Saelig Co., Inc.
Pittsford, NY 14534
Apr 17, 2008 Featuring user-programmable alarm thresholds for T and RH%, EL-USB-RT USB-connected sensor can measure temperature from -10 to +60°C and 0-100% RH when plugged into USB port of PC installed with purpose designed software. PC displays temperature, humidity, and dew point in real-time and saves it to file that can store up to 7 days' worth of data. Software allows user to save data file permanently to hard drive and data can be graphed, printed, and exported to other applications.

Omega Engineering, Inc.
Stamford, CT 06907
Apr 17, 2008 Designed for process temperature control, freeze protection, and supplemental heat, HTWAT series tapes offer adjustable thermostat control up to 425°F and are resistant to moisture as well as chemicals. In addition to being suited for electrically conductive surfaces, CE-compliant products can be used on valves, pipe lines, bearings, filter housings, and actuators. Areas of use include manufacturing, construction, petroleum, and public works industries.

Shini USA
Willoughby, OH 04094
Apr 15, 2008 Air Cooled and Water Cooled Portable Chillers are designed to circulate fluid medium for continuous process cooling between 42-65°F. They includes scroll compressor, hot gas by-pass valve, liquid line solenoid valve, thermal expansion valve, and controller. Available in capacities from 3-40 tons with 230 or 460 V, chillers have copper tubing on all instruments and gauges and include separate high and low refrigeration liquid-filled pressure gauges.

Eximo
Smithfield   Australia
Apr 15, 2008 Unimaster dust control unit is suited for range of nuisance dust problems encountered during industrial processes. Contaminated air is drawn through inlet to filter by fan, with heavier dust particles falling into collection bin or hopper and finer dusts carried up to flat envelope shaped, multipad filter. When fan is switched off, filter fabric cleaning cycle is automatically activated and dust is dislodged by oscillating motion of shaker motor.

Thomas Products Division
Sheboygan, WI 53081
Apr 14, 2008 RL Series Rotary Lobe Blower delivers air flow up to 1.90 cfm, pressure to 2 psi, and vacuum to 4 in. hg. It can be mounted vertically or horizontally and is equipped with standard 3/8 in. OD hose barbs and 6 in. wiring harness. Featuring 12 V brushless dc motor and permanently lubricated timing gears, contactless blower is suited for fuel cells, laboratory pressure and vacuum sources, air samplers, gas boosting, and variety of portable air-moving devices.

SCHMIDT Technology GmbH
St. Georgen D-78112  Germany
Apr 11, 2008 Featuring 9 mm SS tube, SS 23.400 ATEX3 Thermal Flow Sensor can measure flow velocity and detect direction of clean air and gas flow. It offers atmospheric pressure range of 700-1,300 hPa and power supply range of 12-24 Vdc. Including 2 switching outputs to indicate flow direction and limit value, microcontroller based unit provides serial interface that allows on-site programming via PC and adaptation of response time, threshold, and switching polarity to operation requirements.

Moffitt Corp., Inc.
Jacksonville Beach, FL 32250
Apr 10, 2008 Offering green alternative to exhaust fans, GreenRoo provides 5,000-10,000 cfm of airflow without use of electricity. Wind-driven solution has maintenance-free design, incurs no electrical installation or operating costs, and incorporates Varipitch component to make it usable on any roof slope. Made of aluminum and SS, product can be powder-coated and comes in throat diameter sizes of 12, 24, and 36 in. - all weighing less than 70 lb.

Diversified Heat Transfer, Inc.
Ridgewood, NY 11385
Apr 10, 2008 Coils are manufactured from tube materials consisting of copper, 90/10 cupronickel, SS, or carbon steel. Steam Coils have standard steam and steam distributing coils. Also available are industrial HVAC heating and cooling air-handling coils and plate fin, helical fin, L-footed, and solder-bonded air coils with 3/8-1 in. OD tubing for steam and water applications. Econo Line shell and tube heat exchangers, 4-30 in., are offered in steam-to-liquid or liquid-to-liquid styles.

Royal Products, Div. Curran Mfg. Corp.
Hauppauge, NY 11788
Apr 10, 2008 With compact design for mounting flexibility, Royal FX Filtermist 9th generation devices feature heavy-duty Baldor motor that meets all federal, state, and local electrical and safety codes; oil return channel; and curved drum vanes. Gap between drum housing has been optimized for maximum filtration efficiency and conical air deflector positioned at intake accurately controls airflow within unit.

Saelig Co., Inc.
Pittsford, NY 14534
Apr 09, 2008 Available in 9 x 8 mm size, UPSICAP(TM) passive and active sensors feature 4-layer construction to resist effect of condensation and water immersion on their accuracy or response time. Featuring MSS bi-face(TM) technology, devices can operate from 0-100% RH and in -90 to +85°C temperature range. Output frequency varies with humidity (7.2-5.8 kHz) and temperature is accurately indicated optionally by NTC variable resistance, linear platinum sensor, or linear voltage output consuming less than 1 mW.

Marmion Industries Corp.
Houston, TX 77040
Apr 09, 2008 Built to address hazardous industrial environments with limited wall space, STALLION Series air conditioner units come in general-purpose and classified models with or without purge. Ultra-compact units are offered in 2-10 ton cooling capacities, are stackable, rackable, and redundant.

TandD US, LLC
Saratoga Springs, NY 12866
Apr 09, 2008 RTR-61 Wireless/Waterproof Data Logger features single pushbutton data capture that logs time, date, temperature, operator ID, and item ID. Capable of storing up to 1,800 readings, it includes LCD that reads current value. Penetration Probes are available either 5 or 10 in. long and can be attached directly to logger or to handle with 36 in. cable. Stored data can be downloaded to PC or through LAN using optional communications set.

Atlas Copco Compressors, Inc.
Westfield, MA 01085
Apr 07, 2008 Able to operate in ambient temperatures to 131°F, GA Series Oil-Injected Compressors feature compression elements based on asymmetric rotor profiles. Optimization of oil injection, flow, and temperature keeps compression process at coolest possible temperature to minimize thermodynamic loss. Additional energy-saving elements include use of radial fans with Variable Speed Drive regulation, efficiency-optimized motors, and no-loss drains. Air quality is provided by oil removal system and dryers.

Dometic Environmental Corporation
Pompano Beach, FL 33069
Apr 01, 2008 Developed as solution to reduce idling while waiting to load and unload at terminals, CARB-compliant, 7,000 BTU auxiliary air conditioning system provides 2 hr of cooling on battery power. It utilizes bank of Group 31 absorbed glass mat batteries and emits no exhaust. System consists of compressor/evaporator/blower unit that fits between seats, external condensing unit that mounts on back of cab or under truck, and inside unit with molded composite cover for protection and noise control.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Mar 31, 2008 Omega G Series gas-tight rotary blowers feature double piston ring and hardened-steel gas and oil seals. Vents may be piped back to suction or purged for single envelope, gas-tight operation. Input shaft double lip seals with oil barrier prevent air ingress and gas emissions, while mounted and piped reservoir provides visual indication of seal condition. Units are available in flows to 5,400 cfm at pressures up to 15 psi or vacuum up to 15 in. Hg.

Lochinvar Corp.
Lebanon, TN 37090
Mar 27, 2008 Available in 5 models and sizes, Squire Indirect Water Heater eliminates need for additional gas line, electrical connections, and vent ducts required with direct-fired, tank-type water heaters. Unit features 304 SS heat exchanger coil, 2 in. thick insulation, and plastic jacket that provide rustproof finish, even in wet and corrosive environments. When used with high-efficiency condensing boiler, Squire uses energy generated to heat home to also heat domestic water.

Degree Controls Inc.
Milford, NH 03055
Mar 26, 2008 Ruggedized to meet both Mil-STD-461 and Mil-STD 810F testing requirements, fully configurable Thermal Controllers leverage proprietary software allowing for programmable alarm thresholds and fan curves. On-board microcontroller monitors and controls fan speeds, communicates with host through serial interfaces, measures temperatures, detects filter blockages, and reports alarms.

Next Generation Power Engineering, Inc.
Jacksonville, FL 32246
Mar 25, 2008 Measuring 38 x 24, x 45 in., KS3030 Diesel Air Compressor combines 12 hp, 2-cylinder, water-cooled Kubota Z482 engine and powder-coated Schulz compressor mounted on top of 30 gal, ASME-code air receiver. It does not require separate fuel supply from diesel-powered service vehicles; it runs on same fuel system and produces air flow volume of 30 cfm @ 175 psi (35 cfm @ 100 psi). With no electronic components, product is suited for use in outdoor conditions.

Celsia Technologies
Miami, FL 33131
Mar 25, 2008 NanoSpreader Vapor Chambers are 2-phase chambers into which pure water is vacuum-sealed, absorbed by copper wick, and passed as vapor through micro-perforated copper sheet and returned as liquid to wick. Contained in packages from 1.5-70 mm, they attach directly to heat source and can cool power densities up to 150 W/cm² while offering multidirectional thermal spreading as low as 0.02°C/W. Units can withstand clamping forces up to 90 psi and repeated exposure from -40 to +100°C.

Orion Fans/Knight Electronic
Dallas, TX 75238
Mar 24, 2008 Designed for electronic equipment and industrial enclosures, ac fan series OA109AP-11/22 measure 120 x 38 mm and can be configured to operate on 115 or 230 V. Fans are constructed from diecast aluminum and have UL94V-0 glass fiber reinforced thermoplastic impellers. Models are available in standard 3000rpm/110cfm airflow/15watts, 2300rpm/71cfm airflow/11watts, and 1600rpm/51cfm airflow/8watts. Also available are dual and sleeve bearing versions.