Mini Spool Valve is designed for low-high viscosity fluids.
Model VMS400 dispenses RTV/Silicones, Solder Pastes and Masks, Sealants, and UV Adhesive with up to 700 lb fluid pressure. Suck-back helps adjust fluid cut-off at end of cycle, while UHMW-PE seals separate wetted materials from pneumatic movement. With minimum shot size of 0.1 cc, valve can cycle up to 400/min using 4-way controller. Device suits applications requiring precision and repeatability...
Read More »
Mini Spool Valve dispenses low- to high-viscosity fuids.
Able to handle up to 700 lb of fluid pressure, Model VMS400 has adjustable Suck-Back so that fluid cutoff at end of cycle can be finely adjusted. Unit features minimum shot size of 0.1 cc and can cycle up to 400/min using 4-way valve controller. Wetted materials are separated from pneumatic movement by UHMW-PE seals. Valve is suitable for use with RTV/silicones, solder pastes and masks, sealants,...
Read More »
Valve controls pressures from full vacuum to 500 psig.
With slightly enlarged air piloted regulator section, Model QB3H features Nor-Kote(TM) surface finish for high corrosion resistance. Aluminum bodied valve is suitable for most inert gases in high pressure applications, while brass valve is designed and cleaned to specifications for use with oxygen service. NEMA4/IP65 rated units feature stainless steel pressure transducers.
Read More »
Regulating Valves feature field adjustable pressure.
Direct-acting Model PRV Series C150E regulates high upstream inlet pressure to lower constant downstream outlet pressure within range regardless of water flow. Adjustable, spring-loaded balancing valves are factory set to automatically regulate downstream pressure to 50 psi. Featuring unleaded bronze bodies in sizes Ã-½, Ã-¾, and 1 in., units are supplied with pressure range of 15-75 psi...
Read More »
Humphrey GEN2 System Offers Independent Intelligent Control of Multiple Sequential Operations
The GEN2 (TM) System from Humphrey Products takes the concept of distributed computing to the next logical step: Independent Intelligent Control(TM) of multiple sequential control operations. Instead of a central computer, each GEN2 valve module contains its own on-board programmed logic. This enables each module to communicate directly with other modules, both upstream and downstream, and make...
Read More »Emerson Announces ATEX Approval for Fisher-® DVC2000 Digital Valve Controller
Newest member of the FIELDVUEÃ-® family is approved for use in potentially explosive atmospheres MARSHALLTOWN, IOWA (April 11, 2006) -- Emerson Process Management announces that the FisherÃ-® DVC2000 series digital valve controller now has ATEX Certification to EEx ia 11C T4/T5, making it suitable for use in potentially explosive atmospheres. The Fisher DVC2000 is an intelligent valve...
Read More »
Mix-Dispense Valve delivers miniature material beads.
Two-component Model 2200-545-037 uses No-DripÃ-® technology for dispensing solvent-based, moisture-curing, and stringy materials such as epoxies, silicones, and polyurethanes. Pneumatically actuated valve opens and closes carbide resin- and catalyst-material passages at mixer entrance to precisely start and stop material flow. It has stainless steel wetted components, dual carbide...
Read More »
Mixing Valve features lockable temperature adjustment knob.
Suited for commercial and institutional applications, single-fixture Model 108 Thermostatic Water Mixing Valve incorporates 3/8 in. connections and wax element to control temperature. It allows for close approach temperature, so that mix temperature can be within 5Ã-
Read More »Modular Valve controls compact equipment.
Rated 10.6 gpm and 4,350 psi, VO40 Open-Center Directional Control Valve can be stacked to 10 sections. Optional lock-valve section can be used in applications where no leakage or function drift is allowed. Metering notches on spool lands let operator actuate functions simultaneously, while slotted design of valve sections allows users to add or change sections and functionality. Enclosed handle...
Read More »Valve Systems suit high water demand applications.
Navigator TMV models S59-3260 and S59-3400 include 2 High-Low thermostatic mixing valves pre-assembled with piping assembly and inlet/outlet shut-off valves to handle water capacity requirements up to 260 and 394 gpm, respectively. Valves blend hot and cold water to regulate water temperature to within 3Ã-
Read More »
Come Alive Organics' Premium Organic Agave Provides a Healthier Choice
Come Alive Organics distributes all-natural, proprietary flavored agave for the food and beverage industry while helping children across the globe. Learn more about our agave products and our one sweet cause in this video and two-page PDF.
Read More »
