offers cascading interface of instruments.
|
Waveform Digitizer offers high-speed DAQ for various systems.Guzik Technical Enterprises
Mountain View, CA 95134
May 21, 2009
Featuring up to 2 Gpoint waveform memory on each channel, WDM 5044 Waveform Digitizer provides 4 GHz bandwidth in 4-channel mode and 6 GHz bandwidth in 2-channel mode. Unit is designed in displayless rack-mount format, incorporates FPGA-based processing engine, and utilizes high-speed PCI Express cabled interface. It includes Matlab drivers as well as WDM 5000 Signal Explorer software utility providing control, display, and waveform export capability.
|
Data Acquisition Software supports PSI's pressure scanners.Pacific Instruments, Inc.
Concord, CA 94520
May 20, 2009
Fully supporting Pressure Systems, Inc. (PSI) pressure scanners used in aerospace applications, PI660 Data Acquisition Software provides for definition of Calibration Valve Modes, Calibration Stabilization Times, and up to 5 calibration pressure levels per unit. One operator workstation performs setup, calibration, control, and acquisition for pressure scanners and Series 6000 DAQ System, which acquires strain, acceleration, position, discrete, frequency, and temperature measurements.
|
Data Processing System analyzes large volumes of data.HBM, Inc.
Marlborough, MA 01752 3014
May 18, 2009
Able to handle file formats from software packages such as MTS RPC3, DIAdem, Excel, or MATLAB, nCode GlyphXE(TM) lets measured data be evaluated after acquisition - irrespective of measurement software used. Analysis processes can be developed graphically, without programming knowledge, and data processing modes can be saved to produce results and reports with one click during subsequent measurements. System also offers predefined functions for time, frequency, and statistical analyses.
|
Encoder Module offers 8-channel simultaneous input/decoding.Measurement Computing Corp.
Norton, MA 02766
May 18, 2009
High-performance USB-QUAD08 DAQ device provides simultaneous input and decoding for up to 9 incremental quadrature encoders at resolutions up to 48-bits. Counters, with indicator LEDs, support differential and single-ended inputs and feature multiple programmable counting modes. Unit incorporate detachable screw terminals and 37-pin D-sub connector. Universal Library(TM), programming libraries, and drivers for many Windows-based programming languages are included.
|
 Handheld Data Collector can store up to 9,000 reads.Videx, Inc.
Corvallis, OR 97330
May 14, 2009
Measuring 2¾ in. in length, and weighing less than 2 oz, iBR9000(TM) provides audible tone and flashes LED light on reading iButton successfully. Collector stores button's ID, contact date and time in its memory, when it comes in contact with iButton. Featuring high-impact fiberglass-reinforced nylon case and SS read head, product suits applications in documenting security patrols, and hazardous waste and fire safety inspections.
|
 USB DAQ Modules are used to characterize and test devices.Measurement Computing Corp.
Norton, MA 02766
Apr 28, 2009
Featuring 8 DIO lines and two 32-bit counters, USB-2416 and USB-2416-4AO are 24-bit, analog input devices for voltage or temperature. Latter model also has 4 analog outputs with 16-bit resolution, ±10 V output range, and an aggregate 1,000 Hz update rate. Offering 16 differential or 32 single-ended analog inputs, both multifunction measurement and control modules provide 9 software-selectable ranges from ±0.078 V to ±20 V and 1,000 samples/sec aggregate throughput.
|
DAQ Modules incorporate interactive measurement software.IOtech, Inc.
Bedford Heights, OH 44146-1833
Apr 24, 2009
Offered as out-of-the-box system, 6000 Series combines Ethernet-based DAQ modules with Encore software. Model 6220 is 12-channel, 16-bit voltage input module with 100 kHz per channel sample rate and additional BNC connectors. Model 6224 is 12-channel, strain gage input module offering 24-bit resolution, with 50 kHz per A/D per channel. It is 100% software programmable, facilitating strain set-up and configuration. Both simultaneously sampled modules also include 8 DIO channels.
|
 Data Logger monitors cooking and cool-down of meat products.MadgeTech
Warner, NH 03278
Apr 08, 2009
Featuring rugged flexible piercing probe, RFOT wireless data logger records temperature and transmits it to computer for real-time monitoring of cooking and cool-down of meat products. Probe temperature range is -50 to +200°C and operating range is -30 to +100°C. Device is splashproof (IP67) and withstands wash down cycles. Software includes cooling flags function that automatically highlights FSIS Appendix B cool-down temperatures and calculates cool-down duration.
|
 DAQ Board targets high speed embedded applications.Electro Standards Laboratories
Cranston, RI 02921 3403
Mar 27, 2009
CellMite® ProD features dual 24-bit independent strain gage channels with simultaneous sampling at 15 K samples/sec, and 12 additional 12-bit analog input channels with throughput of 1 M samples/sec. Supporting direct PC or network communication via USB, RS232, RS485, and Ethernet data channels, board offers 16-bit analog output channels with user specified scaling and offset, with range of ±10 V. Rugged board operates from -40 to +85°C, and features 1 MWord of onboard memory.
|
 DAQ Modules offer simultaneous sampling.CyberResearch, Inc.
Branford, CT 06405 2932
Mar 24, 2009
CyberResearch® multifunction UCDAS 04M1 modules feature 4 differential analog inputs running at speeds up to 1.3 MHz, while UCDAS 02M2 units have 2 inputs running at up to 2 MHz. Both USB DAQ modules include 32 DIO lines and 2 x 32-bit counters running at up to 20 MHz. If more than 4 inputs are needed, multiple modules can be synchronized via external trigger or clock connectors. Rugged, compact modules provide 2 ns skew and suit transient analysis and other high-frequency applications.
|
 Frame Grabber works with ExpressCard/54-compliant notebooks.Imperx Inc.
Boca Raton, FL 33487
Mar 13, 2009
HD-SDI Express video capture card can acquire single or multiple images from any SD or HD SDI video source and send them to ExpressCard/54-compliant notebook computer at greater than 235 MBps. Along with support for plug-and-play operation with live insertion and removal, features include lookup tables, histograms, and hex pixel dumps. Card offers 75 W BNC coaxial connector that can accept analog SMPTE 292M serial signal operating at speeds to 1.486 Gbps, with 274M and 296M framing.
|
Vibration Data Collector features wireless operation.Azima DLI
Woburn, MA 01801
Mar 03, 2009
Using DCA-60(TM), plant technicians can collect vibration data and diagnose machine faults on-site or transmit data via Internet to Azima DLI expert analysts as part of WATCHMAN Analysis(TM) program. Unit is capable of simultaneous 4-channel vibration data collection, offers wireless connectivity and multimedia support, and provides 80 GB for data storage. Also included, onboard ALERT(TM) machine vibration analysis software provides various diagnostic tools.
|
(Showing headlines 21 - 40) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
|
|
|
|
 |
ThomasNet News Advertisers
|
 |
|