FlowCon Americas LLC
Charlotte, NC 28269
Oct 08, 2008 Offering 51 distinct flow rate settings per valve size and control range, Total Authority Valve(TM) is 99.8% accurate in system wide application. It features double union end connection with wide selection of end fittings, or double flange connection for ease of installation. Tamper-proof valve is externally adjustable allowing to change desired maximum flow rate while system is operating. Pressure and temperature measurement plugs are also available.

Norgren
Littleton, CO 80120
Oct 07, 2008 Model VS45 features plug-in subbase manifold that is fully modular and is offered in 3/8, ½, and ¾ in. port sizes. Unit offers pressure capabilities of vacuum up to 232 psi and flow up to 4.20 Cv. Suited for heavy industry applications, valves include both softseal and glandless spool technologies.

Sealant Equipment & Engineering, Inc.
Plymouth, MI 48170-0965
Sep 10, 2008 Available for ambient and controlled temperature dispensing applications for critical curing processes, 2151-482 Series Servo-Mix(TM) Dynamic Mix and Dispense Valve features standard disposable static mixer element which is attached to drive shaft of variable speed servo motor for low to high speed mixing set by operator on control panel interface screen. It uses 2 No-Drip® KISS® Series fluid control valves to start and stop the flow of part A and part B materials.

Graco Inc.
Minneapolis, MN 55440
Sep 02, 2008 Suited for indoor/outdoor use, SD Series includes SDM15 and SDP15 meters that feature 14.0 gpm flow rates, while SDM5 and SDP5 have flow rates up to 5.0 gpm. Units offer triggering action that controls dispense flow, pressure balanced valve for equal trigger force at low/high flow triggering for less operator fatigue, straight-thread O-ring boss nozzle extension for non-leaking performance without sealant or tape, and automatic twist-lock nozzle that eliminates dripping.

ARI-Armaturen
Stukenbrock   United Kingdom
Aug 04, 2008 CONA All-in-One solution integrates steam trap, isolation valves, strainer, check valve and blowdown valve and requires just two pipe connections. Multi-valve system performs functions such as isolation, safety, control and steam trapping, and suits industrial applications including main line draining, steam distributing and tracing systems, as well as process industry.

FlowCon Americas LLC
Charlotte, NC 28269
Aug 01, 2008 Able to adjust to one of 40 different flow rates using special secure key, AB valves provide automatic balancing which enables desired flow rate to be achieved as well as dynamic balancing which maintains flow rate as each valve compensates for pressure fluctuations in system. They feature pressure and/or temperature measurement plugs for verifying conditions of heating/cooling water in system, and multiple connections for different system configurations.

Continental Hydraulics
Savage, MN 55378
Aug 01, 2008 F0*MSV line of stackable valves feature direct operated cartridge-type electrical operated poppet that allows for high flow-through or restricted adjustable flow-through. Available in variety of coil voltages and either NO or NC cartridges to meet specific user requirements, valves can be added to any existing manifold mounted valves where system enhancements may be required. Space saving units ensure zero fluid leaks through O-ring sealed installation.

Continental Hydraulics
Savage, MN 55378
Aug 01, 2008 With modular, space saving design, PO*MSV line of stackable, pressure compensator valves are used to create constant pressure differential between inlet and outlet of proportional valves. Available in both Restrictive and By-Pass styles for either variable or fixed delivery circuits, valves control pressure drop by sensing pressure in A & B outlet ports, which is added to adjustable spring setting, causing valve to open or close to help maintain constant pressure drop.

Continental Hydraulics
Savage, MN 55378
Aug 01, 2008 Double Redundant Dual Monitoring and Lock-Out valves offer clean compact solutions, either connected directly to main power source or as part of a branch circuit feeding one of many work cells. Double redundant package is built with 2 valves that incorporate spool position monitoring switches and 2 pressure tap ports. Lock-Out valve is designed to assist in meeting lock-out/tag-out requirements to protect technicians performing maintenance, repair, or set-up operations.

Continental Hydraulics
Savage, MN 55378
Aug 01, 2008 Model VED05M Proportional Control Valve features On-Board electronic amplifier which is packaged within fully potted, anodized aluminum housing providing IP65 environmental protection. It also features Hall-Effect spool position sensor for closed spool inner loop operation. With field-replaceable components, valve is offered with numerous spool flow ranges, load metering styles, and various spring center conditions, and can be tailored to customer specifications.

Lee Company, The
Westbrook, CT 06498 0424
Jul 28, 2008 Designed specifically for optimal performance in harsh duty applications, Model 440C Lo-Lohm Chek® check valve is constructed entirely of corrosion-resistant stainless steel. It features durable 440C poppet and seat that provides resistance to damage from contamination. Available in forward and reverse flow directions, space saving unit offers high flow capability. Custom valves using MP35N can also be designed for severely corrosive environments.

Valcor Engineering Scientific Div.
Springfield, NJ 07081
Jul 11, 2008 Designed to handle liquid carbon dioxide, SV91 Series features all-welded, leak-tight stainless steel construction with straight-thru flow path. Direct-acting shear seal design ensures positive shifting and sealing. Available in 2 versions rated at 350 and 1,000 psi, solenoid valve is suited for use in fog producing systems, food processing, chillers, and other temperature control devices.

Ross Controls
Troy, MI 48083
Jul 09, 2008 Available with ¼ and 3/8 in. ports, manual L-O-X® Valves control airflow and are designed to meet OSHA regulations, ANSI standards, European regulation EN 1037, and Canadian Standard CSA Z460. When handle is pulled outward, air moves freely. Short inward push of handle shuts off airflow and opens exhaust port to release downstream air. Equipped with Teflon seals, valves offer indicator port option for test point verification of absence of energy downstream.

Sealant Equipment & Engineering, Inc.
Plymouth, MI 48170-0965
Jul 08, 2008 Based on No-Drip® design that integrates carbide ball-end needles with carbide seats for fluid control, 2200-545 Series Adjustable Stroke Mix-Dispense Valve can control flow of 2-component adhesives and sealants such as silicones, epoxies, urethanes, and acrylics. Measuring 2.25 in. dia and 5.5 in. long, double air actuated valves have two 1/8 NPT ports for 4-way pneumatic connections. Rated for 3,500 psi, valve is also available with eyelet stem for attaching to tool balance.

Parker Hannifin Corp., Instrumentation Valve Div.
Jacksonville, AL 36265-9681
May 13, 2008 Suited for applications up to 20,000 psi, 20K Hi-Pro Ball Valve and 20K H-Series Needle Valve are fabricated from 316 SS and offered in NACE-compliant and Heat Code Traceable versions. Ball valve features 2-piece construction, minimizing potential leak paths. Unit is fully bi-directional and actuated by 90° turn. Offering multi-turn action, needle valve operates from -65 to +392°F. Both instrumentation valves are available with Phastite® tube connector ends, which minimize assembly time.

Assured Automation
Clark, NJ 07066
Feb 12, 2008 Combining process valve and actuator in single integrated unit with only 1 moving part, VAX valves are available in 2- or 3-way configurations with pressure ratings up to 600 psi. Units have 0.25 msec shut-off speed in either direction and pressure balanced design with spring return functions regardless of system pressure or pressure differential on either side. Valves are available in electric and pneumatic as well as direct-acting or air-actuated versions.

Flomatic Valves Div., The Danfoss Group
Glens Falls, NY 12801
Feb 07, 2008 Designed to regulate downstream pressure, Cycle Gard® Constant Pressure Pump Control Valves provide constant pressure until demand in system is no longer required. They feature hydraulically operated valve requiring no electricity and help eliminate effect of water hammer. Depending on valve model, integral/external low flow by-pass allows system pressure to slowly rise under low demand and fill tank or reservoir until pressure switch setting is reached, shutting pump off.

Electronics, Inc.
Mishawaka, IN 46545
Jan 23, 2008 Utilizing permanent magnet and electro-magnet, MagnaValve(TM) regulates flow of steel shot in blast cleaning machines. When no power is applied, permanent magnet stops all flow. With power applied, magnetic field is neutralized and shot is allowed to flow through valve. MagnaValve may be used with amperage control or flow control using built-in sensor. Available in 24 Vdc and 110 Vac models, valve works with cast steel shot and grit, cut wire shot, and stainless steel cut wire shot.

Sauer-Danfoss
Ames, IA 50010
Jan 15, 2008 Available in 10, 12, and 16 series standard cavity sizes, Proportional Flow Control Cartridge Valves work in conjunction with hydraulic ICs to regulate fluid flow that controls specific equipment operations. All valves come standard with M19P and D14E coils, which are tolerant of adverse conditions ranging from voltage extremes to high temperatures and water ingression. Pressure capability is 3,770 psi and max flow rate is 32 gpm.

Severn Trent Services
Fort Washington, PA 19034-2707
Nov 09, 2007 Capital Controls® Series 70CV3000 Chloromatic(TM) 3000 Intelligent Gas Flow Control Valve is integrated, microprocessor-based controller and valve that responds to multiple process signals from water flow transmitter/chlorine residual analyzer. It features 10 range capacities from 10-3,000 lb/day for chlorine, and is also usable with sulfur dioxide, ammonia, and carbon dioxide. System comes with 11-step calibration of valve plug that yields gas flow retransmission signal.