Horton, Inc.
Roseville, MN 55113
Nov 05, 2009 Offered in various blade counts and configurations for first-fit applications, Shogun(TM) Modular Fans come in diameters from 16-22 in. and configurations of 6-10 equally spaced blades. Staggered blade configurations are also available, as are clockwise and counterclockwise rotation options. Featuring standard pilot sizes from 1-5 in. and pitch width of 2.44 in, fans offer max tip speed of 18,000 fpm and provide stable airflow up to 14,000 cfm.

Continental Fan Mfg. Inc.
Buffalo, NY 14215
Oct 30, 2009 Available in 48, 54, and 60 in. dia models, ADD Direct Drive Tubeaxial Fans feature housings constructed of heavy-duty welded steel with angle ring flanges and enamel paint finish. They incorporate TEFC industrial-duty motors and ELTA spark-resistant, cast aluminum airfoil impellers with factory-set adjustable-pitch blades. Externally mounted and wired junction box is also included. Fans are suited for general and process ventilation; fume, dust, and smoke removal; and for use as in-line duct boosters.

Horton, Inc.
Roseville, MN 55113
Oct 28, 2009 WindShift(TM) fans employ clamshell knuckles that clamp blades to 0.25 in. steel center disk at precise pitch angles. Customers specify blade configuration and pitch angle, center disk diameter, and rotation. Equally spaced blade configuration options are offered with 6, 7, 8, 9, 11, or 13 blades, and staggered blade configurations are available upon request. Pitch width ranges from 3.08-6.32 in. and fan diameters from 30-48 in. Rotation can be clockwise or counterclockwise.

Dyson, Inc.
Chicago, IL 60610
Oct 19, 2009 Dyson Air Multiplier(TM) fan features loop amplifier, 1.3 mm annular aperture, and airfoil-shaped ramp that amplify air motion by 15x. It also includes energy-efficient brushless motor at machine base. Available in two 10 in. models and 12 in. model, device allows air speed to be adjusted with dimmer switch.

EarthSure Corp.
Woodbridge, NJ 07095
Sep 14, 2009 Incorporated into existing air conditioning condenser or manufactured as new unit, WindAir(TM) drives warm air conditioning exhaust into secondary fan turbine system that uses electric-generating mechanism to transform wind flow into free, clean, renewable energy, which is then inverted into electric meter of home or office building. Shroud design absorbs AC units' operational sound and funnels air in concentrated fashion. Unit also protects inside components of outdoor AC units from elements.

Jaro Thermal
Boca Raton, FL 33487
Aug 31, 2009 Available in 140 mm² x 51 mm and 120 mm² x 38 mm sizes, REVOLUTION© series brushless DC fans offer 316 cfm with .83 in. static pressure and 262 cfm with 1.2 in. static pressure, respectively. Fixed blade design combined with slick air-guiding frame maximizes static pressure, while simultaneously optimizing air flow.

APS Resource
Mequon, WI 53092
Aug 24, 2009 HV-ES(TM) fan creates continuous, focused column of air that forces hot, cold, or musty air from trailer and replaces it with fresh air. Featuring 1/3 hp motor drawing 2.8 A and producing 980 cfm airflow, fan can be precisely positioned for maximum airflow using easy grip handle and dual articulating arm. Compact, low-profile design keeps fan out of way during loading/unloading while polyethylene construction withstands unexpected impacts at loading dock.

Greenheck
Schofield, WI 54476 0410
Aug 05, 2009 Available in 6 sizes with capacities up to 1,300 cfm, Model VSH vertical stack high-rise fan coil unit provides space heating/cooling for hotels, dorms, condominiums, and other multistory buildings. Units are available in concealed/exposed housing and can be configured with 2 or 4 pipe water coils and electric heaters with optional silent contactors. Features include three-speed PSC motor, 1 in. fiberglass insulation, 1 in. MERV 5 disposable filter, and front access panel to coils.

Kingston Technology Co., Inc.
Fountain Valley, CA 92708
Jun 17, 2009 Designed specifically to keep Kingston® HyperX memory cool, HyperX Fan is made of anodized aluminum with blades that are illuminated by 8 small blue LEDs when turned on. Fan uses minimal power and produces max acoustical noise of 25 dBA. It is available as standalone unit or bundled with 6 GB 2,000 or 1,800 MHz triple-channel memory kits with T1 heatspreaders for Intel Core i7 systems.

Patterson Fan
Blythewood, SC 29016
Jun 15, 2009 Patterson Shop Floor Fans are suitable for continuous operation, allowing control of air flow in 3 speeds up to 7,500 cfm on 30 in. models and 10,000 cfm on 34 in. units. They feature welded steel hulls, powder coated finish, 115 V motors, as well as semipneumatic wheels with optimized maneuverability.

Continental Fan Mfg. Inc.
Buffalo, NY 14215
Jun 11, 2009 Available in diameters from 12-42 in. and capacities ranging to 34,000 cfm, compact AFK Flange fan is made of heavy gauge steel with baked polyester coating and has airfoil adjustable pitch cast aluminum impeller. It features advanced computer selection program and can be duct mounted if needed. Suited for OEM applications or replacement fans, unit is available with GRP (polypropylene) blades and can be built for supply or exhaust configurations.

Knight Electronics
Dallas, TX 75243
May 28, 2009 Available in 12, 24, and 48 Vdc configurations and 120 x 38, 92 x 38, 80 x 38, and 60 x 38 mm frame sizes, VA Series Fans feature dual ball bearing system with brushless DC, auto restart, polarity-protected motor. Units maximize airflow even in nearly sealed enclosures, making them suited for networking and telecommunications equipment, industrial electronic cabinets, and medical imaging equipment. PWM, tachometer, alarm, and thermal control options are available.

U.S. Sunlight Corp(TM)
Livermore, CA 94550
Apr 29, 2009 Suited for existing homes as well as new construction, Solar Powered Attic Fans expel hot air from home attics, pulling cooler air in from outside without using electricity. Fans also circulate air during winter, removing damaging moisture, which can cause buildup of mold and mildew. Able to ventilate up to 1,250 ft² of attic space, units include thermal switch that turns off fan when attic temperature drops below 65° and back on when attic temperature reaches 80°.

Big Ass Fans
Lexington, KY 40575
Apr 09, 2009 Measuring 6 ft in diameter, Pivot Fan incorporates 2 independent pivot points that allow adjustment for directional airflow in 73 positions. Airfoil profile and winglet combination allow Pivot to gently distribute maximum airflow in small spaces. Featuring low-profile cage that protects both fan and occupants, Pivot is suitable for manufacturing, bottling and distribution facilities, aviation hangars, fitness clubs, schools, and firehouses.

Orion Fans/Knight Electronic
Dallas, TX 75238
Mar 24, 2009 Used for directional cooling in space-constrained applications, ODB600PT and ODB9733 Series measure 120 x 120 x 32 mm and 97 x 94 x 33 mm, respectively, and are comprised of 12, 24, and 48 V models. Each series features brushless DC motors, locked rotor and polarity protection, as well as auto restart functions. While ODB600PT blowers come in 1,800, 2,500, and 3,000 rpm speeds and feature 20-35 cfm airflow range, ODB9733 devices offer 3,300 or 5,000 rpm and 22 or 35 cfm ratings.

Continental Fan Mfg. Inc.
Buffalo, NY 14215
Mar 05, 2009 Designed for roof or wall-mounted applications, CUB Belt Drive Upblast Exhaust Fans are constructed with weather-resistant spun aluminum housing and aluminum blades and inlets. Units feature backward inclined, non-overloading wheels; fully ventilated motor cooling compartment; fully welded, leak-proof grease drain, and 300°F max temperature rating. Variable pitch motor pulley allows for field adjustment and system balancing.

Orion Fans/Knight Electronic
Dallas, TX 75238
Mar 04, 2009 Available in 3-, 6- and 9-fan versions as well as in custom configurations, fan trays operate from 12-48 Vdc and 115-230 Vac; with dual voltage Vac fans also available. Each fan may be equipped to adjust its speed in direct relation to ambient air temperature from 55-100% of full speed to optimize fan life, conserve energy, and minimize noise. Constructed of heavy-duty steel with extruded aluminum side rails, tray feature EZ-mount clip nuts and fasteners and are UL/cUL-recognized.

NMB Technologies Corp.
Chatsworth, CA 91311
Feb 26, 2009 Designed for PC, servers, telecommunications, and networking equipment, 1611RL fixed blade axial dc fan can operate under static pressure levels of up to 1.6 in. H₂O. RoHS compliant fan is available in 12 Vdc, 7.4 W, 0.62 A, and 60 dbA. It has maximum CFM of 19.4, and includes NMB ball bearings, alarm sensor, and PWM.

Continental Fan Mfg. Inc.
Buffalo, NY 14215
Feb 11, 2009 Available in single phase 115 V, CDD downblast exhaust fans deliver direct drive capacities to 2,750 cfm. They feature spun aluminum weather resistant housing, blades and inlets fabricated from aluminum, bird screen, and wire conduit that provides protected channel for electrical connections. Rated for 110°F, fans offer variable speed control and backward inclined, non-overloading wheels. Options include gravity damper, motorized damper, wall mount sleeve, and roof curb.

Labconco Corp.
Kansas City, MO 64132 2696
Feb 09, 2009 Available in 2, 3, 4, 5, and 6 ft widths, self-contained Paramount® Ductless Enclosures use 6 different carbon stackable filter types to allow safe handling of organic, formaldehyde, acid gas, sulfur compounds, or ammonia chemical fumes and vapors. HEPA filters with 99.99% efficiency may be used to handle different types of chemicals and particulates during same application. Unlike traditional fume hoods, filtered, tempered air is returned to room, eliminating energy waste.