New HVAC Products

Roof Supply Fans come with washable aluminum filters.

Models RSF and RSFP centrifugal filtered roof supply fans feature forward curved centrifugal wheels. Performance capabilities range from 650 to 14,300 cfm and up to 2 in. wg of static pressure. Model RSF has straight-sided hood, and is designed to provide unrestricted airflow and maximum weather protection. Model RSFP adds louvered penthouse with mitered corners, and is designed to provide...

Fans provide low blade tip noise and quiet operation.

8X Series Multi-Wing Fans feature twisted broad paddle profile blade which produces high air volume and pressure at low speeds. They are made with fiberglass reinforced polypropylene blades and cast-aluminum hubs. Corrosion-resistant materials provide service in harsh environments such as HVAC and chemical applications. Fans are available with 3, 4 or 5 blades, with adjustable blade pitch. Any...

Blowers, Fans and Thermostat come in different models.

3-phase 200 to 230 Vac blower models MB810-T and MB1225-T have impeller diameters of 3.15 and 4.72 in., respectively. MB810-T produces maximum airflow of 56.5 cfm at 2800 rpm to 63.6 cfm at 3350 rpm, while MB1225-T produces 155 cfm at 2850 rpm to 184 cfm at 3300 rpm. MBD Series DC centrifugal blowers include blowers with both 3.15 and 3.94 in. impeller diameters. Airflows range from 51.2 cfm at...

Fuel Gas Heaters warm up natural gas.

Skid-mounted heaters preheat natural gas to keep it above dewpoint before combustion. They are prewired for ease of installation and are available for Class 1, Div 1 or 2 locations. Heaters have low watt density for long life, digital temperature control using silicon controlled rectifiers to maintain tight temperature, and are well insulated for low heat loss. They produce no emissions and are...

Industrial Applications for Infrared Heaters

This ebook discusses the various industrial applications for infrared heaters, including glass manufacturing, textiles, plastic & film, metals, and more.

Refrigerant protector prevents pump-out.

Purge-Guard, for all low-pressure centrifugal chiller purge units, works independently of purge units' purge-fault protection. In the event of problems such as stuck pump-out compressor relay contacts, locked-up microprocessor, or purge unit set in manual mode and accidentally left unsupervised, Purge-Guard prevents accidental pump-out of either liquid or vapor refrigerant.

Folded Covers protect equipment.

Folded covers are available in wide range of materials to suit environment, from light duty dust to harsh abrasives. They have internal support system consisting of stiffeners or ribs made from rigid PVC and die cut to fit guide configurations of equipment to be protected. Folded bellows have maximum open-to-close ratio, useful in limited space. Mounting end plates can be engineered and...

Flexible Discs grind and blend in one step.

Cotton fiber layers in Cut-N-Finish discs are impregnated with aluminum oxide grains and then pressed and bonded together, so discs constantly reveal fresh abrasives as they work. Suitable for edge grinding, surface blending, and working fillet welds on stainless steel and aluminum, discs are available in 4 1/2 and 7 in. sizes, and in A24, A36, A54, and A80 grit sizes in both flexible and medium...

Underfloor Fan installs between raised floor pedestals.

Energy efficient Model UFT variable speed fan accommodates varying heating and cooling loads in perimeter zone and interior rooms. It delivers up to 1798 cfm. Units are available with hot water or electric reheat coils to offset cold downdrafts at exterior of building. For interior rooms, where only cooling is required, units without reheat coils may be specified.

Brushless DC Blower cools compact electronics.

Measuring 5.30 in. square by 1.35 in. deep, Airbox DC Blower delivers 30 cfm and static pressure of 0.7 in. of water, while generating minimal noise of 46.6 dB. ThermaPro-V(TM) technology automatically adjusts airflow based on temperature needs. Automatic restart feature ensures operation will resume after power failure or overheating. Both housing and polypropylene impeller meet UL 94V-0...

Contour Control has digital motor control.

iTNC 530 establishes new standards for high-speed cutting in short block processing times and optimum path control. Unit offers fixed cycles that simplify programming. It has a block processing time of 0.5 ms. Programs written at remote locations can be transmitted over an Ethernet interface. Applications include manufacturing single parts or series production, simple and complex workpieces, tool...

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.