New Power Entry Modules Integrate IEC Inlet and EMC Filter
DG12 and DG11 feature recessed 2-pole on/off rocker switch circuit breaker with 1 or 2-pole overcurrent protection. DG12 includes standard and low leakage mains filter as well as standard and high inductive performance options. Modules are IEC rated up to 10 A at 250 VAC and UL/CSA rated up to 15 A at 125/250 VAC.
Read More »
New Power Entry Modules Integrate IEC Inlet and EMC Filter
DG12 and DG11 feature recessed 2-pole on/off rocker switch circuit breaker with 1 or 2-pole overcurrent protection. DG12 includes standard and low leakage mains filter as well as standard and high inductive performance options. Modules are IEC rated up to 10 A at 250 VAC and UL/CSA rated up to 15 A at 125/250 VAC.
Read More »
New AP730 Multi-function I/O Module Can Move Data Between Module Memory and PCIe Bus
Features high-density mix of 28 I/O channels and 32-bit counter/timers in 30 x 70 mm. card. Offers eight differential analog inputs (0-10V, ±10V ranges) feed 16-bit A/D converter capable of sampling at nearly 800 KHz. Bidirectional digital I/O is configured as two 8-channel groups with TTL-compatible thresholds and programmable change-of-state or level interrupts.
Read More »
New AP730 Multi-function I/O Module Can Move Data Between Module Memory and PCIe Bus
Features high-density mix of 28 I/O channels and 32-bit counter/timers in 30 x 70 mm. card. Offers eight differential analog inputs (0-10V, ±10V ranges) feed 16-bit A/D converter capable of sampling at nearly 800 KHz. Bidirectional digital I/O is configured as two 8-channel groups with TTL-compatible thresholds and programmable change-of-state or level interrupts.
Read More »
Guide to FDA Approval & Compliance
Manufacturers must comply with FDA rules and regulations to ensure public health.
Read More »
New FMC259 Fiber FMC+ Module Meets VITA 57.4 (FMC+) Specification
Offers dual board-mount optical assemblies, each providing 24 channel full-duplex transceivers capable of up to 28.1 Gb/s per channel. Provides clock data recovery and front-panel fiber I/O via MTP/MPO that has on board ultra-low jitter clock generator with two independent, fractional PLL. Features clocking that allow synchronization to an external clock input or on board and comes with LEDs in...
Read More »
New FMC259 Fiber FMC+ Module Meets VITA 57.4 (FMC+) Specification
Offers dual board-mount optical assemblies, each providing 24 channel full-duplex transceivers capable of up to 28.1 Gb/s per channel. Provides clock data recovery and front-panel fiber I/O via MTP/MPO that has on board ultra-low jitter clock generator with two independent, fractional PLL. Features clocking that allow synchronization to an external clock input or on board and comes with LEDs in...
Read More »
New Rugged ECU Accelerates ADAS and Autonomous System Product Design
RVP-TDA4Vx production-intent kit features TDA4VM SoC processor and configurable SerDes interface. Supports multiple SerDes capture streams with different transport protocols through its configurable personality card. Ideal for automated valet park, neural networks, video analytics, driver notification, multi-camera display, mirror replacement and sensor fusion applications.
Read More »
New Rugged ECU Accelerates ADAS and Autonomous System Product Design
RVP-TDA4Vx production-intent kit features TDA4VM SoC processor and configurable SerDes interface. Supports multiple SerDes capture streams with different transport protocols through its configurable personality card. Ideal for automated valet park, neural networks, video analytics, driver notification, multi-camera display, mirror replacement and sensor fusion applications.
Read More »
New Dual Channel CAN Bus Expansion Board Compatible with Linux, Windows and VersaAPI
C1 is fully backwards compatible with CAN 2.0 A and CAN 2.0 B with signaling up to 1 Mbps. Provides 2.5 kV of signal isolation to protect the host computer and increase system resilience. Delivers an simple and economical way to add high-speed CAN Bus ports to any embedded computer systems.
Read More »
New Dual Channel CAN Bus Expansion Board Compatible with Linux, Windows and VersaAPI
C1 is fully backwards compatible with CAN 2.0 A and CAN 2.0 B with signaling up to 1 Mbps. Provides 2.5 kV of signal isolation to protect the host computer and increase system resilience. Delivers an simple and economical way to add high-speed CAN Bus ports to any embedded computer systems.
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
