LBP Manufacturing, Inc    Cicero, IL 60804
Sep 21, 2012 Compatible with Keurig® and other single-serve brewers, UpShot™ Solution is composed of 100% recyclable polypropylene with outer seal that can also be made with recyclable materials. Unit features proprietary mesh design that enables consumers to see and smell coffee or tea once fresh seal is opened. Designed to accommodate 8-12 g of coffee grinds, UpShot gives roasters ability to control the fill and achieve optimal coffee- to-water ratio.

Norgren    Littleton, CO 80120
Sep 21, 2012 Combining cylinder, pilot and control valves, position sensors, and speed regulators in single unit, Integrated Valve and Actuator Control eliminates tubing and remote valve islands typical of pneumatic operations. Cleanline version, with switches and valve inside smooth casing, features IP67 rating, making it suitable for operations such as food or beverage handling where frequent washdowns are required. IVAC requires 1 electrical connection and 1 pneumatic connection for operation.

Salina Vortex Corp.    Salina, KS 67401
Sep 19, 2012 Offered in 4–16 in. diameters, Model HDPV2 is suitable for handling powders, pellets, and granulars. Wide bonnet eliminates dead pocket where material could build up, while long body frame allows inspection and replacement of seals and parts while gate remains in service. Valve also includes replaceable nylon insert on rising clevis, shimming system that compensates for seal wear, and reusable precut gaskets. Cast into frame, air cylinder mount minimizes area where potential leakage could occur.

Parker Hannifin Plc    Barnstaple Devon EX31 1NP  United Kingdom
Sep 18, 2012 Electronic controls for P1/PD series pumps, available with or without programmed electronic control unit (ECU), let users optimize hydraulic performance and efficiency in mobile and industrial open circuit applications. Basic functions include fan control, proportional displacement and pressure controls, and overcenter capability. Designs without ECU are available with either displacement default position and with or without displacement sensor or hydro-mechanical pressure limiter.

Super DRY North America, LLC    Jacksonville, FL 32256
Sep 17, 2012 In line with IPC/JEDEC-J-STD-033C standard, Model U-5002 achieves air moisture levels less than 0.5% RH, even at temperatures of 60ºC. During cabinet door opening, air moisture levels barely rise above 5% and sink within 4 min to <1%. Microprocessor and solid state sensor monitor state of desiccant and compare it with set point values. When moisture content in cabinet exceeds absorption capacity of drying substance, thermal regeneration begins.

Industrial Specialties Mfg, Inc.    Englewood, CO 80110
Sep 14, 2012 Standard Plastic Fittings are available with spring loaded check valve cartridges made of nylon or polypropylene with O-ring seal consisting of Buna-N, Viton, EPDM, or Silicone. Cracking pressures range from 3 in. H2O to 10 psi. Also offered, free floating ball cartridges are made of polypropylene with EPDM ball. Less than 1 psi is required to open valve, and both normal and reverse flows are available.

Top Line Process Equipment Co.    Bradford, PA 16701
Sep 14, 2012 Featuring circumferential piston design and helical timing gears, TRA® 10 and 20 Series provide gentle action for shear-sensitive liquids, or slurries with soft solids, that suit such areas as food processing as well as beverage and cosmetic manufacturing. Design and cleanability make series applicable for all sanitary fluids. Typical applications include dairy, bakery, meats, canned foods, beverages, candy, flavorings, dressings, cosmetics, and industrial.

Visteon    Dearborn, MI 48126
Sep 07, 2012 Classified as a metal gasket under SAE J2727 refrigerant emission chart, Metal Seal Fitting is designed to eliminate refrigerant leakage stemming from air conditioning connections in vehicles. Fitting exceeds demanding requirements for R134a, R1234yf, and other alternative refrigerants in development. Additional advantages include protection from damage due to handling and minimal pressure drop due to full-flow internal design.

Metso Power    Charlotte, NC 28277
Sep 07, 2012 Suited for new construction or as retrofit for existing recovery boilers, Metso Smelt Spout System consists of smelt spout, upper/lower micro hoods, hood showers, and ShatterMax(TM) dual shatter jet. Insertable and water-cooled smelt spout's tip projects inside furnace, minimizing wear on tube openings as well as smelt leak risk. Each ShatterMax(TM) dual shatter jet nozzle is rated for less than 400 lb/hr flow with 160 lb steam, and adjustable shatter jet brackets enable accurate positioning.

CAT PUMPS    Minneapolis, MN 55449
Sep 06, 2012 Designed for carpet extractors used in applications from 0.5-2.0 gpm and 100-800 psi, 1XP Series is based on greaseless design that utilizes pumping fluid for lubrication. Wet ends are 100% sealed to ensure contaminants do not leak onto cleaning surface, and design enables retrofit installation into existing extractor while also extending overall pump life and reducing maintenance frequency. Additional applications include misting and hydrostatic testing.

Nex Flow Air Products Corp.    Williamsville, NY 14221
Sep 06, 2012 Made of cast zinc aluminum, Nex Flow(TM) Air Edger(TM) works by producing laminar flow of air along its 2 in. length using Coanda effect, which entrains large volume of air from surrounding area along with small amount of compressed air from nozzle itself to produce amplified output flow. Changing or stacking various shim sizes allows user to set force needed for any application. Designed to meet OSHA pressure level requirements, nozzle minimizes compressed air consumption and noise.

Norplex Micarta    Postville, IA 52162
Sep 05, 2012 Composed of glass fabric with epoxy resin system, RT130X is designed for electrical and mechanical strength as well as flame resistance. Extra fine weave glass substrate allows for cleaner machining with less exposed fiber. Standard lengths are 18 and 36 in. IDs range from 0.094-48 in., ODs range from 0.156-49.50 in., and wall thickness ranges from 0.031-0.750 in. Tubing complies with NEMA FR-4 and is flame resistant to a UL94 V-O rating.

Clark Solutions    Hudson, MA 01749
Sep 05, 2012 Incorporating magnetic drive and 24 V brushless DC drive motor in rotor-less configuration, FG Series provides precise transfer of aggressive fluids. Chemical-resistant pumps feature AISI 316L or PPS housings and PEEK/PTFE gears and bushings. Providing pulsation-free flow up to 205 lph, pumps are suited for medical devices and scientific/laboratory systems as well as food processing and water purification systems.

Count On Tools    Gainesville, GA 30501
Aug 31, 2012 Suited for semiconductor market, urethane nozzle series features tips that prevent components with very fine surface finishes from getting stuck on nozzle during pick-and-place process. Urethane material creates vacuum bond with components and promotes placement accuracy as well as reliability while overcoming substrate sticking issues. Material also improves component release onto board, preventing misplaced parts, lost components, or miss-picks.

The Lee Company, Industrial Microhydraulics Group    Westbrook, CT 06498
Aug 31, 2012 With its port head design, Model LPL2 enables designers to test fluidic systems using connections to soft 1/16 in. tubing. Once system design has been finalized, same pump can be manifold mounted using standard O-rings. Pump also features contoured end cap which provides secondary connector retention and is compatible with standard AMP connectors. Operating from 12 or 24 Vdc, pump consumes 2.5 W and provides standard dispense volume of 50 µL dispense per shot, ±6%.

Interstate Specialty Products    Sutton, MA 01590
Aug 31, 2012 Die cut to custom specifications, FKM Gaskets and Seals are suited for applications that require resistance to fuels, oils, solvents, ozone, and chemicals at temperatures from -10 to 400°F. Products can be fabricated in many shapes and sizes from 0.015 in. thick in single- and multi-ply variations. When softer materials are required, FKM sponge is available in 0.125, 0.250, 0.375, and 0.500 in. sizes. Applications include pumps, compressors, instruments, and variety of mechanical components.

Top Line Process Equipment Co.    Bradford, PA 16701
Aug 31, 2012 Intended for Top Line butterfly valves ranging from 1-4 in., Top-Flo® Canister Actuator has 304 stainless steel shell with O-ring seal, prelubricated internals, and 1/8 in. FNPT x ¼ in. OD air connections for poly tube. Stainless steel brackets and fasteners withstand external washdown environments, while dual stacked coil springs render reliable output torques to ensure valve closure. Visual indication is located on coupler for valve position confirmation.

Lee Company, The    Westbrook, CT 06498 0424
Aug 27, 2012 Utilizing side inlet flow path to help minimize installation boss size and weight, Hi-Q Pressure Relief Valve is capable of flow rates over 19 gpm. Unit is available in range of cracking pressures from 1,000-5,400 psid. It is designed for nominal pressures up to 5,000 psi and system peak pressures up to 6,750 psi.

Thomas Products Division    Sheboygan, WI 53081
Aug 27, 2012 Picolino Rotary pump and compressor are designed for applications such as medical, vacuum lifting, laboratory, air sampling, sewage aeration, and printing. Pulsation-free pump comes in 2 configurations: DTE (pressure), with inlet silencer, pressure relief valve, and outlet tube connector, and VTE (vacuum), with outlet silencer and tube connector. Respectively, max ratings for flow, pressure, and vacuum are 2.06-7.6 cfm, 14.5 psig, and 25.1 in. Hg.

AMETEK Fluoropolymer Products    Newark, DE 19702
Aug 24, 2012 With non-stick characteristics, blister prevention, and resistance to corrosion and fouling, Q-Series Fluoropolymer Tubing extends heat exchanger service life. SLIMLINE Coil heat exchangers constructed from Q-series fluoropolymer resin handle many steam heating applications without de-superheating. With optimal thermal efficiency, Q-Series SUPERCOILS are suited for most metal finishing operations, particularly those involving electroless nickel and copper plating.