Ideal Industries, Inc.
Sycamore, IL 60178
May 14, 2007 WireMan(TM) pliers are available with ergonomic SmartGrip(TM) handles to eliminate fatigue placed on fingers, wrist, and forearm during operation. Handles consist of hardened Santoprene® layer that promotes comfort with curved form factor, and soft/textured Santoprene layer that promotes grip even when wet. While knife-to-knife precision blades provide control and strength when cutting various wire types, cross-hatched jaws prevent slippage while pulling even heavily lubed wires.

DeWalt Industrial Tool Co.
Hampstead, MD 21074
May 11, 2007 Suited for cutting up to 20 ga spiral duct and uneven, non-flat sheet metal, DC495KA is powered via XRP(TM) extended run-time 18 V battery and features head that rotates 360° for access in tight areas. Design separates material without creating waste ribbon and lets users turn tool to make radius cuts as small as 1 in. dia. Speed can be varied from 0-2,300 SPM, and ergonomic design features anti-slip grip. Tool weighs 6.1 lb and has 18 ga capacity in steel.

Stanley Assembly Technologies
Cleveland, OH 44143-2328
May 01, 2007 Lightweight EA series dc electric threaded fastening tools features compact housing, brushless dc servo motor, and ergonomic handle with multiple light sets for 360° operator viewing. Series also includes angle-style EA tools which use Zerol® spiral bevel gear geometry for durability.

J P Sercel Associates
Manchester, NH 03102
May 01, 2007 Designed for isolation and series interconnection of thin film solar cells, PV Series laser scribing system produces fine scribed lines with greater than 30 mW isolation. It can remove wide range of thin films from large glass, metal, or polymer substrates. Variety of wavelengths for different layer materials are available including 1,064, 532, 355, and 266 nm. Modular workstation can accommodate 1,300 x 1,300 mm glass sheet sizes.

Control Co.
Houston, TX 77258 8307
Apr 27, 2007 Stainless-Steel Labtool II(TM) Model 3326 features 14 tools including ruler, 3 knives, and needle; it weighs 7 oz and measures 3½ in. when closed. With 13 tools including scissors, file, and key chain, Stainless-Steel Mini-Labtool(TM) Model 3327 weighs 3 oz and measures 2½ in. when closed. Both include aluminum handle along with bottle opener, pliers/gripper, wire stripper, wire cutter, knives, and flat-head and Phillips(TM) screwdrivers.

AlarmLink, Inc
Topanga, CA 90290
Apr 27, 2007 Featuring 2-way voice capability and built-in router, i.Ip.Link Alarm over IP (AoIP) module connects to telephone line of almost any alarm control panel and can communicate with dedicated server through router. It enables alarm transmitters to communicate with central station reliably using Internet connection.

Greenlee Textron, Inc.
Rockford, IL 61109
Apr 23, 2007 Featuring diamond-serrated jaws and induction-hardened blades, side-cutting pliers come in 8 or 9 in. lengths and have handle ridge for choke-up capability. Angled diagonal-cutting pliers allow end-user to place head of pliers flush against surface while gripping handles securely. Offered with 6, 7, or 8 in. flared handles, long nose pliers feature wide-grip design for optimal load bearing. Molded grip pump pliers (10 and 12 in.) incorporate ergonomic grip and right-angled teeth.

Ingersoll-Rand Co.
Annandale, NJ 08801
Apr 18, 2007 Suited for automotive and industrial applications, W360-2 provides operator access to hard-to-reach areas. This ½ in. Impactool(TM) weighs under 6.4 lb and delivers 360 lb-ft of reverse torque. Onboard battery electronics provide operators with ability to choose lithium-ion or nickel-cadmium batteries, and IQV charger is compatible with all IQV batteries. For optimal control during fastening and loosening, tool incorporates variable speed trigger and electrical brake.

Gensco America, Inc.
Decatur, GA 30035
Apr 18, 2007 Suited for rebar fabrication and precast industries, RAPID CUT tools include elongated handle versions that allow operators to reach directly into a form, or any awkward spot, with no bending. Tools are suited for cutting high-tensile wire and rod, wire mesh, strand, and rebar.

Metabo Corp.
West Chester, PA 19380 4243
Apr 16, 2007 Providing up to 549 lb-in. torque, BSZ 18 Drill/Driver can drill up to ½ in. holes in mild steel and 1 3/16 in. holes in soft wood. No-load speed is from 0-450 and 0-1,450 rpm. Able to bevel cut up to 47°, 6½ in. KSAP 18 Circular Saw cuts up to 2 1/8 in. deep at 90° and 1 5/8 in. at 45°. ASE 18 Reciprocating Saw delivers 0-2,700 strokes/min and has Quick blade-changing system. Kit also includes flashlight, AC30 Plus charger, two 18 V 2.2 Ah Li-Power 20 batteries, and carrying case.

Big Kaiser Precision Tooling, Inc.
Elk Grove Village, IL 60007
Apr 11, 2007 With KAB connection featuring high clamping force, indexable insert drill is suited for drilling in inclined entry or exit surfaces. Available in 16-30 mm and 3 x D and 4 x D with KA6 connection, product includes straight flutes that ensure short distance for chip evacuation and high radial/torsional rigidity. Inserts are available for all kinds of workpiece materials with 4 cutting edges, while adjustable drill holder allows drills to cut fractional sizes.

Cooper Power Tools
Lexington, SC 29071
Apr 04, 2007 Designed for safety-critical fastening, Cleco® 17B Pistol and 47B Angle series with LiveWire(TM) technology are Wi-Fi Certified to function with production requirements. On-board reaction transducer and resolver technologies report, calculate, and trend different results, enabling intelligent operation. Line controllers maintain direct communications with plant networks and provide local data storage, troubleshooting, and programmability for up to 10 cordless tools.

ACT Fastening Solutions
Gardner, MA 01440
Mar 29, 2007 Designed to save time and cost associated with replacing nicked wires and hoses damaged during maintenance and repairs, hand tools feature smooth safety guards that slide behind strap to prevent sharp blades from contacting bundled items. Features include ergonomic cushion grip handles designed for optimal natural hand contraction and auto return spring. Intended users include maintenance technicians, assemblers, shipping and receiving personnel, and electricians.

Xuron Corp.
Saco, ME 04072 1840
Mar 09, 2007 Featuring one serrated edge, Scissor Model 9180 cuts strips between .019-.034 in. thick, while full by-pass Shear Model 2193 cuts rod from .20-80 in. diameter and .060 in. ID tube. Tools create square cut on strip and rod, but it is recommended users insert wire into tube before cutting to prevent thin walls from crushing. Both tools include cushioned Xuro-Rubber(TM) grips, return springs, and precision ground high carbon steel blades.

DeWalt Industrial Tool Co.
Hampstead, MD 21074
Mar 07, 2007 IMPACT READY(TM) 38-piece accessory set, Model DW2169, includes 3/8, 7/16, ½, and 9/16 in. 6-point deep sockets rated for impact drivers up to 2,000 lb-in. Stainless steel pivoting bit tip holder offers 20° pivot, hog retention ring, and ¼ in. hex shank, while double-ended 1 in. bit tips feature 2 usable ends and are designed to fit all bit tip holders, drive guides, drywall guns, and drivers. Set also includes nutsetters, socket adapters, and screwdriving bits.

Bondhus Corp.
Monticello, MN 55362 9347
Mar 02, 2007 Certified for applications up to 1,000 V, E-Smart Tools are individually tested to 10,000 V to assure integrity of insulation. Screwdriver blades are machined from European Chrome/Molybdenum/Vanadium steel and heat-treated to highest possible hardness levels. Tools can be used singly as precision screwdrivers, or as full-sized screwdrivers when locked into supplied handle.

TRUMPF Power Tools
Farmington, CT 06032
Feb 28, 2007 Working with punching machine, roller deburring tool and 3-way deburring MultiTool negate need for separate manual deburring stage and displace any burr by chamfering sharp edges (~0.004 in.) on underside of part. Roller deburring tool uses specially formed embossing roll for long edges and contours with radius of 0.8+ in., while deburring MultiTool handles smaller radii, intricate geometries, and corners in single stroke or in nibble mode.

DeVilbiss , ITW Industrial Finishing
Glendale Heights, IL 60139
Feb 07, 2007 Designed using CFD technology to model passageways and air caps to reduce turbulence and enhance atomization process, Compact Performance Series Spray Guns are offered in suction, pressure, and gravity feed versions. Conventional, HVLP, and Trans-Tech Spray Models feature brass air caps and SS fluid tips and needles that are compatible with all industrial spray coatings. Forged aluminum alloy gun body with no-baffle design weighs 14.6 oz.

Ingersoll-Rand Co.
Annandale, NJ 08801
Feb 06, 2007 Engineered with composite housings, IQV Series is comprised of W040 ¼ in. quick-change Impactool(TM), W150 3/8 in. Impactool, and W360 ½ in. Impactool, as well as 19.2 V D650 and 14.4 V D550 drill/drivers. Composite housings protect against damaging chemicals and fluids and are reinforced with metal design. With IQV Grip, tools feature twist-to-lock design that locks battery in place. IQV charger automatically detects battery voltage and chemistry and chooses correct charge algorithm.

DesignOvations, Inc.
Loveland, OH 45140
Feb 06, 2007 Designed to keep blades safely contained, BLADEater© Leather Holsters hold utility snap knife, snapped blade segments, and spare blades in 3 separate compartments. Model LH06 includes belt loops and holds BLADEater© DB01 complete pack. Black polypropylene insert adds extra protection in case user forgets to retract blade. Featuring belt loops and additional metal clip for mounting to pocket or belt, Model LH07 holds 10-blade refill cartridge and 9 mm snap knife.