Modules

Data Logger is available with Bluetooth wireless interface.

Data Logger is available with Bluetooth wireless interface.

PRTemp1000 is available with BTIF1000 accessory, which provides secure BluetoothÂ-® wireless link between data logger and Pocket PC. Rated IP67 for use in wet or underwater environments, accessory allows for wireless in-the-field downloading using Pocket PC software. Its one-button operation facilitates downloading and restarting. Currently only for use with PRTemp1000, BTIF1000 will support...

Read More »

Serial-to-Wireless Modules provide 802.11n connectivity.

Operating in 2.4 GHz ISM band, serial wireless device server modules RS9110-N-11-21 and RS9110-N-11-22 provide industrial devices and other equipment with wireless connectivity to LANs without needing to install wireless networking software or network stack. They integrate Lite-Fi(TM) RS9110 chipset, integrated 802.11n SoC, RF transceiver, power amplifier, EEPROM, and external front-end...

Read More »
Power Entry Modules mount in tight spaces.

Power Entry Modules mount in tight spaces.

Providing overcurrent protection up to 20 A, Series 6135 offers C14 appliance inlet, while Series 6136 features C20 inlet, according to IEC 60320. Both provide snap-in mounting and are equipped with thermal positively trip-free release circuit breaker. Series 6135 features 2-pole switch with or without 1- or 2-pole overcurrent protection, while 6136 is offered in 1-pole with switch only or switch...

Read More »

PMC I/O Module employs reconfigurable Virtex-5 FPGA.

Featuring XilinxÂ-® Virtex(TM)-5 FPGA with hard core PowerPC block, PMC-VFX module enables users to offload CPU-intensive operations such as video/3D data processing or floating-point math for system performance. It offers DDR2 DRAM and dual-port SRAM for high-speed DMA transfer to PCI bus. PMC base card provides 64 I/O channels or 32 LVDS lines accessible via P4 rear connectors, while...

Read More »

BradCommunications(TM) SST(TM) PLC Communication Modules Updated to Provide Users with Enhanced Functionality

New features added to AS-Interface, Modbus and PROFIBUS modules Lisle, IL - November 19th, 2008 - Molex Incorporated (NASDAQ: MOLX AND MOLXA), announces new features added to its BradCommunications(TM) SST(TM) PLC communication modules. BradCommunications SST PLC communication modules provide the interface required for a Rockwell AutomationÂ-® PLC controller to connect to specific industrial...

Read More »
Intersil Releases Samples of 10A, Highly Integrated Power Module Featuring PWM, Drivers, MOSFETs and Inductor in a Tiny QFN Package

Intersil Releases Samples of 10A, Highly Integrated Power Module Featuring PWM, Drivers, MOSFETs and Inductor in a Tiny QFN Package

ISL8201M DC/DC Module Has 4.5V to 20V Input Voltage Range, 0.6V to 5V Output Range And 10A Current Capability in a 15mm x 15mm x 3.5mm QFN Package ELECTRONICA, Munich, November 12, 2008 - Intersil Corporation (NASDAQ Global Select: ISIL), a world leader in the design and manufacture of high-performance analog semiconductors, today announced the development of the ISL8201M, a highly integrated...

Read More »
Power MOSFETs offer TurboFET(TM) technology.

Power MOSFETs offer TurboFET(TM) technology.

Utilizing charge balanced drain structure to lower gate charge by up to 45% for lower switching losses and faster switching, Gen III TrenchFETÂ-® power MOSFETs include two 20 V and two 30 V n-channel devices. They feature on-resistance times gate charge FOM down to 76.6 mWnC at 4.5 V and 117.60 mWnC at 10 V. 30-V TurboFET models Si7718DN, and Si7784DP offer gate charge of 13.7 nC at 4.5 V and...

Read More »

Half-Bridge MOSFET Modules come in ISOPLUS i4-PAC(TM) packaging.

Providing drain to source breakdown voltages of 100, 150, and 200 V with drain current ratings from 17-54 A, FMP module combines P- and N-Channel MOSFETs configured in phase-leg or half-bridge topology with common drain arrangement. FMM module is comprised of 2 N-Channel MOSFETs and offers drain to source breakdown voltages of 200, 250, 500, and 600 V with drain current values of 12-33 A. Modules...

Read More »
PoE+ Connector Module integrates embedded PoE+ controller.

PoE+ Connector Module integrates embedded PoE+ controller.

HyperJack(TM) 1000 Power-over-Ethernet Plus (PoE+) Integrated Connector Module is multiport unit that integrates magnetics to support Ethernet 10/100/1,000 Mbps. It embeds PoE+ power management functions in RJ-45 connector and includes PoE+ controller silicon to manage/deliver 30 W PoE, with protection against ESD, EFT, and EMI. Operating in temperatures from 0-70Â-

Read More »

I/O Module expands Profibus and Profinet networks.

Attaching directly to Profibus or Profinet network, IO-Link(TM) Expansion Module enables users to attach up to 4 intelligent IO-Link sensors up to 20 m away using 3-conductor M12 cordsets. Sensor hubs allow connection of 16 standard discrete sensors to network per hub. Up to 4 hubs per expansion module can be put on each node, giving total of 76 sensors per Profibus node. Sensors are available in...

Read More »

All Topics